NEWJERSEYLANDVALUETAX.ORG

Stainless Steel Sheets – A Brief Overview

In today’s times, there are hardly any construction or manufacturing project which can be completed without the use of stainless steel sheets. The reason is quite simple, stainless steel sheets have high tensile strength, better durability and delivers a great finish. The best part about using them is low maintenance which has positioned it as a superior alternative to traditional steel.

Buyers usually keep three main factors in mind while deciding to buy stainless steel sheets. The first and foremost is – grade, then size and finally the overall finish.

The three most common stainless steel grades available are 304, 316, and 410. Experts say that Grade 304 is the most common of the above mentioned grades. It offers good corrosion resistance while maintaining its core quality and durability intact. It can also be noted that grade 303 is not available in the sheet form.

The thickness of stainless steel sheets is normally between 0.4mm and 2.5mm. In case someone has a requirement of any proportion less than this, then, they are probably referring to a foil, on the other hand any requirement of more than 3mm and above qualifies for a plate.

As far as the finish is concerned, the sheet produced is first rolled into the required size and thickness and then made to pass through highly polished rollers before a final finish is delivered.

The finishing process involved is somewhat complicated and there are dozens of patterns available in the market.

The most common finish is brushed finish which delivers a pattern of very fine lines made up of small scratches appearing in a unidirectional way. Another one is satin finish where in scratch-brushing is used to produce a soft sheen. Last but not the least, the mirror polishing gives the sheet a highly polished reflective surface.

Overall the stainless steel sheets are in great demand due to rapid western style urbanization.

Many manufacturers prefer these sheets over other material as they consider it as a perfect fit for anything from resurfacing counter tops, or appliances, or for a complete makeover of a structure.

As competition is getting getting more intense, most of the stainless steel sheets suppliers and manufactures are coming online in an effort to trade through B2b portals. Online marketing gives them better exposure especially to the overseas market at a fraction of a cost. Overall the stainless steel sheets suppliers are all set for a better performance in the next financial year.

PS: If you are a Stainless Steel Sheets supplier, get your online catalog today and make profits by tapping the business queries being generated across the globe on the web 24/7.

About the Author

I am a B2B Industry analyst working for a B2B Portal

Stainless Steel Pipe Purging for Food Grade Pipe Welding codes

Milwaukee’s Best Steel Beer Can…Miller Brewing..1970′s..Grade 1- $1.50

Pocono Mountains Beer – Summer Can 1978…Steel Can…Air Sealed…Grade 1 $4.00

Fox Deluxe Beer Can…Steel…Cold Springs Brewery – MN…Grade 1 $2.00

Bub’s Beer – Steel – Walter Brewing – Eau Claire, WI “STRONG” on bottom..Grade 1 $2.00

Fox Head 400 Real Draft..Steel – Style 2…Weidemann Div of Heileman…Grade 1 $3.00

West Virginia Beer – Steel – Little Switzerland Brew – Huntington, WV…Grade 1 $9.00

Burger Beer..Pull Tab..Steel…Hudepohl – Cincinnati, OH..Bottom Opened..Grade 1 $1.50

Ballantine Pull Tab…Tall,Thin Steel..Falstaff -Cranston..Florida Issue.Grade 1 $4.00

Pfeiffer Quick Chill..Steel..Associated Brewery Evansville, South Bend..Grade 2 $1.00

Dubuque Star Beer..Steel…Jos Pickett Brewery – Dubuque, IA…Grade 1 $3.00

Duke Beer..”Krausening”..12 Ounce..Rolled Steel..Top Opened…Grade 1 $1.00

Milwaukee’s Best Steel Beer Can…Miller Brewing..1970′s..Grade 1-/2 $1.50

Pocono Mountains Beer – Fall Can 1978…Steel Can…Air Sealed…Grade 1 $4.00

Special Export Beer Can…Steel…Heileman Brewing – Lacrosse, WI…Grade 1 $2.00

Pocono Mountains Beer – Winter Can 1978.Skiing..Steel Can…Air Sealed..Grade 1 $4.00

American Beer Pull Tab..Steel…Pittsburgh Brewing…Bottom Opened…Grade 1 $1.50

Schmidt’s Bavarian Beer…12 Ounce..Rolled Steel..Top Opened…Grade 1 $1.00

Pabst Blue Ribbon Beer Can “No Opener Needed” Steel Can..1970′s..Grade 1- $3.25

Milwaukee’s Best Steel Beer Can…Miller Brewing..1970′s..Grade 1 $1.50

Potosi Beer..Steel..Bottom Opened – Potosi, WI…Grade 1 $3.00

Schell Xmas Brew…Steel Can…August Schell Brewery – New Ulm, MN…Grade 1 $1.50

A & P Tudor Premium Beer – Steel – Cumberland Brewery, MD.. Top Opened…Grade 1 $4.50

