Inserts Grip
February 28th, 2011
Is there something wrong with my Canon battery grip for the 20d?
I just got it and it does NOT sustain my battery life it actually GREATLY reduces it! I put 2 fully charged batteries in there and it is dead in the first 20 minutes!!!!! One battery inserted in my camera without the grip will last 1-2 hours! What is the deal? I have tried it 3 or 4 times and it happens every time!
Is this grip from Canon and are you using Canon Li-ion batteries … if so, you are under warranty and Canon can repair it. Your description would indicate some kind of short in your grip
You batteries should last weeks without any loss in power and with the two in the grip, you should be able to produce over 600 images before you need to worry about charging them.
While I have a Nikon, I can get about 350 images from the first battery and then start charging it while I am using the second battery in my MB-D200 (grip)
ruger sp101 custom DIY grip insert
|
|
Bowling Turbo 2-N-1 Grips Quad Finger Insert Tip YOU CHOOSE COLORS AND SIZES $2.99 |
|
|
New drag specialties black billet wave grips with rubber inserts 84-12 Models* $129.95 |
|
|
New drag specialties chrome billet wave grips with rubber inserts 84-12 Models* $129.95 |
|
|
Vise Grips P/O Bowling Finger Insert You Choose Color and Size $2.95 |
|
|
Vise Grips P/S Bowling Finger Insert You Choose Color and Size $2.95 |
|
|
Vise Grips P/S Bowling Finger Insert Bag of 10 You Choose Color and Size $9.99 |
|
|
Vise Grips P/S Bowling Finger Insert Bag of 20 You Choose Color and Size $19.99 |
|
|
Vise Grips P/S Bowling Finger Insert Bag of 50 You Choose Color and Size $49.99 |
|
|
Vise Grips P/S Bowling Finger Insert Bag of 100 You Choose Color and Size $99.99 |
|
|
Vise Grips Bowling Finger Inserts Bag of 50 Grips You Choose Colors and Sizes $49.99 |
|
|
Vise Grips Bowling Finger Inserts Bag of 100 Grips You Choose Colors and Sizes $99.99 |
|
|
Pearce Grip Frame Insert Black For Glock 20SF PGFI20SF $6.09 |
|
|
Pearce Grip Glock Grip Frame Insert PG-GFI $7.40 |
|
|
COLTENE WHALEDENT SCALER INSERT 25k ST. GRIP DENTAL ultrasonic dentsply NEW $80.00 |
|
|
Carbite CZ 1 Balanced with elastomer insert, 34 1/2″ length, Winn Heritage Grip $9.99 |
|
|
15/64″ Shaft Insert Dia Knurled Grip Potentiometer Pointer Knobs 10 Pcs $3.44 |
|
|
1 Blank Insert Retractable Pen w/ Blue Color Grip $0.99 |
|
|
RUGER GP-100 LEFT SIDE PLASTIC GRIP INSERT ONLY UNISSUED $2.99 |
|
|
“Soft Roll” Polymer Insert 41″ Belly Putter Golf Club – Winn Master Wrap Grip $22.50 |
|
|
Red Cedar split grip spinning rod handle and reel seat insert $19.99 |
|
|
Turbo 2-N-1 Grips Quad Classic Bowling Finger Insert White|065-49/64 $2.99 |
|
|
Turbo 2-N-1 Grips Quad Classic Bowling Finger Insert White|045-45/64 $2.99 |
|
|
Dymonwood split grip spinning rod handle and reel seat insert $21.99 |
|
|
15/64″ Shaft Insert Dia Knurled Grip Potentiometer Pointer Knobs 10 Pcs $4.47 |
|
|
Ed Thomas Thin Grip Grip Thumb Insert Tape Qty 2 $4.99 |
|
|
Pearce Grip Rubber Finger Groove Insert for Colt Government Model 1911 $12.99 |
|
|
Turbo 2-N-1 Grips Quad Classic Bowling Finger Insert Ice|065-49/64 $2.99 |
|
|
Double Wells Fly Rod Cork Grips with Insert. 3 Each $9.95 |
|
|
Double Wells Fly Rod Cork Grips with Insert. 3 Each $9.95 |
|
|
Double Wells Fly Rod Cork Grips with Insert. 3 Each $9.95 |
|
|
Double Wells Fly Rod Cork Grips with Insert. 3 Each $9.95 |
|
|
ISCAR SGSF-76-1.6-1.000A SELF GRIP SLOTTING CUTTER WITH 38 ISCAR CARBIDE INSERTS $424.99 |
|
|
ISCAR SGSF-50-2-8KR SELF GRIP SLOTTING CUTTER WITH 15 ISCAR CARBIDE INSERTS $324.99 |
|
|
Pedag Suede Leather Heel Grips Ball Foot No Slip Pads Shoe Inserts Insoles NEW $2.99 |
