Tin Coated Carbide
July 5th, 2011
what is PCB Prototype
Guidelines on setting up PCB prototype
PCB Prototypes are applied to help and connect digital parts using conductive pathways and tracks from copper sheets which are laminated into a non-conductive substrate. PCB Prototypes are quite reliable and also they are less pricey.
As the engineering improved, these prototypes and prototyping have grow to be the mainly used methods..
At present there are many PCB manufacturers who can supply this film .Advantage of this technique is that in a few measures one particular can develop their very own pcb prototype inside of a minute.
Press n peel provides the capacity to take magazines and generated PCB layouts and exchange of image into copper clad printed circuit by utilizing iron.
PCB fabrication method in quite complicated and at times it is time consuming.In PCB fabrication procedure initial action is to transfer the schematic from the magazine to the layout system. Right after this action, PCB layout system is employed to place the parts on the board mark the route on the copper traces.
Ultimately when the layout is carried out ,the board layer is printed into the unique toner exchange paper with a laser printer .After laminating paper presented in the board is taken off leaving only the toner. Lastly soon after laminating the toner is eliminated and board is tinned making use of a soldering iron.
Tinning is accomplished due to the fact it improves the look of the board and also prevents the copper from oxidizing .Now holes are drilled for any leaded ingredients and mounting holes.
Precious metal Phoenix PCB CO., LTD is one particular of the leading PCB board manufacturers, which is a branch of Gold Phoenix. It is located in china. Gold Phoenix PCB CO.,LTD provides copper thickness upto 6 oz, substantial frequency based and consumer specified PCB’s.
Precious metal Phoenix has far more than 200 very talented employees .Their primary objective is to present complete consumer help.
There are three methods applied for the production of printed circuit boards they are -silk display printing , photoengraving and pcb milling. In some pcb’s trace layers introduced inside the layer and they are referred to as multi layer pcb’s . Holes are generally drilled with tiny drill created up of solid tungsten carbide.pcb’ are plated with solder, tin or rare metal above nickel .After pcb is finished, electric parts should be attached to form a functional circuit assembly.
In pcb the coat stops corrosion and also it prevents leakage of currents. When handling pcb boards , user should be grounded otherwise board may be damaged.
Find out more information about PCB prototypes here.
About the Author
For more useful and valuable pcb prototypes information you will need<br />to visit http://www.almatron.com/<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
Drill Doctor Model 500 & 750 Part 1 of 2
|
|
10 New ANC TNMG 431 TNT C5 Tin Coated Carbide Inserts $39.95 |
|
|
39 New ANC TNMG 432 123 C2 Tin Coated Carbide Inserts $115.50 |
|
|
10 New USA made TPG 432 C5 Tin Coated Carbide Inserts $56.95 |
