NEWJERSEYLANDVALUETAX.ORG

The Turning Page “the Turning Revolution”

Broaching On A CNC Lathe

One operation seen on many turned parts today is broaching. Traditionally

broaching has been regarded as a secondary operation that was typically performed

on a broaching machine with special broaching tools. Depending on the industry,

much of this type of broaching is still being done in this manner. For instance, in the

automotive sector, almost all broaching is done by large expensive automatic

broaching machines with specially designed broaching tools that can produce the

broaching at very high speed and short cycles.

Of course the fact that they are doing over a million parts per year has much to do

with their method of manufacturing the parts. But today, even in the automotive

sector, the need for JIS and reduced inventory, can justify doing parts complete on a

single piece of equipment such as the multi-axis turn/mill center. With this

equipment, a new job can be easily modified and reconfigured for revision and

design changes. This is where flexibility wins out over speed.

Types Of Broaching.

There are a few different types of broaching that can be performed on the

CNC lathe.

#1. Single slot broaching on the inside or outside diameter of a part.

#2. Multiple shapes such as hexagons or squares.

#3. Timed broaching or broached slots that require an angular position to

another feature on the part.

#4. Free position broaching that does not require an angular position to

another feature n the part.

#5. Rotary Broaching

#6. Reciprocating Broaching

The type of broaching you need to do, will determine your tooling choice and

method.

ROTARY BROACHING

One of the easiest and fastest ways to produce a broached feature is Rotary

or Wobble broaching. Rotary broaching has been around for years in the screw

machine industry and is very effective, inexpensive and fast. It is used widely in the

manufacturing of plumbing parts such as valves and fittings and in the aerospace

and medical industries. When your parts require a single broached polygon that is

not related to another angular orientation or feature on the part such as a milled

flat or drilled hole, this is often a first choice.

A leading US company in the manufacture of Rotary broaching tools and

accessories is Slater Tool Company from Clinton Township, Michigan. They can be

found on the web at www.slatertools.com where they list a full complement of rotary

tool holders, tool bits, and detailed application documentation.

A simple example of this type of rotary broaching is the producing of an I.D.

hex on the end of a part. Let’s say it is a 5/8 hex in 12L14 steel. First thing is to

determine the max hole to drill, and then the size chamfer needed to make a good

acceptable hex. This can be determined by multiplying the hex size by 1.035 to

determine the largest pilot hole to be drilled.

Hex size .625 x 1.035 = .646 Pilot Drill = .625 to .646 diameter.

To determine an acceptable chamfering size, multiply the hex size by 1.1547

Hex size .625 x 1.1547 = .721

Next is necessary to determine the feed for the type of material and broaching tool.

For the 12L14 steel, according to Slater Tool’s web site, we should broach this at

1200 RPM with a feed of .006 i.p.r.

Here is a simple program example using the rotary broach tool programmed for a

Eurotech 735SLY.

O2007(ROTARY BROACH EX)

G0G40G80

N1G54T0101M64(.633 DRILL)

G0G99G97S3620X0Z.1M3M8

M58(LOAD MONITOR ON)

G1Z-.75F.016

M59(LOAD MONITOR OFF)

G0Z1.

M1

N2G54T0202M64(3.4 90 DEG. SPOT)

G0G99G97S635X0Z.1M3M8

G1Z-.3F.03

Z-.3605F.003

G4P100(DWELL)

G0Z3.

M1

N3G54T0303M64(5/8 ROTARY BROACH)

G0G99G97S1200X0Z.1M3M8

G1Z-.65F.006

G0Z.1

G28U0M5

M30

TOTAL PER TOOL

DRILL = 4.5 SEC. CHAMFER = 5 SEC. BROACH = 8.5 SEC.

TOTAL CYCLE TIME = 18 SEC.

NOTES AND TIPS FOR ROTARY BROACHING:

Special attention should be made to how well the tool is aligned in accordance with

the Rotary broach supplier. Miss-aligned tools will result in poor tool life and

surface finish.

This application is not suited for parts where other features such as milled flats,

slots or drilled hole patterns are related to the fixed position of the polygon

produced by the Rotary broach.

Coolants or oils are required to clear chips and reduce friction for better tool life

and surface finish.