|
|
10 NEW ISCAR CUT GRIP INSERTS GIF 6.00E-0.80 IC20 $142.25 |
|
|
20 NEW ISCAR HELI GRIP INSERTS GRIP 6005Y IC354 $284.49 |
|
|
10 NEW ISCAR HELI GRIP INSERTS HFPR 6030 IC20 $126.44 |
|
|
10 NEW ISCAR SELF GRIP INSERTS GFN 6 IC328 $126.44 |
|
|
MASTER GRIP “427DC” Offset Insert Alignment MALLET PUTTER LH $19.99 |
|
|
1997 LEAF JEFF BAGWELL & PAT HENTGEN GET A GRIP INSERT SER#/3500 ASTROS/BLUEJAYS $0.79 |
|
|
ISCAR GTL 4 45D IC20 Carbide Inserts Grooving 10 Pcs Self Grip Lathe Tool Holder $49.00 |
|
|
HARLEY BIKER HEATED GRIPS INSERTS SWITCH RELAY HARNESS FROM EASTERN BEAVER CO $24.99 |
|
|
Pearce Grip Finger Groove Insert for Springfield V10, Colt Officer/CCO/Defender $14.99 |
|
|
Butt Plate & Grip Cap for Ted Williams Shotgun with White Line Insert $19.95 |
|
|
10 NEW ISCAR HELI GRIP HFPR 6030 IC20 GROOVING INSERTS $113.79 |
|
|
10 NEW ISCAR SELF GRIP GFF 2N IC20 GROOVING INSERTS $41.08 |
|
|
True Temper Sensi-Core Inserts – pack of 8 $27.99 |
|
|
PEARCE GRIP GLOCK GRIP FRAME INSERT $0.99 |
|
|
BRIGGS AND STRATTON GRIP INSERT 396892 $3.95 |
|
|
Pearce Grip Rubber Finger Groove Insert for Colt Government Model 1911 $12.99 |
|
|
Winchester 370, 37A, 840, 101, 1500XTR, 70A & 770 Steel Scroll Grip Cap Insert $6.45 |
|
|
PEARCE GRIP GLOCK SUBCOMPACT GRIP FRAME INSERT $6.00 |
|
|
PEARCE GRIP SUBCOMPACT GRIP FRAME INSERT MODEL 29&30 SH $6.00 |
|
|
PEARCE GRIP GLOCK GRIP FRAME INSERT $6.00 |
|
|
PEARCE GRIP GLOCK SUBCOMPACT FRAME INSERT M/ 20 & 21 SH $6.00 |
|
|
ISCAR SGSF-50-4-8K SELF GRIP SLOTTING CUTTER WITH 26 ISCAR CARBIDE INSERTS $374.99 |
|
|
Pearce Grip plug insert for Gen 4 Glock mid and full size PGG4MF $7.39 |
|
|
ISCAR TGMF 304 Top Grip Carbide Inserts Grooving 10 Pcs Lathe Tool Holder $49.00 |
|
|
ISCAR TGMP 506 Top Grip Carbide Inserts Grooving 10 Pcs Lathe Tool Holder $49.00 |
|
|
ISCAR GTFG 4R-P Carbide Inserts Grooving 10 Pcs Lathe Self Grip Tool Holder $49.00 |
|
|
ISCAR GTFG 4R-P Carbide Inserts Grooving 10 Pcs Lathe Self Grip Tool Holder $49.00 |
|
|
ISCAR TGMF 404 Top Grip Carbide Inserts Grooving 10 Pcs Lathe Tool Holder $49.00 |
|
|
Chrome O-Ring Insert Handlebar Grip Set W/Throttle Tubes for Harley’s free ship! $69.99 |
|
|
15/64″ Shaft Insert Dia Knurled Grip Potentiometer Pointer Knobs 10 Pcs $4.29 |
|
|
PEARCE FINGER GROOVE GRIP INSERT FOR A 1911 PISTOL $12.95 |
|
|
Honda ATC Handle Bar Bolts and Grip Inserts $3.99 |
|
|
Honda ATC Handle Bar Bolts and Grip Inserts $2.99 |
|
|
Honda ATC Handle Bar Bolts and Grip Inserts $3.99 |
|
|
Honda ATC Handle Bar Bolts and Grip Inserts $3.99 |
|
|
Walnut Wood Better Grip Guitar Pick [With fender insert tip ] $4.99 |
|
|
DUNLOP “VISION” PLUS VP-3, POLYMER FACE INSERT, 35″ FLAT FRONT GRIP $8.50 |
|
|
Pearce Grip Frame Insert Black Glock PGFI20SF $6.03 |
|
|
Pearce Grip Frame Insert Black Glock PGFI29 $6.03 |
|
|
Pearce Grip Frame Insert Black Glock PGFI30SF $6.03 |
|
|
Pearce Grip Frame Insert Black Glock PGFI36 $6.03 |
|
|
Pearce Grip Grip Insert Black GLK Gen4 Mid/Full Size PGG4MF $6.03 |
|
|
Pearce Grip Frame Insert Black GLK Gen4 26,27,33,39 PGG4SC $6.03 |
|
|
Pearce Grip Frame Insert Black Glock PGGFI $6.03 |
|
|
15/64″ Shaft Insert Dia Knurled Grip Potentiometer Pointer Knobs 10 Pcs $3.92 |
|
|
ALBERT BELLE/HIDEO NOMO 1997 Leaf Get-A-Grip INSERT /3500 $3.99 |
|
|
SELF GRIP CUT-OFF TOOL SET CARBIDE INSERTS A828 $80.00 |
|
|
Hand Carved Wood Grip Panel Inserts for Ruger SP101 $27.00 |
|
|
Grip Rite Insert Plastic Coil Nails 1 3/4″ x.090 6300 $125.00 |
|
|
MILLER R/C Sky Grip Rubber Starting Insert (1) SG 201: for 12v Starter: Airplane $10.99 |
|
|
Master #789 Grip Grabber Finger Insert Remover FREE SHP $34.95 |
|
|