|
|
10 New USA made GC 4187 C5 Tin Coated Carbide Inserts $120.00 |
|
|
Dormer Drill R002 – 7.40mm Dia Carbide Tin Coated Drill $15.78 |
|
|
CARBIDE 1/8 2 FLUTE STUB LENGTH END MILL 1/8 SHANK NIAGARA USA NEW TIN COATED $9.95 |
|
|
CARBIDE 1/2 2 FLUTE STUB LENGTH END MILL 1/2 SHANK NIAGARA USA NEW TIN COATED $15.95 |
|
|
Carbide End Mills 1/2 4 Flute Ball Nose Al-Tin coated New lot of 5 pcs USA Made $129.99 |
|
|
27/64 Jobber Length General Purpose Carbide Drill TiN Coated Drill NEW Garr Too $24.95 |
|
|
NEW 10PCS TPG-544 TIN COATED CARBIDE INSERTS $58.20 |
|
|
++1.00 x 6.00 OAL X 2″ LOC SOLID CARBIDE TIN COATED “USED BUT SHARP” $29.00 |
|
|
3/32″ 2 Flute Carbide Endmill Flat Bottom TiN coated $3.90 |
|
|
++1.00 x 6.00 OAL X 3″ LOC SOLID CARBIDE TIN COATED “USED BUT SHARP” $33.00 |
|
|
10 PCS SNMG 432 C5 TIN COATED CARBIDE INSERTS NEW $18.95 |
|
|
Titan 1/2″ Cylindrical Ext. Solid Carbide Burrs Tin Coated SA-5 TB19567TIN 227SO $79.99 |
|
|
Titan 3/4″ Round Nose Tree Solid Carbide Burrs Tin Coated SF-7 TB19405TIN 215SO $98.99 |
|
|
BRAND NEW 6pc Guhring Solid Carbide 3.6mm DIN 6539 Tin Coated 207SO $39.99 |
|
|
Titan 3/8″ Pointed Cone Solid Carbide Burrs Tin Coated SM-4 TB19442TIN 219SO $39.99 |
|
|
Titan 1/2″ Cylindrical End Solid Carbide Burrs Tin Coated SB-5 TB19341TIN 221SO $31.99 |
|
|
Titan 3/4″ Cylindrical Ball Solid Carbide Burrs Tin Coated SC-7 TB19380TIN 217SO $229.99 |
|
|
Titan 1/2″ Egg Shape Solid Carbide Burrs Tin Coated SE-5 TB19461TIN 220SO $14.99 |
|
|
10 PCS TNMG 431 C5 TIN COATED CARBIDE INSERTS NEW $19.95 |
|
|
10 PCS TPG 322 C5 TIN COATED CARBIDE INSERTS NEW $15.95 |
|
|
Sumitomo 1-5/32″ Carbide Tipped TIN Coated Coolant Fed Drill Bit German New $102.00 |
|
|
10 PCS SNMG 432 C5 TIN COATED CARBIDE INSERTS NEW $14.95 |
|
|
NEW MA FORD SOLID CARBIDE METRIC DRILL 18mm TiN Coated USA .7086 18.00 mm $110.15 |
|
|
7PC SET, SIZES 1/8″ – 1/2″ CARBIDE 118-DEG. JOBBER LENGTH DRILL SET – TiN COATED $247.50 |
|
|
Melin Countersink TiN Coated Carbide 3/4″ Size 1/2″ Shank 6 Flutes HSP6-3/4-60T $16.99 |
|
|
1/4″ Sumitomo 2656MV Solid Carbide TiN Coated HP Drill (#381) $17.99 |
|
|
Carbide End Mills 1/2″ Diameter 4 Flute Tin Coated Very Lightly Used 9Pcs Total $16.28 |
|
|
10 PCS TPG 322 C5 TIN COATED CARBIDE INSERTS NEW $15.95 |
|
|
10 PCS TNMG 431 C5 TIN COATED CARBIDE INSERTS NEW $19.95 |
|
|
NEW SURPLUS SUMITOMO SOLID CARBIDE DRILL .4040″ 4040ME (TiN COATED) $50.75 |
|
|
10 PCS SPG 433 C2 TIN COATED CARBIDE INSERTS VR WESSON 1/26/12 $9.95 |
|
|
10 NEW VALENITE CARBIDE INSERTS CNMG 432-F2 VP5515 NIB Tin Coated $89.45 |
|
|
Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ba $9.99 |
|
|
Pack of 10 New Kennemetal Carbide Inserts NG3156LK – Grade KC730 TiN Coated $19.00 |
|
|
NEW 10PCS WNMG-433 TIN COATED CARBIDE INSERTS $36.50 |
|
|
++1.00 x 6.00 OAL X 2″ LOC SOLID CARBIDE TIN COATED “USED BUT SHARP” $29.00 |
|
|
NEW TUNGALOY 6.2mm Solid Carbide Coolant Drill .2441″ TiN Coated $55.20 |
|
|
VALENITE SPG 633 SPGN 190412 5045 CARBIDE INSERTS TIN COATED $35.00 |
|
|
7.50mm Carbide Tin Coated Oil Feed Drill Made by Dormer – code no R457 $45.02 |