Buckeye Beer – Steel – Buckeye Div of Meister Brau – Toledo, OH…Grade 1 $5.00

Imperial Pilsener Beer Can – Steel…Hofbrau Brewery – Allentown, PA…Grade 1 $1.50

Oertels 92..Steel .Oertel Div of Heileman – Newport, KY…Grade 1 $2.00

National Premium – Steel – National Brewing – Baltimore, MD, Detroit ..Grade 1- $3.00

Bohemian Club Beer Can – Steel…Huber Brewing – Monroe, WI…Grade 1 $1.50

Old Shay Golden Cream Ale – Steel – Fort Pitt Brewing – Smithton, PA…Grade 1 $3.00

Schell Bock…Steel Can…1979..August Schell Brewery – New Ulm, MN…Grade 1 $2.00

Ortlieb’s Beer Can – Steel…Ortlieb Brewery – Philadelphia, PA…Grade 1 $1.50

Fox Head 400 Real Draft..Steel…Weidemann Div of Heileman…Grade 1 $3.00

Falstaff Pull Tab…Tall,Thin Steel..Falstaff – Cranston…Top Opened…Grade 1- $2.00

Gablinger’s..Steel…Forrest Brewery – New York, NY, Orange, NJ…Grade 1 $3.00

Regal Brau Pull Tab…Steel…Jos.Huber – Monroe, WI…Bottom Opened…Grade 1 $2.00

Brew II Pull Tab…Steel…Horlacher – Allentown, PA…Bottom Opened…Grade 1 $1.50

Huber Beer Can – Steel…Jos. Huber Brewery – Monroe, WI…Grade 1 $1.50

BCCA 6th Collectors Convention Can 1976..12 Ounce..Air Sealed…Steel..Grade 1 $25.00

Molson Stock Ale Beer Can…1970′s Punch Top..Steel..Bottom Opened….Grade 1 $1.50

Billy Beer…Steel Can..”STRONG” on Bottom…Cold Springs Brewery – MN…Grade 1 $4.00

St. Patricks Day 1979..Steel Can…August Schell Brewery – New Ulm, MN…Grade 1 $3.00

Railfan Beer..Steel…General Electric Train – Minnesota Line…Grade 1 $3.00

P.O.C. Can – Steel..Pilsener – Cleveland, OH, Norristown, Philadellphia..Grade 2 $1.00

Maverick Beer – Beer Cans Monthly Can Convention 1980..Steel..Grade 1 $5.00

Andeker Beer Can…Steel…Pabst Brewing – Milwaukee, WI…Grade 1- $1.00

Schlitz Malt Liquor – 8 Ounce…Steel…Mid – 1970′s…Grade 1 $4.00

P.O.C..Rolled Steel..Pilsener Brewing – Cleveland, OH, Philadelphia,PA..Grade 1- $1.00

Old Milwaukee Beer Can….Steel…1975…top opened…Grade 1 $1.00

Alps Brau Beer Can..Steel..Old Crown Brewing – Fort Wayne, IN…Grade 1 $3.00

Blatz Beer Can..Steel…Blatz Div of Heileman – Lacrosse, WI, …Grade 1 $2.00

Lady Black Cobra Surgical Grade Stainless Steel Magnetic Bracelet Health Therapy $18.90

Zodiac Malt Liquor..1970′s Steel Pull Tab…Peter Hand – Chicago, IL….Grade 1 $1.50

Wisconsin Club I..1970′s Steel Pull Tab…Huber Brewing – Monroe, WI…Grade 1 $2.00

Wisconsin Club II..1970′s Steel Pull Tab…Huber Brewing – Monroe, WI…Grade 1 $2.00

Wunderbrau Beer..1970′s Steel Pull Tab…Erie Brewing – Erie, PA…Grade 1 $2.50

Steinhaus Beer..12 oz…Steel Can..August Schell Brewery – New Ulm, MN…Grade 1 $1.50

Royal Hibernia Irish Ballad Beer..12 ounce…Steel Can…Grade 1 $4.00

SOG High-grade durable brushed Folding Line Lock Steel Saber Knife K56 $2.89

12 15/16″ Utility Grade Chrome Steel Balls (1-1/2 lbs) $18.00

Rhinelander..1970′s Steel Pull Tab…Huber Brewing – Monroe, WI…Grade 1 $2.00

(2) Fitgers Beer S.S. Duluth Steel Cans..Schell Brewery – New Ulm, MN…Grade 1 $6.50

