NEWJERSEYLANDVALUETAX.ORG

Monty Python’s Flying Circus – “Working Class Playwright”

10x 0.2mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

10x 0.4mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

10x 0.5mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

10x 0.7mm NEW Carbide PCB Dremel Jewelry CNC Drill Bits $0.99

VINTAGE SOLID CARBIDE BITS BY CUTWELL – RANSOM & RANDOLPH – NEVER USED – #557 $19.00

VINTAGE SOLID CARBIDE BITS – MADE IN SWITZERLAND – BY MILTEX – BATCH #336 $19.00

NEW MONSTER TOOL SOLID CARBIDE 6-FLUTE COUNTERSINK SET 82° USA 1/4″,1/2″,3/4″,1″ $209.99

SUMITOMO SOLID CARBIDE 3/4″ WITH 3/4 STRAIGHT SHANK $125.00

HI-ROC1/2″CARBIDE TIPPED DIE DRILL USA $35.00

SOLID CARBIDE 9-64 SPADE DRILL $15.00

solid carbide step drill .435 x .787 bridgeport cnc $35.00

solid carbide step drill .435 x .787 cnc mill shop new $40.00

SUMITOMO 12.5MM Solid Carbide Drills, 2F , Tialn coated. $54.00

SOLID CARBIDE DRILL 3/8 (.375) HI TUFF UNCOATED USA $34.00

NEW – 20 — # 65 (0.0350″) PCB carbide drill bits $25.00

NEW – Forty ’4.35MM ‘ (0.1713″) PCB carbide drill bits $45.00

NEW – Twenty Four #81 (0.0130″) PCB carbide drill bits $29.00

NEW – 20 — # 74 (0.0225″) PCB carbide drill bits $25.00

NEW – Twenty 0.0610″ (1.549MM) PCB carbide drill bits $25.00

NEW – Thirty Five ‘#71′ (0.0260″) PCB carbide drill bits $38.00

NEW – Thirty 0.0571″ (1.45MM) PCB carbide drill bits $32.00

solid carbide step drill .435 x .85 bridgeport cnc $40.00

NEW – Twenty-five ’5.0MM ‘ (0.1968″) PCB carbide drill bits $26.00

NEW – Twenty-five ’3.4MM’ (0.1339″) PCB carbide drill bits $28.00

NEW – Forty ’4.35MM ‘ (0.1713″) PCB carbide drill bits $40.00

NEW – Twenty-five ‘(0.0079″) 0.20MM PCB carbide drill bits $26.00

2- 7/16″ Walter Titex A1166-12 Solid Carbide Drill Bits. 1 new 1 used $55.00

Southwick&Meister Robobar Collet-S&M #10 .157 Diameter-New-5 Pieces $24.99

Carbide drills 3/8 dia $15.00

SOLID CARBIDE DRILL 9.7MM (.3819) HI PERF TIN GUHRING $44.00

SOLID CARBIDE DRILL 9.8MM (.3858) HI TUFF TIALN LONG $50.00

SOLID CARBIDE DRILL 9.8MM (.3858) HI TUFF UNCTD LONG $42.00

0.8 x 3.15mm – Solid Carbide Centre Drill 60° DIN333A $11.69

ISCAR 8.6mm 3xD SOLID CARBIDE DRILL COATED (#708) $62.00

GUHRING SOLID CARBIDE 6.350mm DRILL BIT $9.95

3/8″ DIA. NEW MORSE, SOLID CARBIDE DRILL BIT, DRILLING HOLES, USA $39.95

10mm SOLID CARBIDE DRILL 2FL OAL 80mm (#710) v $52.80

Solid Carbide Flat Bottm End Mills 11 Cutters 1/4,5/64,3/32,1/32, Nice lot $50.00

Star .4724 (12.0mm)Solid Carbide Coolant Thru Gun Drill $100.00

Smaill PCB Drill Press Drilling with 10pcs Drills 0.7/0.8/1.0/1.2/1.4 mm 12V $3.99

Metal Removal Carbide Spade Drill 3/32″ NEW (B*32) $9.95

M.A. FORD Carbide Parabolic Drill 4.90mm 3FL [YB107] $30.00

30 SOLID CARBIDE DRILLS LOT, JOBBER, BOARD, NEW $42.00

USA 9/32″ STRAIGHT FLUTE CARBIDE DRILL – 200-2812 $36.28 $14.99

Solid Carbide Drill Bit – 2.5mm Diameter – Drilling $5.92

USED MITSUBISHI 2.5MM L/S SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $6.30

USED MITSUBISHI 3.5MM SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $9.46

USED MITSUBISHI 8MM SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $12.62

USED MITSUBISHI 8.4MM SOLID CARBIDE THRU COOLANT DRILL LATHE MILL TURN CNC $12.62

KEO Carbide Spotting Drill 5/8″ 120 deg NC 1″ x 3-1/2″ RH [BN57] $50.00

Solid Carbide Drill Bit – 6.0mm Diameter – Drilling $10.25

Solid Carbide Drill Bit – 6.5mm Diameter – Drilling $11.04

ISCAR IDI 0886 SG GRADE IC908 CARBIDE DRILLING INSERT $79.75

solid carbide drill 10.32 MM cnc lathe mill bridgeport $25.00

MICRO 100 Carbide Spottering Centering Drill 3/4″ x 1-1/8″ x 2-1/2″ 100 dg [100] $85.00