SINGLE SLOT BROACHING

When single or multiple broach slots are required they can be done on the

CNC lathe using a single broaching tool either carbide or HSS. This type of

broaching requires the CNC to have C axis for spindle positioning and a spindle

brake to hold the spindle steady and firm while broaching. Multiple passes are

required and can be programmed easiest by using sub programming and/or macro

programming. Next we will examine both styles of programming to help determine

what best suits the programmer and the part.

Note that most broached slots should have a groove broach relief or go all the

way through the part. It is not recommended to use this broaching technique into a

blind hole or one without a groove relief. Another important item is to retract the

broaching tool completely from the broached slot before feeding or rapid traversing

back to the Z start position.

EXAMPLE: .250 broached slot through .500 deep from face.

Programmed for a Eurotech 735SLY.

Sub Program.

O1444(SUB FOR .25 WIDE BROACHED SLOT)

G0X[#103](#103= .002 RADIAL DEPTH OF A PASS)

G4P100(SMALL DWELL)

G1G98Z-.5F200.(FEED BACK .5 AT 200 INCH/MIN.)

G0X.6(CLEAR THE HOLE DIAMETER)

Z.2(RETURN TO STARTING Z)

#103=[#103+#102](UPDATE #103 TO EQUAL NEXT X VALUE FOR A PASS)

M99(REWIND)

Main Program

O1234(MAIN)

XXXX

XXXX

XXXX

(SET COMMON VARIABLES FOR BROACHING)

#101=.624(BORE DIA. LESS .001 TO MAKE EVEN # OF PASSES)

#102=.004(X DEPTH OF A SINGLE PASS)

#103=#101+#102(BORE .624 + .004 = X VALUE FOR A PASS)

N5G54T0505M64M5(.250 wide broach)

M10(C AXIS ON)

G0X.624Z.2C0.M8

M70(SPINDLE BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

M11(C AXIS OFF)

G0X4.Z2.

M1

XXXXXXX

XXXXXXX

XXXXXXX

M30

NOTES AND TIPS FOR SINGLE BROACHING:

The 1st. pass is X.628 (.624+.004)

The 2nd pass is X.632 (.628+.004)

Etc.

Etc.

The 33rd pass is X.756 (.752+.004)

X.624 Start from X.756 End = .132

.132/.004=33 passes

Often a G4 (Dwell) or a greater Z start value is used before the beginning of each

pass to minimize any taper caused by Servo Lag.

Macro Variables #100 – #199 are not held in Macro Offsets when the machine is

powered off. If you want the macro values retained in the offsets when the machine

is powered off, use #500-#999

Estimated Time to complete this single broach = 12 sec.

If you need to make more of the same broach at different angular positions, your

main program would look like this……

O1234(MAIN)

XXXX

XXXX

XXXX

(SET COMMON VARIABLES FOR BROACHING)

#101=.624(BORE DIA. LESS .001 TO MAKE EVEN # OF PASSES)

#102=.004(X DEPTH OF A SINGLE PASS)

#103=#101+#102(BORE .624 + .004 = X VALUE FOR A PASS)

N5G54T0505M64M5(.250 wide broach)

M10(C AXIS ON)

G0X.624Z.2C0.M8(INDEX TO 0 DEGREES)

M70(SPINDLE BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

G0C90.(INDEX T0 90 DEGREES)

M70(BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

G0C180.(INDEX TO 180 DEGREES)

M70(SPINDLE BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

G0C270.(INDEX T0 270 DEGREES)

M70(BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

M11(C AXIS OFF)

G0X4.Z2.

M1

XXXX

XXXX

XXXX

M30

BROACHING MACRO

Another alternative is to create a Macro program for your broaching requirements.

The advantage to creating a complete Macro program is you can use the one basic format

for most of your broaching needs. Below is one example of a broach Macro program used

for the same broached part from our previous sample.