|
|
NEW SUMITOMO CARBIDE TIPPED COOLANT FED DRILL 14.50MM KDS .5709″ Tin Coated $89.45 |
|
|
Korloy SDCN53PDR TiN Coated #8063197 Carbide Milling Inserts $198.99 |
|
|
NEW 10PCS SEAN-42 AFN TIN COATED CARBIDE INSERTS $31.00 |
|
|
10 PCS TPG 321 C5C TIN COATED CARBIDE INSERTS NEW $17.50 |
|
|
100 PCS TPG 321 C5C TIN COATED CARBIDE INSERTS NEW $175.00 |
|
|
10 PCS CNMG 431 C5C TIN COATED CARBIDE INSERTS NEW $18.95 |
|
|
100 PCS CNMG 431 C5C TIN COATED CARBIDE INSERTS NEW $189.95 |
|
|
100 PCS TCMT 3252 C5C TIN COATED CARBIDE INSERTS NEW $211.90 |
|
|
3/16 Spade Drill, (.1875″) Solid Carbide GARR, 5 pcs, TIN Coated $8.00 |
|
|
14.5 MM SOLID CARBIDE DRILL, CLEVELAND TIN COATED (D-1-5-8)(VS) $121.14 |
|
|
13/32 SOLID CARBIDE DRILL METCUT SLOW SPIRAL TIN COATED (D-1-5-7-VS) $52.43 |
|
|
Interstate TPG 2521 Carbide Insert Gold TiN Coated New $4.99 |
|
|
CARBIDE INSERT MANCHSTER 507-118-30 TIN COATED GRADE GC 10 PACK NEW $27.50 |
|
|
CARBIDE INSERT MANCHSTER 508-214-30 TIN COATED GRADE GC 10 PACK NEW $35.00 |
|
|
Lot of 5 Mill Monster Solid Carbide 3/8″ TiN Coated 4 Flute End Mills NEW $62.99 |
|
|
Niagara 4 Flute Solid Carbide Tin Coated 5/16″ X 5/16″ X 2 1/2″ $10.00 |
|
|
Niagara Flute Carbide End Mill “Double End” Tin Coated 5/32″ X 1/4″ $10.00 |
|
|
23MM GUHRING Carbide Coolant Drill, 2F, Tin Coated. $80.00 |
|
|
19.16MM KENNAMETAL Carbide Coolant Drills, 2F, Tin Coated, KC7040 $135.00 |
|
|
51/64″ AMEC 1C21T-.796 SPADE DRILL INSERT C2 CARBIDE TiN COATED #1 SERIES TA T-A $13.00 |
|
|
NEW 10PCS TPGB-221 TIN COATED CARBIDE INSERTS $19.00 |
|
|
NEW 10PCS SEAN-43 AFTN TIN COATED CARBIDE INSERTS $31.00 |
|
|
NEW 10PCS CCMT-21.51 TIN COATED CARBIDE INSERTS $24.00 |
|
|
NEW 10PCS TPGB-322 TIN COATED CARBIDE INSERTS $19.00 |
|
|
NEW 10PCS CCMT-21.50 TIN COATED CARBIDE INSERTS $24.00 |
|
|
NEW 10PCS DCMT-32.52 TIN COATED CARBIDE INSERTS $26.00 |
|
|
NEW 10PCS GTR-4 TIN COATED CARBIDE INSERTS $55.00 |
|
|
NEW 10PCS CCMT-32.50 TIN COATED CARBIDE INSERTS $25.00 |
|
|
NEW 10PCS CCMT-21.52 TIN COATED CARBIDE INSERTS $24.00 |
|
|
3/4 NIAGARA CARBIDE ENDMILL TIN COATED 3 FLUTE 61663 VERY GOOD CONDITION $45.00 |
|
|
3/8 ball carbide endmill Tin coated .375 dia stub 3 flute New MFG $25.00 |
|
|
KENNAMETAL KENDEX CARBIDE TIN COATED INSERTS ~NEW~SURPLUS~ $89.95 |
|
|
(Lot of 50) Cobra Carbide SNMG 432 TIN Coated Carbide Inserts $79.99 |
|
|
NEW Niagara 9/32″ Carbide End Mill 4FL TiN Coated $16.00 |
|
|
Komet W27 Carbide Inserts 14 pcs. tin coated W2712 0100464 $14.99 |
|
|
Drill Doctor Bit Sharpener Replaceable Diamond Wheel Masonry Carbide TiN Coated $154.95 |
|
|
NEW Kennametal SE Size #1 Solid Carbide Subland Step Drill Tin Coated .2280″ $59.00 |
|
|
TPG-321A TIN COATED HARD-CUT CARBIDE INSERTS 10 PCS NEW $22.50 |
|
|
CCMT 32.51 C5 TIN COATED CARBIDE INSERTS NEW 100 PCS $159.95 |
|
|
NEW Robb Jack 1/2″ Solid Carbide End Mill 4 Flute TiN Coated $36.00 |
|
|
NEW 10PCS SEAN-42 AFTN TIN COATED CARBIDE INSERTS $31.50 |
|
|
NEW 10PCS KNUX 160405 R11 TIN COATED CARBIDE INSERTS $32.50 |
|
|
Garr Tool ball end mill carbide Tin coated # 51G272T108 $75.00 |
|
|
