NEWJERSEYLANDVALUETAX.ORG

Which substance contains individual molecules in the solid?

Graphite, iodine, mercury, silicon carbide.

I2

ZURNOV JR YATES Tungsten Carbide Ring

10x 0.2mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

10x 0.4mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

10x 0.5mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

10x 0.7mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

ISCAR 12mm 4 FLUTE SOLID CARBIDE ROUGHER COATED ENDMILL (ECP) (#305) $42.50

ISCAR 12mm 4 FLUTE SOLID CARBIDE ENDMILL COATED (EC) (#334) $42.90

3MM X 100MM 3 FLUTE Al & Cu MACHINING MICROGRAIN SOLID CARBIDE ENDMILL $15.30

8MM SOLID CARBIDE REAMER $23.48

0.2MM X 10 DEGREE HRC40 SOLID CARBIDE FLAT BOTTOM ENGRAVING BIT $5.34

VINTAGE SOLID CARBIDE BITS BY CUTWELL – RANSOM & RANDOLPH – NEVER USED – #557 $19.00

VINTAGE SOLID CARBIDE BITS – MADE IN SWITZERLAND – BY MILTEX – BATCH #336 $19.00

6mm 3 Flutes Solid Carbide Endmill (#338) $12.90

Scientific Helical Thread Mill SOLID CARBIDE Tialn Coated .62 X 1 3/8, 4 FL 5/8 $99.99

NEW MONSTER TOOL SOLID CARBIDE 6-FLUTE COUNTERSINK SET 82° USA 1/4″,1/2″,3/4″,1″ $209.99

Lot New 10 Pcs Solid Carbide Mills 4Fl End mill Cutting Dia 4mm Flat Endmills $59.90

SUMITOMO SOLID CARBIDE 3/4″ WITH 3/4 STRAIGHT SHANK $125.00

HI-ROC1/2″CARBIDE TIPPED DIE DRILL USA $35.00

SOLID CARBIDE 9-64 SPADE DRILL $15.00

solid carbide step drill .435 x .787 bridgeport cnc $35.00

1 BRAND NEW SANDVIK 5/16 SOLID CARBIDE BORE BAR $39.99

solid carbide step drill .435 x .787 cnc mill shop new $40.00

ISCAR 10mm 4 FLUTE SOLID CARBIDE ENDMILL COATED (EC) (#340) $32.90

2 BRAND NEW .156 SCB SOLID CARBIDE BORE BAR $15.99

1/2″ Solid Carbide Coolant Reamer MC-00452T SCM09-05 $55.00

SUMITOMO 12.5MM Solid Carbide Drills, 2F , Tialn coated. $54.00

2 BRAND NEW SCB-.187 SOLID CARBIDE BORE BAR $15.99

SOLID CARBIDE DRILL 3/8 (.375) HI TUFF UNCOATED USA $34.00

NEW – 20 — # 65 (0.0350″) PCB carbide drill bits $25.00

NEW – Forty ’4.35MM ‘ (0.1713″) PCB carbide drill bits $45.00

NEW – Twenty Four #81 (0.0130″) PCB carbide drill bits $29.00

NEW – 20 — # 74 (0.0225″) PCB carbide drill bits $25.00

NEW – Twenty 0.0610″ (1.549MM) PCB carbide drill bits $25.00

NEW – Thirty Five ‘#71′ (0.0260″) PCB carbide drill bits $38.00

NEW – Thirty 0.0571″ (1.45MM) PCB carbide drill bits $32.00

solid carbide step drill .435 x .85 bridgeport cnc $40.00

NEW – Twenty-five ’5.0MM ‘ (0.1968″) PCB carbide drill bits $26.00

NEW – Twenty-five ’3.4MM’ (0.1339″) PCB carbide drill bits $28.00

NEW – Forty ’4.35MM ‘ (0.1713″) PCB carbide drill bits $40.00

NEW – Twenty-five ‘(0.0079″) 0.20MM PCB carbide drill bits $26.00

2- 7/16″ Walter Titex A1166-12 Solid Carbide Drill Bits. 1 new 1 used $55.00

Southwick&Meister Robobar Collet-S&M #10 .157 Diameter-New-5 Pieces $24.99

2 NEW CONTROX 5/8″ SOLID CARBIDE END MILLS 2 FL Q486S $59.99

Carbide drills 3/8 dia $15.00

7/16″ Niagra Solid Carbide End mill Bit Cutter EOP55820 $55.00

Metal Removal 6.00MM SOLID CARBIDE REAMER LOT OF 10 $35.00

.4385″ Ultra Tool Series 453 Reamer. Solid Carbide Cutter Section. Shank Not $55.00