MICRO 100 Carbide Spottering Centering Drill 3/4″ x 1-1/8″ x 2-1/2″ 120 dg [482] $85.00

solid carbide drill 7.9 MM cnc lathe mill bridgeport $22.00

MICRO 100 Carbide Spottering Centering Drill 3/4″ x 1-1/8″ x 2-1/2″ 120 dg [483] $85.00

new solution tool ,solid carbide 18 mm(.7068) 3 flute drill.5″ oal. $19.99

Solid carbide tool blank 0.125 (1/8) x 6 blank rod ground OD machine shop drill $8.50

Sumitomo MDS126SV-NTK 0.488″ Solid Carbide Drill Bit Factory Regrind $75.00

Sumitomo 5DEZ51-2 11mm to 14mm Solid Carbide Subland Step Drill Factory Regrind $110.00

SGS Carbide Drill Bit 3//8″ x 3/8″ x 2-13/32″ x 4″ TiAlN 51525 [483] $125.00

ATRAX No.12 135° Solid Carbide Slow Speed Drill NEW *2 $9.95

5.3mm OSG EX-GD XL GOLD DRILL PARABOLIC HSS-COBALT TIN COATED #8591553NEW $42.92 $19.99

10 – #74 (.0225″) Printed Circuit Board Drills (PCB) Kyocera Tycom $13.00

new solution tool ,solid carbide 18 mm(.7068) 3 flute drill.5″ oal. $19.99

TUNGALOY DMXU2420VS AH170 Letter C .2420″ 2XD Flash Coated Carbide Drill i16 $24.95

CARBIDE DRILLS FOR DRILLING GLASS $10.00

3/16″ CARBIDE STRAIGHT FLUTE DRILLS (10 PCS) TiALN COATED USA MADE 470-101875B $132.80

Mitsubishi MZS0600MB VP15TF Solid Carbide Drill $38.50

NEW .021 inch Carbide PC Board drill Lot of 100 drills $10.00

NEW .026 inch Carbide PC Board drill Lot of 100 drills $10.00

NEW .0245 inch Carbide PC Board drills Lot of 50 drills $5.00

SGS Drill 5Xd,Coated Carbide,Double Margin, 21/64″ Dia. $15.95

Carbide Twist Drill Bit .1600″ Diameter Type S $24.96

Carbide Twist Drill Bit .3780″ Diameter Type AH $19.20

NEW SOLID CARBIDE MILL DRILL 1/4″ USA 1308 $9.95

A CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $19.64

T CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $40.58

U CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $42.34

1/4 Stub Length High Performance Carbide Drill Hardlube Coating Drill NEW Garr $14.95

1/4 Screw Machine Length Hi-Tuff Carbide Drill Bright Finish Drill NEW M.A. For $9.95

#31 Stub Length High Performance Carbide Drill Hardlube Coating Drill NEW Garr $4.95

27/64 Jobber Length General Purpose Carbide Drill TiN Coated Drill NEW Garr Too $24.95

1/8 Stub Length High Performance Carbide Drill Hardlube Coating Drill NEW Garr $9.95

#45 Screw Machine Length Hi-Tuff Carbide Drill Bright Finish Drill NEW M.A. For $4.95

5/16 3FL Jobber Length General Purpose Carbide Drill Bright Finish Drill NEW Gar $19.95

51/6 Stub Length High Performance Carbide Drill Hardlube Coating Drill NEW Garr $19.95

#19(.166) Jobber Length General Purpose Carbide Drill Hardlube Coating Drill NE $24.95

V CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $42.98

W CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $44.04

X CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $47.90

Y CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $52.64

FULLERTON Carbide Stub Drill 9/16″ 2FL 1-1/4″ x 3-1/2″ 15256 [390] $38.00

Z CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT $54.10

SOLID CARBIDE DRILL 37/64 (.5781) C0OLANT THRU TIN USA $115.00

NEW 4.65mm (.1831″) Printed Circuit Board Drills (PCB) $2.50

TITEX A3385TFL-10.8 Carbie Drill 10.8 mm. through the tool coolant NEW $50.00

50 Micro Carbide Drill Bits…#62…0380″……….1353 $19.95

Solid Carbide Drill #28 Solid Carbide Drill $28.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #29 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #33 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #36 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #56 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #50 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #38 Solid Carbide Drill $29.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #31 Solid Carbide Drill $29.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Carbide Hammer Drill Bit Sets $32.04 Carbide Hammer Drill Bit Sets

Carbide-Tipped Hammer Drill Bits $12.73 Carbide-Tipped Hammer Drill Bits

Carbide Tipped Hammer Drill Bits $66.23 Carbide Tipped Hammer Drill Bits