new M.A. FORD Hi-Tuff CARBIDE DRILL No. 26 TIN Coated $6.75 |
|
|
7MM 4 FLUTE SOLID CARBIDE TINCOATED ENDMILL (W360-2) $20.50 |
|
|
Lot of 5 SGS Solid Carbide 7/32″ TiN Coated 4 Flute End Mills NEW $59.99 |
|
|
NEW Mitsubishi 1/4″ Solid Carbide Drill MZE2500MA TiN Coated $31.20 |
|
|
NEW 10PCS USA CPMT-332 TIN COATED CARBIDE INSERTS $18.99 |
|
|
NEW OSG CARBIDE END MILL 22MM X 22MM 2FL TIN COATED $48.00 |
|
|
TELEDYNE FIRTH STERLING 10 PACK TIN COATED CARBIDE INSERTS TPG543 TPG 543 $23.00 |
|
|
TELEDYNE FIRTH STERLING 10 PACK TIN COATED CARBIDE INSERTS TPG543 TPG 543 $23.00 |
|
|
Korloy TPKN32PPTR Tin Coated Carbide Inserts Box of 10 $127.99 |
|
|
TELEDYNE FIRTH STERLING 10 PACK TIN COATED CARBIDE INSERTS TPG543 TPG 543 $22.00 |
|
|
Korloy TPKN32PPTR Tin Coated Carbide Inserts Box of 8 $111.99 |
|
|
1/8″ CARBIDE 118-DEG. JOBBER LENGTH DRILL – TiN COATED USA MADE 450-101250A $10.50 |
|
|
3/16″ CARBIDE 118-DEG. JOBBER LENGTH DRILL – TiN COATED USA MADE 450-101875A $15.50 |
|
|
1/4″ CARBIDE 118-DEG. JOBBER LENGTH DRILL – TiN COATED USA MADE 450-102500A $22.47 |
|
|
5/16″ CARBIDE 118-DEG. JOBBER LENGTH DRILL – TiN COATED USA MADE 450-103125A $33.02 |
|
|
End Mill Set, 6 Piece 4 Flute $20.95 The set comes in a wood stand…. |
|
|
End Mill Set, 20 pieces 2 & 4 Flute $49.90 The 3/16″ through 7/16″ end mills have a 3/8″ shank. The 1/2″ and 9/16″ end mills have a 1/2″ shank. The 5/8″ and 11/16″ end mills have a 5/8″ shank. The 3/4″ end mill has a 3/4″ shank. The set comes in a fitted case…. |
|
|
End Mill Set, 10 pieces 2 & 4 Flute $36.95 This 10 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The set comes in a fitted case…. |
|
|
Iscar APKT 100312 TR RM IC635 Carbide Insert Box of 10 Iscar Indexable Milling Inserts: APKT 100312 TR RM IC635 TiN Coated Carbide… |
|
|
Iscar APKT 100312 TR RM IC250 Carbide Insert Box of 10 Iscar Indexable Milling Inserts: APKT 100312 TR RM IC250 TiN Coated Carbide… |
|
|
Tin Coated Drill #31 Drill $4.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill #28 Drill $4.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill #29 Drill $5.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill #33 Drill $6.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill #36 Drill $7.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill #43 Drill $4.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill #45 Drill $7.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill #42 Drill $5.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill 1/8" Drill $6.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill 3/16" Drill $7.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Tin Coated Drill 1/4" Drill $10.99 TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. |
|
|
Plews 75-009 Utility Tin-Coated Funnels $7.37 Plews 75-009 Utility Tin-Coated Funnels Plews 75-009 Utility Tin-Coated Funnels Features: Lightweight, general purpose tin-coated funnels 75-009: 10 oz capacity, 5-1/2″ total height, 4-1/2″ diameter, 1/2″ outside diameter tip 75-010: 24 oz capacity, 6-1/2″ total height, 5-3/4″ diameter, 1/2″ outside diameter tip 75-012: 56 oz capacity, 9″ total height, 8″ diameter, 1″ outside diameter tip |