SOLID CARBIDE DRILL 9.7MM (.3819) HI PERF TIN GUHRING $44.00

SOLID CARBIDE DRILL 9.8MM (.3858) HI TUFF TIALN LONG $50.00

SOLID CARBIDE DRILL 9.8MM (.3858) HI TUFF UNCTD LONG $42.00

0.8 x 3.15mm – Solid Carbide Centre Drill 60° DIN333A $11.69

ISCAR 8.6mm 3xD SOLID CARBIDE DRILL COATED (#708) $62.00

GUHRING SOLID CARBIDE 6.350mm DRILL BIT $9.95

3/8″ DIA. NEW MORSE, SOLID CARBIDE DRILL BIT, DRILLING HOLES, USA $39.95

1/2″ DIA. NEW MORSE 4 FLUTE, SOLID CARBIDE END MILL, MACHINE CUTTER, USA $27.95

1/4″ DIA. NEW MORSE 4 FLUTE, SOLID CARBIDE END MILL, MACHINE, CUTTER, USA $15.95

1/8″ DIA. NEW MORSE, 4 FLUTE, SOLID CARBIDE END MILL, MACHINE, CUTTER, USA $8.95

10mm SOLID CARBIDE DRILL 2FL OAL 80mm (#710) v $52.80

SOLID CARBIDE END MILL CUTTER HEC062S3 K600 MM#1272891* $13.50

Exocarb 1/2″ x 1/2″ x 1″ x 3″ 4 Flute Solid Carbide Single Ball Nose End Mill $66.99

No Reserve! 1/4″shank, 3/32″ Solid Carbide Burr Bits, Various shapes, (36) New! $31.00

4 Solid Carbide Micro 100 Boring Bars NEW $55.00

Solid Carbide Flat Bottm End Mills 11 Cutters 1/4,5/64,3/32,1/32, Nice lot $50.00

HANITA 4mm 4 Flutes SOLID CARBIDE COATED ENDMILL $15.50

Star .4724 (12.0mm)Solid Carbide Coolant Thru Gun Drill $100.00

Smaill PCB Drill Press Drilling with 10pcs Drills 0.7/0.8/1.0/1.2/1.4 mm 12V $3.99

10 Pcs. HANITA 4mm 4 Flutes SOLID CARBIDE COATED ENDMILL $144.90

SGS 30305 Ser 3 3/64″ x1/8×7/64×1-1/2″ 2 Flute Solid Carbide Single End Mill *6 $8.95

SGS 30321 Ser 3 11/64″ x3/16×5/8×2″ 2 Flute Solid Carbide Single End Mill *6 $9.95

Metal Removal Carbide Spade Drill 3/32″ NEW (B*32) $9.95

HANITA 4.5mm 4 Flutes SOLID CARBIDE COATED ENDMILL $20.50

10 Pcs. HANITA 4.5mm 4 Flutes SOLID CARBIDE COATED ENDMILL $192.90

HANITA 5mm 4 Flutes SOLID CARBIDE COATED ENDMILL $20.50

SINGLE END MILL 1 X 1 X 1-3/4 X 4 4FL SOLID CARBIDE $149.99

10 Pcs. HANITA 5mm 4 Flutes SOLID CARBIDE COATED ENDMILL $192.90

5/16″ x 1″ x 5/16″ DIAMOND CUT SOLID CARBIDE ROUTER $21.99

HANITA 6mm 4 Flutes SOLID CARBIDE COATED ENDMILL $20.50

10 Pcs. HANITA 6mm 4 Flutes SOLID CARBIDE COATED ENDMILL $192.90

HANITA 8mm 4 Flutes SOLID CARBIDE COATED ENDMILL $22.60

AMERICAN MADE .2005″ Solid Carbide Chucking Reamer H30 $19.95

M.A. FORD Carbide Parabolic Drill 4.90mm 3FL [YB107] $30.00

New Kennametal Solid Carbide Rougher End Mill 2406169 25mm F4BS2500AWX38R050 4F $229.99