BRAND NEW MILITARY GRADE 300 DESST STEEL TOE HOT WEATHER BOOTS 10.5W $30.00

Naragansett Cream Ale..1970′s Steel Pull Tab…Falstaff – Cranston, RI…Grade 1 $1.50

# Commercial Grade Stainless Steel Pressure Cooker 5L # $50.38

# Commercial Grade Stainless Steel Pressure Cooker 8L# $98.88

SOG High-grade durable brushed Folding Line Lock Steel Saber Knife K56 $2.89

69 5/8″ Utility Grade Chrome Steel Balls (2-1/2 lbs) $23.00

0.009″ GRADE 430 STAINLESS STEEL WIRE $4.99

Aquverse® 5H Commercial-Grade Stainless-steel Top-load Water Dispensor $287.97

40 1/2″ Utility Grade Chrome Steel Balls (12 oz) $7.20

135 1/2″ Utility Grade Chrome Steel Balls (2-1/2 lbs) $18.00

202 1/2″ Utility Grade Chrome Steel Balls (3-3/4 lbs) $25.20

538 1/2″ Utility Grade Chrome Steel Balls (10 lbs) $49.50

969 1/2″ Utility Grade Chrome Steel Balls (18 lbs) $81.90

377 1/2″ Utility Grade Chrome Steel Balls (7 lbs) $37.80

50 NEW CNMG 643 GRADE C5 STEEL CARBIDE INSERTS N974S $149.99

ROLL OF 50 STEEL CENTS 1943 WHEAT PENNIES P D S CIRCULATED COINS GOOD GRADE $14.95

6pc EASY OUT for BOLT, SCREW, STUD, PIPE 1/8 – 3/4″ HI GRADE STEEL EXTRACTOR SET $6.69

GRADE 321 STAINLESS STEEL SHEET .0235″ X 48″ X 25″ AMS 5510 $40.00

100 NEW CNMG 434 GRADE C5 STEEL CARBIDE INSERTS N105S $129.99

100 NEW CNMA 433 GRADE C5 STEEL CARBIDE INSERTS N380S $99.99

250 Stainless Steel Spring Cord End Connectors 10x4mm Coiled 304 Grade $14.99

Pallet racking racks HEAVY DUTY steel industrial grade beams uprights rails fram $96.00

3/8-16 NC Grade 8 Steel Hex Nuts Zinc Plated 50 Pack $7.95

SOG High-grade durable brushed Folding Line Lock Steel Saber Knife K56 $2.89

Aquverse® 5H Commercial-Grade Stainless-steel Top-load Water Dispensor $287.97

Buyers Products Weld-On Grab Hook-5/16in Grade 43 steel 3900lb Limit B2408W $5.99

2 PAIRS STAINLESS STEEL DUTY GRADE HANDCUFFS,2 STANDARD KEYS/ CHAIN LINK NEW $20.00

Weber Style New Professional-Grade Stainless-Steel 3-Piece Barbeque Tool Set $50.28

GOURMET STAINLESS STEEL FRUIT BALLER PROFESSIONAL GRADE $9.89

Tiger Tail Beading Wire .38mm Stainless Steel Grade 304 – 7 Thread – 90M Length $3.99

250 Stainless Steel Spring Cord End Connectors 10x4mm Coiled 304 Grade $14.99

Aquverse® 5H Commercial-Grade Stainless-steel Top-load Water Dispensor $287.97

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $6.29

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $2.02

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $14.19

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $2.81

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $4.71

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $9.45

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $22.09

No4 (2.9) PAN HEAD SELF TAPPING SCREWS A4 MARINE GRADE STAINLESS STEEL SCREW $6.29

Spikes 316L Surgical Grade Stainless Steel Ring $15.66 Spikes 316L Surgical Grade Stainless Steel Ring Durable 316L surgical grade stainless steel ring with profound style. This surgical stainless steel ring features a polished classic look. Stainless steel men’s ring available in sizes 9, 10, 11, 12 and 13. Band measures 8mm wide. SPIKES stainless steel jewelry is a trendsetting 316L jewelry collection created for today’s stylish men and women who want leading-edge jewelry designs. Specifications: 316L Surgical Grade Stainless Steel, Available in sizes 9, 10, 11, 12 and 13

S.R. Smith Commercial-Grade Stainless Steel Pool Ladder Bolt Kit $24.99 S.R. Smith Commercial-Grade Stainless Steel Pool Ladder Bolt Kit

S.R. Smith Commercial-Grade Stainless Steel Pool Ladder Escutcheon Plate $11.99 S.R. Smith Commercial-Grade Stainless Steel Pool Ladder Escutcheon Plate

S.R. Smith Commercial-Grade Stainless Steel Pool Ladder Replacement Step $34.99 S.R. Smith Commercial-Grade Stainless Steel Pool Ladder Replacement Step