|
|
Plews 75-012 Utility Tin-Coated Funnels $8.87 Plews 75-012 Utility Tin-Coated Funnels Plews 75-012 Utility Tin-Coated Funnels Features: Lightweight, general purpose tin-coated funnels 75-009: 10 oz capacity, 5-1/2″ total height, 4-1/2″ diameter, 1/2″ outside diameter tip 75-010: 24 oz capacity, 6-1/2″ total height, 5-3/4″ diameter, 1/2″ outside diameter tip 75-012: 56 oz capacity, 9″ total height, 8″ diameter, 1″ outside diameter tip |
|
|
Ingersoll-Rand 8 Piece Carbide Burr 1/4” Shank 1/2” Head $148.95 Our most popular 1/4” shank burrs in four different shapes. These TiN coated carbide burrs are provided in a durable storage box that makes it easy to keep the burrs organized.Features:? 1/4” shank titanium nitride coated carbide burrs? Four different shapes: cylidrical, ball-nosed cylindrical, ball & ball-nosed tree? 1/2” & 3/8” head diameters? 5” x 2.75” x 3.75” dimensions? 1.5 lb weight |
|
|
JET 650211 20-Piece TiN Titanium Nitride Coated Single End Mill Set $109 20-Piece TiN Titanium Nitride Coated Single End Mill Set – 650211 |
|
|
75-009 – 10Oz Tin Coated Funnel $12.07 [6216048] UPC: 028893750093 4.75L x 4.75W x 10.25H 0.12 LB 0.13 Cubes |
|
|
75-011 – 32Oz Tin Coated Funnel $13.8 [7021124] UPC: 028893750116 6.75L x 6.75W x 12H 0.23 LB 0.32 Cubes |
|
|
75-012 – 56Oz Tin Coated Funnel $15.04 [570-75-012] UPC: 028893750123 8L x 8W x 13H 0.33 LB 0.48 Cubes |
|
|
DeWALT DW4843 8 Carbide-Coated Reciprocating Saw Blade $14.64 DeWALT DW4843 8″ Carbide-Coated Reciprocating Saw Blade DEWALT is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. DEWALT tools can be found wherever tools are sold, nationally and internationally. DeWALT DW4843 8″ Carbide-Coated Reciprocating Saw Blade Features: 8″ Carbide-Coated Reciprocating Saw Blade Medium carbide grit offers the ability to cut in hard materials. Blade Type: Coarse Carbide Grit Blade Length: 8 |
|
|
DeWALT DW4844 6 Carbide-Coated Reciprocating Saw Blade – Coarse $10.88 DeWALT DW4844 6″ Carbide-Coated Reciprocating Saw Blade – Coarse DEWALT is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. DEWALT tools can be found wherever tools are sold, nationally and internationally. DeWALT DW4844 6″ Carbide-Coated Reciprocating Saw Blade – Coarse Features: 6″ Carbide-Coated Reciprocating Saw Blade (Coarse) Medium carbide grit offers the ability to cut in hard materials. Blade Type: Coarse Carbide Grit Blade Length: 6 |
|
|
Ingersoll Rand 6 Piece 1/4" Shank, 3/8" Head, Carbide Burr Kit. Each $96.05 Manufacturer: Ingersoll Rand. Each. Features Benefits Titanium Nitride coated 1/4″ shank 3/8″ head size with various shapes Maximum operating speed of 40,000 RPM Convenient softsided case included Ingersoll Rand carbide burrs are Titanium Nitride (TiN) |
|
|
Ingersoll Rand 6 Piece 1/8" Shank, 1/4" Head, Carbide Burr Kit. Each $43.22 Manufacturer: Ingersoll Rand. Each. Features Benefits Titanium Nitride coated 1/8″ shank 1/4″ head size with various shapes Maximum operating speed of 40,000 RPM Convenient softsided case included Ingersoll Rand carbide burrs are Titanium Nitride (TiN) |