1997 Leaf “Get A Grip” Insert Set 12 of 16 cards! Serial Numbered! L@@K! $32.99 |
|
|
Turbo 2-N-1Grips Red Handle Switch A Roo Bowling Ball Insert Removal Tool $15.95 |
|
|
15/64″ Shaft Insert Dia Knurled Grip Potentiometer Pointer Knobs 10 Pcs $4.28 |
|
|
Pearce Grip Rubber Finger Groove Insert for Colt Government Model 1911 $12.99 |
|
|
10 NEW ISCAR GROOVING INSERTS GRIP 6030Y IC354 $134.34 |
|
|
10 NEW ISCAR GROOVING INSERTS GRIP 6005Y IC354 $134.34 |
|
|
NewKut K-Grip KGTN-6 NK350 Carbide Insert $4.99 |
|
|
Buzz Henry Insert grips for cap gun new $25.00 |
|
|
VALENITE PRO GRIP LATHE TOOL CARBIDE INSERTS X519 $79.99 |
|
|
Pearce Grip GLOCK Sub Compact Size model Grip Frame Insert PG-GFISC $6.69 |
|
|
Chrome Plated Harley Rail Style Barrel Grips with Rubber Inserts $69.99 |
|
|
ISCAR TAG N1.4J IC807 CARBIDE INSERT CUT OFF TANG GRIP CNC LATHE NEW! $6.99 |
|
|
ISCAR TAG N1.4J IC808 CARBIDE INSERT CUT OFF TANG GRIP CNC LATHE NEW! $6.99 |
|
|
ISCAR TAG N2C IC20 CARBIDE INSERT CUT OFF TANG GRIP CNC LATHE NEW! $5.99 |
|
|
ISCAR TAG N2J IC20 CARBIDE INSERT CUT OFF TANG GRIP CNC LATHE NEW! $5.50 |
|
|
Grip Panels 1 Piece No Inserts Grip Panels 1 Piece No Inserts $7.99 GRIP PANELS 1 PIECE NO INSERTS Mfg: Ruger |
|
|
Grip 1-Pc Rubber Compact No Inserts Grip 1-Pc Rubber Compact No Inserts $9.6 GRIP 1-PC RUBBER COMPACT NO INSERTS Mfg: Ruger |
|
|
Grip Panels W/Plastic Inserts Grip Panels W/Plastic Inserts $17.96 GRIP PANELS W/PLASTIC INSERTS Mfg: Ruger |
|
|
Ak-47 Grip W/ Interchangeable Inserts Ak-47 Pistol Grip W/Inserts $40.79 Drop-on replacement for factory grip includes rubberized front and rear inserts that help you customize the grip to fit your exact hand size for even greater comfort and control. Three front inserts let you select the depth of the finger grooves while rear inserts provide three options for the heel of the hand. Stippled surfaces and deep grooves ensure a firm grip even with a wet hand. Detachable polymer plug provides easy access to internal storage compartment. Mfg: Command Arms Acc SPECS: Synthetic polymer/rubber black matte finish. Approximately 4¼" (10.8cm) high 2"-2½" (5.1-6.3cm) wide 1-5⁄16" (3.3cm) thick 3.3 oz. (93g) weight. |
|
|
Stock Inserts Inserts 10-Pak $29.95 CNC machined threaded brass bushings provide added strength and security for screwing down sling studs recoil pads and triggerguards in wood composite and fiberglass stocks. Lets you turn a screw in tight without the worry of stripping it out of the stock material. Heavily knurled on the outside to hold plenty of epoxy bedding for a rock-solid grip between the insert and stock. Kits available for mounting sling studs recoil pads and Remington ADL triggerguards plus a 10-pak of general use inserts. Mfg: Brownells SPECS: Brass knurled. ½" (12.7mm) long x 5⁄16" (7.9mm) diameter. All inserts have 10-32 tpi internal threads. Sling Stud Inserts – (2) inserts (2) steel dome-top sling studs matte blued. Recoil Pad Inserts – (2) inserts (2) ¾" (19mm) long stainless steel roun |
|
|
Inserts $3.26 Inserts |
|
|
Stock Inserts Sling Stud Inserts 2-Pak $6.95 CNC machined threaded brass bushings provide added strength and security for screwing down sling studs recoil pads and triggerguards in wood composite and fiberglass stocks. Lets you turn a screw in tight without the worry of stripping it out of the stock material. Heavily knurled on the outside to hold plenty of epoxy bedding for a rock-solid grip between the insert and stock. Kits available for mounting sling studs recoil pads and Remington ADL triggerguards plus a 10-pak of general use inserts. Mfg: Brownells SPECS: Brass knurled. ½" (12.7mm) long x 5⁄16" (7.9mm) diameter. All inserts have 10-32 tpi internal threads. Sling Stud Inserts – (2) inserts (2) steel dome-top sling studs matte blued. Recoil Pad Inserts – (2) inserts (2) ¾" (19mm) long stainless steel roun |
