NEWJERSEYLANDVALUETAX.ORG

Sliding Glass Door Repairs You Can Do Yourself

Sliding glass doors are very common in U.S. homes, usually as entry doors to a backyard, deck, or patio area.  If you are like many homeowners who live in older homes, you may find that your sliding glass door is in need of some basic repairs.  In this article, we’ll address some of the most common problems afflicting older sliding glass doors, as well as some simple and low cost repairs you can do yourself.

Houses will often settle with age and become slightly out of square.  This is a natural result of changes in the soil around your home’s foundation.  However, when a home settles, it sometimes results in doors that don’t open and close well, including sliding glass doors.  If your sliding glass door no longer slides properly, you should inspect it to see if it has fallen out of square.  Look at the top and bottom of the door.  If it’s out of square, you may notice a slight crack at the top or bottom, especially when you are attempting to slide the door back and forth.

The first and most simple solution to an out-of-square door is to adjust the door’s rolling wheels.  With most sliding doors, there are two roller wheel assemblies under the door, allowing the door to move back and forth easily in its track.  To adjust these wheels, look for small holes in the face of the lower frame.  Sometimes these holes will be plugged with small caps that are easily removed.  You can insert a screwdriver in these holes to turn the adjustment screws, moving the wheels higher or lower, as needed.

If this doesn’t correct the problem, another option is to shim the door.  This is slightly more work, because it involves removing the interior trim around the door.  Once the moldings are removed, you’ll see that the patio door frame was installed and shimmed into the opening.  You’ll probably also see that it is no longer perfectly in square.  You can take out or loosen the screws that secure the door frame in place, and then re-square the door, shimming it out as needed.  Once the door frame is square again, screw it back in place, and then you’ll be ready to reattach the trim molding again.  Re-squaring your door will not only make it operate more smoothly, but it will also make it more energy efficient, as this will eliminate small cracks that let in cold or hot air from outdoors.

Another common problem afflicting old patio doors is that the handle and latch mechanism may be worn or even broken.  A sliding glass door handle is very easy to replace, once you find the correct hardware.  If you cannot find the correct replacement handle at your local hardware store, look online or in specialty catalogs.  You may have to remove the old handle on your door and take some critical measurements to determine the correct replacement parts.  The important areas to measure are door thickness, the distance between holes drilled in the door, and the style of strike in the door jamb.  Replacing your old worn out hardware might also give you an opportunity to upgrade of a higher security handle and lock, if that is of importance to you and your family.

Lastly, older sliding glass doors can receive a much needed face-lift with some simple cleaning.  If your door’s frame is looking dull and worn, first get out the garden hose and wash it down.  Use a soft bristled brush and some lukewarm soapy water to remove the dirt from the exterior frame.  On the inside, the door frame can be wiped down with a damp rag, and the roller track can be vacuumed out and then wiped as well, which will also improve roller function.  Finally, if you wish, wax the frame with a good grade of automotive wax to bring back the door’s original luster.

Keeping your sliding glass door in good condition is one important part of maintaining your home.  And since repairing a patio door is far less expensive than buying a replacement, it only makes good sense to maintain your door for as long as possible.  With some basic preventative maintenance and occasional repair work, anyone can keep their sliding glass door in good condition for many years.

About the Author

For more information on patio door repairs, and for free shipping on all replacement sliding glass door handles, visit Home Products ‘N’ More at http://www.homeproductsnmore.com/Patio_Door_Locks_s/132.htm

Straight-line Glass Bevelling in Canada at Clearview Specialty Glass

Inserts $3.26 Inserts

Smittybilt Grille Inserts 869000 $99.99 Billet inserts are machined from billet aluminum and polished to a high luster. Chrome inserts add great styling and appearance. Durable and corrosion resistant, easy to install and no drilling required.

Grille Inserts by Rugged Ridge $58.99 1987-95 YJ Wrangler;Black plastic;Snaps into standard grille with no drilling

Smittybilt Grille Inserts $139.99 1997-06 TJ Wrangler, Rubicon and Unlimited;Chrome billet aluminum;Snaps into standard grille with no drilling

Jeep Grille Inserts; Smittybilt Jeep Grille Inserts; Jeep TJ Wrangler $139.99 1997-06 Jeep TJ Wrangler, Rubicon and Unlimited;Chrome billet aluminum;Snaps into standard grille with no drilling JEEP WRANGLER (97-06LJ) WRANGLER (97-06TJ) 65TH ANNIVERSARY EDITION RUBICON SAHARA SE SPORT UNLIMITED UNLIMITED RUBICON X 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2.4L Power-Tech (148) 2.5L (150) 4L Power Tech (242) GAS Jeep Grille Inserts; Smittybilt Jeep Grille Inserts; Jeep TJ Wrangler

Jeep Wrangler Chrome Trim Grille Inserts (1987-1995) $68.95 Enhance the look of your Jeep with the Rugged Ridge chrome grille inserts. Each grille insert is UV treated and corrosion resistant. They are easy to install, with no drilling required. They just click right in! They add awesome styling to any Wrangler!     Features: Durable Corrosion resistant UV treated Easy to install No drilling required

Jeep Wrangler Black Trim Grille Inserts (1987-1995) $56.95 Enhance the look of your Jeep with the Rugged Ridge black grille inserts. Each grille insert is UV treated and corrosion resistant. They are easy to install, with no drilling required. They just click right in! They add awesome styling to any Wrangler!     Features: Durable Corrosion resistant UV treated Easy to install No drilling required

Grille Inserts by Rugged Ridge for Jeep $69.99 1987-95 Jeep YJ Wrangler;Chrome;Installs without drilling or tools JEEP WRANGLER (87-95YJ) ISLANDER LAREDO RENEGADE RIO GRANDE S SAHARA SE SPORT 1987 1988 1989 1990 1991 1992 1993 1994 1995 2.5L (150) 4.2L (258) 4L Power Tech (242) GAS Grille Inserts by Rugged Ridge for Jeep

Specialty Rack by Garvin Industries for Jeep $795.99 2004-06 Jeep LJ Wrangler Unlimited;Black powder coat;Soft top only;54 in. x 52 in. x 4 in.;Drilling required JEEP WRANGLER (97-06LJ) UNLIMITED UNLIMITED RUBICON 2004 2005 2006 4L Power Tech (242) GAS Specialty Rack by Garvin Industries for Jeep

Specialty Rack by Garvin Industries $795.99 2007-11 JK Wrangler Unlimited;4-door models;With freedom top;Black powder coat;54 in. x 60 in. x 4 in. ;Drilling required

Bully Cut-Out Grilles – Inserts (Skull) [04-Up Avalanche w/o Body Cladding] $55.7 Mirror polished T-304 stainless steel contructed grille inserts. Mounts over existing factory grille with no drilling required.