HANITA 4J65BX 1″ Dia Solid Carbide End Mill 1/4″ Radius $59.95

DW6441 DEWALT SOLID CARBIDE FLUSH TRIMMER ROUTER BIT $9.99

Solid Carbide 5/8″ Diameter Chuck Reamer Straight Flute MA Ford USA Chucking $89.99

Solid Carbide Endmills 2 Flute Ballnose R2 End mill HRC35 mills $4.99

(10) FS Tool Solid Carbide Reversible Knives, 303000 $24.00

Black & Decker router bit trimming saw solid carbide 1/4 shank $7.00

Black & Decker Laminate Trim Bit 1/4″ shank solid carbide $7.00

# 6-32 SOLID CARBIDE TAP 2 FLUTE PLUG made by North USA $80.00

# 8-32 SOLID CARBIDE TAP 2 FLUTE PLUG made by North USA $85.00

30 SOLID CARBIDE DRILLS LOT, JOBBER, BOARD, NEW $42.00

(10) FS Tool Solid Carbide Reversible Knives, 305000 $25.00

USA 9/32″ STRAIGHT FLUTE CARBIDE DRILL – 200-2812 $36.28 $14.99

FULLERTON TOOL 1410 .135 SOLID CARBIDE REAMER $18.24

Solid Carbide Drill Bit – 2.5mm Diameter – Drilling $5.92

USED MITSUBISHI 2.5MM L/S SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $6.30

USED MITSUBISHI 3.5MM SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $9.46

Lot of 10 YG Solid Carbide 1/4″ TiALN Coated 4 Flute End Mills NEW $78.00

USED MITSUBISHI 8MM SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $12.62

USED MITSUBISHI 8.4MM SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $12.62

Solid Carbide Acrylic Router Bits $24.84 Solid Carbide Acrylic Router Bits

Solid Carbide Flush Trimmer Router Bits $10.72 Solid Carbide Flush Trimmer Router Bits

Solid Carbide Self-Pilot Bevel Router Bits $15.65 Solid Carbide Self-Pilot Bevel Router Bits

Solid Carbide Drill #28 Solid Carbide Drill $28.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #29 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #33 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #36 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #56 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #50 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #38 Solid Carbide Drill $29.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #31 Solid Carbide Drill $29.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

M.A. Ford Solid Carbide Burrs #1 Foredom Solid Carbide Burr $19.99 M.A. FORD SOLID CARBIDE BURRS Mfg: Brownells SPECS: 25 flutes; right hand spiral and rotation; No. 3 cut; 1/8′ (3.2mm) shank; All cutting surfaces are ¼" (6.3mm) dia. with lengths as follows: #1 = 9/16" (14.3mm) and #2 = ½" (12.7mm).

M.A. Ford Solid Carbide Burrs #2 Foredom Solid Carbide Burr $19.99 M.A. FORD SOLID CARBIDE BURRS Mfg: Brownells SPECS: 25 flutes; right hand spiral and rotation; No. 3 cut; 1/8′ (3.2mm) shank; All cutting surfaces are ¼" (6.3mm) dia. with lengths as follows: #1 = 9/16" (14.3mm) and #2 = ½" (12.7mm).

Festool 484515 HW 82 SD Solid Carbide Standard Spiral Blade $33 Solid Carbide Standard Spiral Blade – HW 82 SD – 484515

Bosch 85285MC Solid Carbide Flush Trimmer Bit $7.08 Bosch 85285MC Solid Carbide Flush Trimmer Bit Self-piloting bit makes flush, trim and edge cuts. Bosch 85285MC Solid Carbide Flush Trimmer Bit Specifications: All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router *Image shown may vary by color, finish, or material

Bosch 85286MC Solid Carbide Bevel Trimmer Bit $7.08 Bosch 85286MC Solid Carbide Bevel Trimmer Bit Provides a 7-1/2 Degree bevel on the trim edge of plastic laminate surfaces. The self-pilot eliminates guide assembly. Bosch 85286MC Solid Carbide Bevel Trimmer Bit Specifications: (A.) Overall Diameter: 1/4″ (B.) Cutting Edge Length: 1/4″ (C.) Shank Diameter: 1/4″ (D.) Overall Length: 1-1/2″ (E.) Angle: 7-1/2″ *Image shown may vary by color, finish, or material