|
|
Stock Inserts Recoil Pad Inserts 2-Pak $5.95 CNC machined threaded brass bushings provide added strength and security for screwing down sling studs recoil pads and triggerguards in wood composite and fiberglass stocks. Lets you turn a screw in tight without the worry of stripping it out of the stock material. Heavily knurled on the outside to hold plenty of epoxy bedding for a rock-solid grip between the insert and stock. Kits available for mounting sling studs recoil pads and Remington ADL triggerguards plus a 10-pak of general use inserts. Mfg: Brownells SPECS: Brass knurled. ½" (12.7mm) long x 5⁄16" (7.9mm) diameter. All inserts have 10-32 tpi internal threads. Sling Stud Inserts – (2) inserts (2) steel dome-top sling studs matte blued. Recoil Pad Inserts – (2) inserts (2) ¾" (19mm) long stainless steel roun |
|
|
RAMKNI KO2900ABK Training Knife Black Handle with Black Grip Inserts No Edge $26.52 Features a 3.75 in. dull edge blade of stainless steel and a 4.63 in black handle with black rubber grip inserts liner lock and thumbstud. Comes complete with pocket clip. |
|
|
Stock Inserts Rem 700 Adl Insert $3.95 CNC machined threaded brass bushings provide added strength and security for screwing down sling studs recoil pads and triggerguards in wood composite and fiberglass stocks. Lets you turn a screw in tight without the worry of stripping it out of the stock material. Heavily knurled on the outside to hold plenty of epoxy bedding for a rock-solid grip between the insert and stock. Kits available for mounting sling studs recoil pads and Remington ADL triggerguards plus a 10-pak of general use inserts. Mfg: Brownells SPECS: Brass knurled. ½" (12.7mm) long x 5⁄16" (7.9mm) diameter. All inserts have 10-32 tpi internal threads. Sling Stud Inserts – (2) inserts (2) steel dome-top sling studs matte blued. Recoil Pad Inserts – (2) inserts (2) ¾" (19mm) long stainless steel roun |
|
|
Pearce Grip PGGFI Glock Grip Frame Insert $19.63 Pearce grip inserts install in the bottom rear cavity of the frame utilizing the lanyard hole for retention. For use on all mid and full size Glocks. Grip extension Replaces the magazine floor plate. Type: Grip Frame Insert. Finish: Black. Material: Polymer. |
|
|
Cooper Tools 21474 File Handle with Inserts, Carded $6.35 Cooper Tools 21474 File Handle with Inserts, Carded Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell chain, Crescent brand wrenches and pliers, Lufkin measuring tools, Nicholson files and saws, Plumb hammers, H.K. Porter bolt cutters, Weller soldering products, and Wiss snips. Cooper Tools 21474 File Handle with Inserts, Carded Features: Interchangeable cushion inserts designed to fit most popular files Handle made of strong high-impact material Contoured to fit hand for straight, lathe and draw filing Non-slip textured finish for easier grip 4 inserts Cooper Tools 21474 File Handle with Inserts, Carded Specifications: UPC Code: 037103214744 Material Type: Plastic Length: 4 in. Size: Not Assigned Packaging: Peg Hook/Retail Packaging Includes file handle and inserts Made in USA Carded |
|
|
Passenger Car ”String-Type” Tire Repair Inserts Kit $32.95 String-type inserts can be used in passenger or truck, radial or bias-ply tires. Made of butyl rubber, these inserts are very strong, allowing easy insertion through steel belted radials. String-type inserts are temporary repairs, sealing by compression only. Kit contains: 50 pieces fat, brown string 1 can (8 0z.) vulcanizing cement 1 pistol-grip spiral cement probe 1 pistol-grip end slot insert needle 15 pieces medium square nail hole repair 1 repair booklet |