Macro Variables –

#100 = Diameter of Bore to be Broached

#101 = End of Broach Slot Diameter

#102 = Broach Feed Rate

#103 = Starting Z

#104 = Ending Z

#105 = Amount of Dwell Before Cut

#106 = Depth of Cut Per Pass

#107 = Diameter to Clear Broach Slot

PROGRAM – 735SLY

N8 G54 T0808 M64 M5 (.250 WIDE BROACH)

#100=.624

#101=.756

#102= .200

#103= .200

#104= -.500

#105= .1

#106=.004

#107=.600

M10 (C AXIS ON)

G0 X#107 Z.5 C0 M8

M70 (BRAKE ON)

G0 Z=#103 (MOVE TO Z START)

WHILE[#101GT#100]DO1

G1G98X[#100+#106]F#102 (X VALUE FOR A PASS)

G4U#105 (DWELL)

9

Z#104 (ENDING Z)

G0 X#107 (CLEAR BROACH SLOT)

Z#103 (RETURN TO Z START)

#100=[#100+#106]

END1

#100=.624 (RESET VALUE)

G0Z.5 M71 (BRAKE OFF)

M11(C AXIS OFF)

X4. Z2.

M1(OPTIONAL STOP)

NOTES AND TIPS FOR BROACHING MACRO:

The WHILE and DO statements for this Macro program are recommended over the

use of a IF and GOTO statement. An IF statement requires a GOTO that searches

for the specific BLOCK number directed by the GOTO. Because of this block

search, the processing time is greater and would add to your broaching cycle time.

Example:

Instead of the WHILE and DO, we could have used the IF and GOTO.

IF[#101GT#100]GOTO555

This statement would send the machine to BLOCK N555 and repeat again until

#101 is equal to or less than #100.

The Macro program would need to be re-written with the IF statement located at

the completion of 1 broach pass.

RECIPRICATING BROACHING

High speed reciprocating broaching is becoming more and more popular and

is the first choice for anyone doing a large amount of production broaching on their

CNC equipment. Today’s high speed broaching units are mounted onto the turret

and use the live tool drive system to send the tool forward and back at faster stroke

speeds than can be achieved by the machine’s rapid traversing.

The primary benefits to this type of broaching are ….

?? Speed (reduced cycle times)

?? Increased Tool Life

?? Less machine wear or Slide Working

At stroke speeds of up to 700 strokes per minute, these units can produce

broached slots in a third of the normal single stroke fixed broach with better tool

life. Since the live tool drive system is driving the tool to reciprocate, the machine

slide stays fixed, providing added rigidity and less wear and tear on the machine as

a whole.

About the Author

Larry Greenawalt from EurotechElite was an
experienced engineer who was in charged of the Eurotech’s engineering department.

Brushed and Polished Grooved Tungsten Carbide Ring with Beveled Edge (7.0mm)

LAST 50 NEW TOP NOTCH STYLE CARBIDE INSERTS GROOVING $67.49

Freud 99-036 Adjustable Tongue and Groove Router Bit Set, 1/2-Inch Shank $62.52 An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Trim carpenters, remodelers, and woodworking enthusiasts can now mill molding of almost any size, shape and configuration to add beautiful detail to …

5804 CARBIDE-TIP 2 FLUTE VERTICAL OGEE STYLE RAISED PANEL ROUTER BIT 1 DIA X 1-1/2 CUT LENGTH $62.21 WHITESIDE MACHINE 5804 CARBIDE-TIP 2 FLUTE VERTICAL OGEE STYLE RAISED PANEL ROUTER BIT 1 DIA X 1-1/2″ CUT LENGTH X 1/2″ SHANK X 3″ OAL- PANEL RUNS VERTICALLY…

6002A CARBIDE-TIP OGEE STYLE- STILE SIDE CUTTER ONLY 1-5/8 DIA X 1 CL X 1/4 REVEAL X 1/2 SH $60.48 WHITESIDE MACHINE 6002A CARBIDE-TIP OGEE STYLE- STILE SIDE CUTTER ONLY 1-5/8 DIA X 1″ CL X 1/4″ REVEAL X 1/2″ SHANK – FOR 5/8 TO 7/8″ MATERIAL…

Carbide-Tipped V-Grooving Router Bits $23.81 Carbide-Tipped V-Grooving Router Bits

Bosch 85284 V-Grooving And Scorer, S.C. $9.19 Bosch 85284 V-Grooving And Scorer, S.C. Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch 85284 V-Grooving And Scorer, S.C. Features: Solid carbide v-groove and scoring bit is excellent for door-front grooving and scoring panel design in wood surfaces. Produces simulated paneling for walls, doors and furniture Solid Carbide V-groove & Scoring Bit Item # 85284 A. Overall Diameter 1/4? B. Cutting Edge Length 27/64? C. Shank Diameter 1/4? D. Shank Length 1-1/16? E. Overall Length 1-31/64?Bevel 41