Pferd – Tungsten Carbide Bur Bits $23.3 Heavy-duty tungsten carbide bur bits. Pferd Tungsten Carbide Bur Bits Carbide burs made with submicrograin solid carbide Comes with a radius cylindrical, plain cylindrical or tree radius end shape With alternate diamond cut type design on head Ideal for heavy-duty uses in foundries, steel construction and shipyards

Bosch 85282 Solid Carbide Veining Bits $10.12 Bosch 85282 Solid Carbide Veining Bits Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch 85282 Solid Carbide Veining Bits Specifications: A. Overall Diameter:3/16″ B. Cutting Edge Length:25/64″ C. Shank Diameter:1/4″ D. Overall Length:1-1/2″

Carbide Flex Tips $14.9 Leki has created Universal Carbide Flextips, flexible synthetic tips that can “flex” us to 30 degrees without damaging the pole shaft. Beyond that point the tip will “break” off to save the lower shaft from damage. The Universal Carbide Flextip may be changed easily if broken or worn by simply knocking it off the shaft with a quick snap, apply the new tip, and tap down to secure.The use of carbide in the steel jacket of the Universal Carbide Flextip reaches a degree of hardness close to that of a diamond thus giving you a solid plant in all conditions.*The Carbide Flextips fit all Leki Fitness and Trekking Poles.Sold in pairs

Carbide Wilson Dovetail Cutter Carbide Wilson Dovetail Cutter $75.99 Solid carbide 2" (5cm) long. .375" (9.5mm) diameter shaft. 60° shoulder. Mfg: Brownells

SPIKES Tungsten Carbide Solid Double Bar Link Bracelet $133.5 SPIKES Tungsten Carbide Solid Double Bar Link Bracelet Show off your style with the tungsten carbide double bar link bracelet. This fashionable bracelet will complete any outfit. SPIKES stainless steel jewelry is a trendsetting 316L jewelry collection created for today’s stylish men and women who want leading-edge jewelry designs. Specifications: 9.06 Inch Length, .28 inch Width, Tungsten Carbide

Festool 484520 HK 82 SD Standard Smooth Planer Head with Solid Carbide Spiral Blade $142 HK 82 SD Standard Smooth Planer Head – 484520. Solid Carbide Spiral Blade – 484515

Bosch 86026M Solid Carbide Double Flute Compression Up/Down Spirals $34.1 Bosch 86026M Solid Carbide Double Flute Compression Up/Down Spirals Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch 86026M Solid Carbide Double Flute Compression Up/Down Spirals Specifications: A. Overall Diameter: 1/4″ B. Cutting Edge Length: 7/8″ C. Shank Diameter: 1/4″ &#

Carbide Putty $918.28 Carbide Putty

Carbide Scrapers $13.31 Carbide Scrapers

Solid Carbide Ball End Mills 5/16" Carbide Ball End Mill $42.99 Four-flute center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut right-hand helix. Use in right-hand turning equipment. Single-ended. Premium high feed rate carbide for hardened steels. Mfg: Brownells SPECS: Shank dia. is same as cut dia. Overall lengths from 2½" (6.35cm) to 3" (7.62cm). ¼" (6.35mm) dia. x .750" (19mm) long cut. 5/16" (7.9mm) dia. x .812" (20.6mm) long cut. 3/8" (9.5mm) dia. x .875" (22.2mm) long cut.

Solid Carbide Ball End Mills 3/8" Carbide Ball End Mill $47.25 Four-flute center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut right-hand helix. Use in right-hand turning equipment. Single-ended. Premium high feed rate carbide for hardened steels. Mfg: Brownells SPECS: Shank dia. is same as cut dia. Overall lengths from 2½" (6.35cm) to 3" (7.62cm). ¼" (6.35mm) dia. x .750" (19mm) long cut. 5/16" (7.9mm) dia. x .812" (20.6mm) long cut. 3/8" (9.5mm) dia. x .875" (22.2mm) long cut.