|
|
Ingersoll Rand 6 Piece 1/8" Shank, 1/8" Head, Carbide Burr Kit. Each $32.93 Manufacturer: Ingersoll Rand. Each. Features Benefits Titanium Nitride coated 1/8″ shank 1/8″ head size with various shapes Maximum operating speed of 40,000 RPM Convenient softsided case included Ingersoll Rand carbide burrs are Titanium Nitride (TiN) |
|
|
Blair 14006 Carbide Coated Hole Saw Kit $151.33 Carbide Holcutters are carbide tipped to offer improvedperformance and increased tool life in tough to cutmaterials such as stainless steel. These cutters easily cutthru the stock rather than ripping tearing and pushingthru as do typical hole saws. Dramatically outlasts bimetalhole saws and step drills.All cutters include arbor pilot and ejector spring. Thearbor fits 3/8 amp; 1/2 drill chucks. 7/8 11/8 13/8 13/4 2 amp; 21/2 Cutters Arbor amp; Extra Pilot |
|
|
Tin Coated Pewter Embossing Foil 9 1 4 in. x 12 in. $8.09 MercArt metal foils are specifically manufactured for embossing, possessing ideal temper and gauge for artistic use. Tin Coated Pewter is the most flexible and easy metal foil to work with. It?s perfect for embossing and for achieving volume.Tin Coated Pewter foil is available in rolled sheets of two sizes: 9 1/4 in. x 12 in. and 18 1/2 in. x 36 in. |
|
|
Tin Coated Pewter Embossing Foil 18 1 2 in. x 36 in. $54.42 MercArt metal foils are specifically manufactured for embossing, possessing ideal temper and gauge for artistic use. Tin Coated Pewter is the most flexible and easy metal foil to work with. It?s perfect for embossing and for achieving volume.Tin Coated Pewter foil is available in rolled sheets of two sizes: 9 1/4 in. x 12 in. and 18 1/2 in. x 36 in. |
|
|
Galvanized Tin Window Box $72.99 Galvanized Tin Window Box. Finish/Material: Powder Coated – Green Patina. Manufacturer: ACHLA Designs. Brand: ACHLA Designs. Part Number: VFB-06. UPC: 719908313326 |
|
|
Ingersoll Rand IRT1818TiN 6 Piece 1/8 Inch Shank 1/8 Inch Head Carbide Burr Kit $49.73 Features and Benefits Titanium Nitride coated 1/8 shank 1/8 head size with various shapes Maximum operating speed of 40 000 RPM Convenient softsided case included Ingersoll Rand carbide burrs are Titanium Nitride (TiN) coated to provide maximum edge retention and corrosion resistance. The TiN coating can improve the average lifetime of the burr by more than three times. Kit contains 1 cylindrical 1 ball nosed cylindrical 1 ball nosed tree 1 ball nosed cone 1 pointed tree and 1 ball style burr. |
|
|
Ingersoll Rand IRT1438TiN 6 Piece 1/4 Inch Shank 3/8 Inch Head Carbide Burr Kit $138.65 Features and Benefits Titanium Nitride coated 1/4 shank 3/8 head size with various shapes Maximum operating speed of 40 000 RPM Convenient softsided case included Ingersoll Rand carbide burrs are Titanium Nitride (TiN) coated to provide maximum edge retention and corrosion resistance. The TiN coating can improve the average lifetime of the burr by more than three times. Kit includes 1 cylindrical 1 ball nosed cylindrical 1 ball nosed tree 1 ball nosed cone 1 pointed tree and 1 ball style burr. |