|
|
Passenger Car ”String-Type” Tire Repair Inserts Tote Kit $19.95 String-type inserts can be used in passenger or truck, radial or bias-ply tires. Made of butyl rubber, these inserts are very strong, allowing easy insertion through steel belted radials. String-type inserts are temporary repairs, sealing by compression only. Tote Kit contains: 50 pieces of fat, brown string 1 can (8 oz.) vulcanizing cement 1 pistol-grip spiral cement probe 1 pistol-grip end slot insert needle 1 jar lubricant 1 razor knife 1 repair booklet |
|
|
Sparco Grip Universal Deal Pedal $69 The Sparco Grip Universal Deal Pedal has the same great design as the Sparco Grip pedal set with added small rubber inserts to minimize slipping. Great for cars with average footwell space, the Grip dead pedal adds some of that race car look to any o |
|
|
Remington 870 Pistol Grip System Pistol Grip $89.99 Pistol grip with integral MIL-STD 1913 Picatinny rail lets you install red dot sights ghost-rings and other optics on your tactical shotgun. Heavy duty 12-slot rail with radiused underside is contoured to fit the full-length of the receiver and holds tight with the included steel buttstock bolt even during heavy recoil. Open center design allows the use of iron sights however optics may have to be removed. Ergonomic pistol grip with pebble-textured hard rubber palm swells and finger grooves reduce shock enhance trigger control and improve weapon handling during sustained fire. Interchangeable grip panel system includes three different size palm swells and two different size finger gr Mfg: Command Arms Acc SPECS: Fits Remington 870 12 gauge only. Pistol Grip Molded polymer hard rubber inserts matte black. Extension Tube Aluminum hardcoat anodized matte black. 1.17" (2.98cm) O.D. Fits commercial diameter M-4 style buttstock. Buttstock Molded polymer matte black; adju |
|
|
Ar-15/M16 Universal Pistol Grip Universal Pistol Grip Tan $32.99 Drop-in replacement for factory pistol grip has interchangeable inserts that let you quickly customize your rifle with the amounts of palm swell and finger groove depth that suit you. Enhances weapon control and reduces fatigue during extended fire or long periods in the ready position. Three front-strap and three back-strap inserts let you select a front-to-back grip depth that fits your hand size. Inserts are made of textured rubber to further secure your hold under stress or with wet hands. Rear beavertail enables a high hand position for maximum recoil control while protecting the web of the hand from the receiver. Removable plug in bottom allows access to the roomy internal storage comp Mfg: Command Arms Acc SPECS: Injection-molded hard polymer with rubber inserts Black Tan or OD Green. Uses rifle’s existing pistol grip screw and washer. Pistol Grip includes grip core 3 front and 3 rear inserts 2 roll pins. |
|
|
Ar-15/M16 Universal Pistol Grip Universal Pistol Grip Black $32.99 Drop-in replacement for factory pistol grip has interchangeable inserts that let you quickly customize your rifle with the amounts of palm swell and finger groove depth that suit you. Enhances weapon control and reduces fatigue during extended fire or long periods in the ready position. Three front-strap and three back-strap inserts let you select a front-to-back grip depth that fits your hand size. Inserts are made of textured rubber to further secure your hold under stress or with wet hands. Rear beavertail enables a high hand position for maximum recoil control while protecting the web of the hand from the receiver. Removable plug in bottom allows access to the roomy internal storage comp Mfg: Command Arms Acc SPECS: Injection-molded hard polymer with rubber inserts Black Tan or OD Green. Uses rifle’s existing pistol grip screw and washer. Pistol Grip includes grip core 3 front and 3 rear inserts 2 roll pins. |