Grooving Baby $10 Grooving Baby

Grooving Puppy $10 Grooving Puppy

Olive Green Grooving Skirt $15 Occasions: Casual Silhouette: Fishtail Style: Geometric, Color-block Fabric: Chiffon, Others Season: Summer Color: Black, Green Length: Long Price: Below US 20 Look After Me: Hand wash, Wash seperately, Wash inside out, Dry flat Size: M​

Keep On Grooving $6 Keep On Grooving – Damian Marley

Bosch 85220M V Grooving Bit 1-1/4 Cut, 1/4 Shk., C.T. $24.12 Bosch 85220M V Grooving Bit 1-1/4″ Cut, 1/4″ Shk., C.T. Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch 85220M V Grooving Bit 1-1/4″ Cut, 1/4″ Shk., C.T. Features: Carbide tipped v-groove bits and scoring bits are micrograin bits ideal for door-front grooving, lettering and sign work. Feature shear angle cutter geometry for smooth, efficient cutting Carbide Tipped V-groove & Scoring Bits Item # 85220M A. Overall Diameter 1-1/4 Inch B. Cutting Edge Length 7/8 Inch C. Shank Diameter 1/4 Inch D. Shank Length 1-7/32″ E. Overall Length 2-7/64 Inch F. Bevel Cut 7/8 Inch (45°)

Bosch 85219M V Grooving Bit 1/2 Cut, 1/4 Shk., C.T. $14.68 Bosch 85219M V Grooving Bit 1/2″ Cut, 1/4″ Shk., C.T. Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch 85219M V Grooving Bit 1/2″ Cut, 1/4″ Shk., C.T. Features: Carbide tipped v-groove bits and scoring bits are micrograin bits ideal for door-front grooving, lettering and sign work. Feature shear angle cutter geometry for smooth, efficient cutting Carbide Tipped V-groove & Scoring Bits Item # 85219M A. Overall Diameter 9/16 Inch B. Cutting Edge Length 3/4 Inch C. Shank Diameter 1/4 Inch D. Shank Length 1″ E. Overall Length 1-3/4 Inch F. Bevel Cut 3/8 Inch (45°)

Alfred 6832446 Grooving for Heaven Volume 3 The Art of Groove Music Book $52.38 Alfred Music Publishing is the world s largest educational music publisher. Alfred produces educational’ reference’ pop’ and performance materials for teachers’ students’ professionals’ and hobbyists spanning every musical instrument’ style’ and difficulty level. As part of the Grooving for Heaven series’ The Art of Groove is an indepth and engaging exploration of the relationship between the bass and drums in a contemporary ensemble. Bassist Norm Stockton’ with insight and consummate grooving from drummer David Owens’ demonstrates and clarifies a multitude of concepts’ exercises’ and groove considerations. This DVD is an indispensable resource for bassists and drummers seeking maximum rhythm section effectiveness.

Barney – Moving And Grooving $4.99 Barney – Moving And Grooving

Freud 20-102 3/8-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank $20.59 Freud 20-102 3/8-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank Application: Engraving, decorative accents and signs Freud 20-102 3/8-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank Features: Ideal for making signs and adding decorative accents to furniture and plaques, Freud’s “V” grooving bits are designed to cut deep or shallow “V” grooves Cuts all composition materials, plywoods, hardwoods, and softwoods Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Ideal for making signs and adding decorative accents to furniture and plaques Designed to cut deep or shallow V grooves Cuts all composition materials. plywoods, hardwoods and softwoods Use on CNC and other automatic routers as well as hand held and table mounted portable routers 90 angle Freud 20-102 3/8-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank Specifications: Overall Dia.(D): 3/8″ Carbide Height(h): 5/16″ Large Radius(R): 90 Shank Dia.(A): 1/4″ Overall Length(H): 1-3/4″

Freud 20-104 1/2-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank $23.91 Freud 20-104 1/2-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank Application: Engraving, decorative accents and signs Freud 20-104 1/2-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank Features: Ideal for making signs and adding decorative accents to furniture and plaques, Freud’s “V” grooving bits are designed to cut deep or shallow “V” grooves Cuts all composition materials, plywoods, hardwoods, and softwoods Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Ideal for making signs and adding decorative accents to furniture and plaques Designed to cut deep or shallow V grooves Cuts all composition materials. plywoods, hardwoods and softwoods Use on CNC and other automatic routers as well as hand held and table mounted portable routers 90 angle Freud 20-104 1/2-Inch Diameter 90-Degree V-Grooving Router Bit with 1/4-Inch Shank Specifications: Overall Dia.(D): 1/2″ Carbide Height(h): 7/16″ Large Radius(R): 90 Shank Dia.(A): 1/4″ Overall Length(H): 1-3/4″