Aroma AFP-1600S Electric 18/10 Grade Stainless Steel Skillet $89.99 Aroma AFP-1600S Electric 18/10 Grade Stainless Steel Skillet

Red Devil 3332 Multi-Grade Steel Wool $4.32 Red Devil 3332 Multi-Grade Steel Wool Contains two pads each of grades 0, 1 and 3. Red Devil 3332 Multi-Grade Steel Wool Features: 6 Pack Assorted steel wood 2 pads of 3 grades each Includes grades fine, medium and coarse 6 per card

Pro Grade Stainless Steel Dura Scissors $8.79 Pro Grade Stainless Steel Dura Scissors . Better than regular scissors for tough shearing tasks Quality mini-shears cut through almost anything even a penny! Great for odd jobs at home or on the boat. Made of rust-resistant stainless steel Lifetime warranty

Pro Grade Stainless Steel Shears 7 $10.49 Pro Grade Stainless Steel Shears 7″ . Cut plastic, cardboard, leather, fabric, wire and more with these stainless shears made of non-corroding stainless steel. Shears include wire cutter for up to AWG 12 wire. Non-slip grips with thumb swivel lock. Lifetime warranty.

High Grade Adjustable Stainless Steel Harmonica Holder $21.99 SpecificationMode: Folding Material: Stainless Steel

Size 13 -SPIKES 316L Surgical Grade Lined Stainless Steel Ring $15.37 Size 13 -SPIKES 316L Surgical Grade Lined Stainless Steel Ring Size 13 lined surgical grade stainless steel ring. An alluring 316L stainless steel ring with exquisite style. This surgical grade stainless steel ring features lined detail. Band measures 8mm wide. SPIKES stainless steel jewelry is a trendsetting 316L jewelry collection created for today’s stylish men and women who want leading-edge jewelry designs. Specifications: Size 13, 316L Surgical Grade Stainless Steel

Size 9 -Spikes 316L Surgical Grade Lined Stainless Steel Ring $15.37 Size 9 -Spikes 316L Surgical Grade Lined Stainless Steel Ring Size 9 lined surgical grade stainless steel ring. An alluring 316L stainless steel ring with exquisite style. This surgical grade stainless steel ring features lined detail. Band measures 8mm wide. SPIKES stainless steel jewelry is a trendsetting 316L jewelry collection created for today’s stylish men and women who want leading-edge jewelry designs. Specifications: Size 9, 316L Surgical Grade Stainless Steel

Steel $70 By Randall D. Standridge. For concert band. Grade 3. Score and set of parts. Duration 3 minutes 29 seconds. Published by Grand Mesa Music

Ergocentric – Steel Industrial Grade Small Adjustable Footrest $189 This footrest is made for hard working environments. Constructed from industrial grade, all steel parts, the small adjustable footrest features a non-slip rubber footplate and a tough, abrasion resistant polyurethane coating. Large non-slip rubber feet hold the footrest in place while not damaging the floor.Adjusts vertically from 4″ – 16″ in increments of 2″, with a platform measuring 12″ deep by 12″ wide.

Ergocentric – Steel Industrial Grade Large Adjustable Footrest $199 This footrest is made for hard working environments. Constructed from industrial grade, all steel parts, the large adjustable footrest features a non-slip rubber footplate and a tough, abrasion resistant polyurethane coating. Large non-slip rubber feet hold the footrest in place while not damaging the floor.Adjusts vertically from 4″ – 16″ in increments of 2″, with a platform measuring 12″ deep by 20″ wide.

EDSAL Commercial-Grade Steel Shelving – Gray (5161727) $217 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Tan (5161023) $182 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5161027) $182 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Tan (5162323) $256 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Tan (5155723) $150 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5155727) $150 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5155827) $182 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Tan (5155923) $222 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Tan (5110123) $104 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5110127) $104 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5111427) $119 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5111527) $133 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Tan (5111623) $160 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5101627) $136 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5162327) $256 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.

EDSAL Commercial-Grade Steel Shelving – Gray (5111627) $160 Store light parts, office supplies, or equipment on this practical EDSAL Commercial-Grade Steel Shelving. Rigid, box-formed shelves adjust on 1″ centers without disturbing adjoining units. Each 22-gauge shelf can support up to 400 lbs (shelf capacity is based on evenly distributed loads). Baked enamel finish resists rust. Uprights and side braces are 16-gauge steel, back braces are 13-gauge; enclosed back and end panels are 24-gauge steel. Shelves attach to posts via Kwik-Klips. Units include 5–8 shelves, four corner posts, back and side braces, back and side panels (on closed-type units), and all hardware. Ships unassembled for freight savings. Order enough units to meet your storage needs! Ask for special quotations on larger quantities.