|
|
Ar-15/M16 Universal Pistol Grip Universal Pistol Grip O.D. Green $32.99 Drop-in replacement for factory pistol grip has interchangeable inserts that let you quickly customize your rifle with the amounts of palm swell and finger groove depth that suit you. Enhances weapon control and reduces fatigue during extended fire or long periods in the ready position. Three front-strap and three back-strap inserts let you select a front-to-back grip depth that fits your hand size. Inserts are made of textured rubber to further secure your hold under stress or with wet hands. Rear beavertail enables a high hand position for maximum recoil control while protecting the web of the hand from the receiver. Removable plug in bottom allows access to the roomy internal storage comp Mfg: Command Arms Acc SPECS: Injection-molded hard polymer with rubber inserts Black Tan or OD Green. Uses rifle’s existing pistol grip screw and washer. Pistol Grip includes grip core 3 front and 3 rear inserts 2 roll pins. |
|
|
Command Arms Accessories Interchangeable Pistol Grip $38.99 Incorporates multiple finger groove and palm swell inserts (3 each) allowing the user to customize their grip to fit all hand sizes for maximum comfort and control. |
|
|
Pistol Grip Nozzle $7.9 Brass head inserts, solid brass valve stems, rust resistant stainless steel spring. Heavy duty, full-size, die cast zinc body Insulated molded grip for spraying hot or cold water. Self adjusting duck packing for lifetime leak proof seal, heavy duty full size die cast zinc body. |
|
|
Grip $6 Grip – Zzz |
|
|
Win 30000290 Large Locking MultiTool Wood Inserts $33.18 23 Functions: fine edge blade large screwdriver small screwdriver bottle opener awl fish scaler hook remover ruler medium screwdriver medium cross driver can opener needle nose pliers regular pliers wire cutters and 9 different bits with coupler. The tool and bit set all come in a compact size sheath. All components lock. Spring loaded pliers. Nine piece bit set included. Outboard components. Textured inlays for easy grip. |
|
|
Kleer-Fax Hanging File Tabs, with Strip Inserts, 1/5 Cut, 10/BX, Clear. Box of 10 $2.61 Manufacturer: Kleer-Fax. Box of 10. Plastic 1/5 cut tabs are designed for use with hanging file folders. Reliable grip offers easy folder retrieval. Tabs include a strip of inserts. Customers also search for: Kleer-Fax, Inc.,Hanging Folders,Tab Inserts,Ta |
|
|
Gps-02 Grip Pod Gps-02 Grip Pod Black $154.99 Dual-function vertical grip locks to the bottom accessory rail of your tactical rifle’s forend to give you enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large deeply grooved release button and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground and will not snag on brush vehicle interior or other gear when retracted. Mfg: Gps Llc. SPECS: Reinforced polymer Black or Desert Tan. 6¼" (15.9cm) long with legs retracted. 8½" (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. GPS-02 Steel inserts in legs. 7.8 oz. (220g) weight. GPS-LE – 7 oz. (197g) weight. |
|
|
Sparco Grip Universal Pedal Set for Manual Transmission $69 The Sparco Grip Universal Pedal set has the same great design as the Sparco Grip dead pedal with added small rubber inserts to minimize slipping. Great for cars with minimal footwell space, the Grip pedal set adds some of that race car look to any of |