Freud 20-108 3/4-Inch Diameter 90-Degree V-Grooving Router Bit with 1/2-Inch Shank $27.55 Freud 20-108 3/4-Inch Diameter 90-Degree V-Grooving Router Bit with 1/2-Inch Shank Application: Engraving, decorative accents and signs Freud 20-108 3/4-Inch Diameter 90-Degree V-Grooving Router Bit with 1/2-Inch Shank Features: Ideal for making signs and adding decorative accents to furniture and plaques, Freud’s “V” grooving bits are designed to cut deep or shallow “V” grooves Cuts all composition materials, plywoods, hardwoods, and softwoods Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Ideal for making signs and adding decorative accents to furniture and plaques Designed to cut deep or shallow V grooves Cuts all composition materials. plywoods, hardwoods and softwoods Use on CNC and other automatic routers as well as hand held and table mounted portable routers 90 angle Freud 20-108 3/4-Inch Diameter 90-Degree V-Grooving Router Bit with 1/2-Inch Shank Specifications: Overall Dia.(D): 3/4″ Carbide Height(h): 1/2″ Large Radius(R): 90 Shank Dia.(A): 1/2″ Overall Length(H): 2-1/4″

Moving and Grooving by Boyd, Bentley Edition , 0 $15.49 Moving and Grooving. Boyd, Bentley

Rothenberger 477 Grooving and Beveling Die Heads & Tools- Grooving & Cutting Bit $262.9 Rothenberger 477 Grooving and Beveling Die Heads & Tools- Grooving & Cutting Bit Rothenberger 477 Grooving and Beveling Die Heads & Tools- Grooving & Cutting Bit Features: Sizes: 3/4″ – 2″, 22A, 33A, 44A

Alfred 6832445 Grooving for Heaven Volume 2 The Bassist amp; Contemporary Worship Music Book $52.38 Alfred Music Publishing is the world s largest educational music publisher. Alfred produces educational’ reference’ pop’ and performance materials for teachers’ students’ professionals’ and hobbyists spanning every musical instrument’ style’ and difficulty level. From the technical and musical’ to the conceptual and spiritual’ Grooving for Heaven Volume 2 builds upon the fundamentals to help the contemporary worship bassist reach the next level of playing. This engaging’ oneonone clinic teaches what to play’ what not to play’ and the importance of subtlety.

Alfred 6832444 Grooving for Heaven Volume 1 The Bassist amp; Contemporary Worship Music Book $52.38 Alfred Music Publishing is the world s largest educational music publisher. Alfred produces educational’ reference’ pop’ and performance materials for teachers’ students’ professionals’ and hobbyists spanning every musical instrument’ style’ and difficulty level. Grooving for Heaven’ Vol. 1 is a oneonone clinic for the bass player seeking to establish a solid foundation’ with a focus on the unique factors (musical and otherwise) encountered in the contemporary worship environment. Norm’s casual yet intensive approach will help bassists of every level learn to play more effectively. Topics covered include warmups for the impatient’ proper hand and bass positioning’ fingerboard familiarity’ pregroove studies’ diverse musical styles’ and the heart and ministry.

Grooving it on a dirt bike Sports Dark T-Shirt by CafePress $26 Don’t waste time deciding on which shirt to put on each morning. This dark shirt t-shirt will never go out of style and hides stains better too. This high-quality t-shirt is pre-shrunk and 100% cotton, which makes it both comfortable and durable. Sports Dark T-Shirt Tee, TShirt, Shirt Don’t waste time deciding on which shirt to put on each morning. This dark shirt t-shirt will never go out of style and hides stains better too. This high-quality t-shirt is pre-shrunk and 100% cotton, which makes it both comfortable and durable.

AAB Style RTS28 Gorgeous Tungston Carbide Ring $36.45 Gorgeous Tungston Carbide Ring. The width of this ring is 7mm. High quality components. Satisfaction ensured.