Cutter Bit Tool
Types Of Drill Bits
Drill bits are tools used in making cylindrical holes. Various types of drill bits are designed for different uses.
Drill bits are equipments or tools that are used in making cylindrical holes. Drill bits can also be referred to as a drilling machine. Drill bits are available in various drill types such as metal drills, gun drills, screw machine drills, core drills, step drills, spade drills, forstner drills, masonry drills, dental or surgical drills, wood bits, twist drills, drill blank taper drills and much more.
They are designed to cut while doing a clockwise rotating motion. Several drill bits are coolant fed. They contain a channel or hole for directing the coolant fed near to the cutting edges. The split point drill heads of drill bits are used for chip clearance and for excellent centering. Drill bits can also be used in cutting aluminum, general-purpose metals, brass, copper, bronze, ceramic, and plastic, stainless steel, steel, wood, titanium and hardened materials. Various types of drill bits are designed for different uses.
Listed below are some types of Drill Bits.
Twist Drill: It drills holes in plastic, metal and wood. This drill is currently produced with a width covering a range from 0.05 millimeters to 100 millimeters while its length is around 1000 millimeters. The most usual twist drill has a tip angle of 118 degrees. This is a proper angle for an extensive array of job. It also has a long series drill for extended length twist drills. It is not advisable to drill deep holes using this twist drill.
Diamond Drill Bit: This particular drill is used in the bathroom for updating or remodeling. It is also used in redesigning your kitchen decoration. Furthermore, it is used on ceramic, glass, tile, limestone, stained glass, marble, fiberglass, porcelain, stone, slate and porcelain tile. When using this drill, the main concern is to obtain water at the edge of the drill bit. Drilling fiberglass may be done with or without water but make sure that the fiberglass has ample amount of water just to get the drill wet.
Indexable Drill Bit: This provides an excellent performance in making short-hole drillings. Stainless steel is drilled 3x in diameter and only a short-hole must be done.
Listed below are some other types of drill bits
• Adjustable Bit: This is built with a changeable cutter blade to bore holes of various sizes. It is also used for drilling gaps for wiring or piping.
• Around-the-corner bit: It is used to cut arched holes that are stretched in corners with a diagonal cutting surface.
• Auger Bits: This drill creates drill holes in wooden materials. The drill ends have a screw head so that the bits may be self fed.
• Brad-point drill: This drill looks almost the same as the usual bits but it has sharpened point to make wood drilling a lot easier. This drill has cleaner holes other than spade bits.
• Counterbore: The drill allows a screw to be driven under the wood outside. The holes that are drilled may be filled with a plug or wire.
• Drill Saw Bit: It is used to cut holes such as wood and metal and can enlarge current holes.
• Countersink: A drill that has an angled tip design that forms a “slump” in the screw head.
• Fly cutter: This one is often used to cut circles in wood and other soft metals. The diameter of circles may be adjusted by changing the cutter blade setting.
• Hole saw: It cut holes from one to six centimeters in diameter and has a center bit for directing the cutting blade edge of the saw.
• Reamer bit: The tapered bit of reamer may be used on existing holes rather than to enlarge holes.
• Screw pilot bit: This beautiful bit is used for drilling body holes. A pilot hole is used along with the countersink.
• Wire Brushes: It use to remove rust and to clean up metal and is available either as a wheel or a cup with wire brush.
• Plastic bit: This is designed with a tip so as to prevent splintering when drilling plastic. It is important to reduce the speed and slowly drill the other side of the plastic.
• Plug cutter: Use this to remove cylindrical shapes from the wood. It covers the screw using a small cylindrical plug.
About the Author
For more information on
Diamond Drill Bits
please visit our website.
Rockler T-Slot Cutter Router Bit
|
|
Slot Undercut Router Bit Cutter 3/16″ Depth 1 1/4″ Cut Length 1/2″ Shank $7.50 |
|
|
9 PC 1/4″ SHANK CARBIDE TIP CUTTER TIPPED WOOD ROUTER BIT SET KIT $29.99 |
|
|
V Type Slotting Slot Cutter Router Bits 1/4″ X 3/8″ $3.30 |
|
|
15 PC 1/4″ SHANK CARBIDE TIP CUTTER TIPPED WOOD ROUTER BIT SET KIT $39.99 |
|
|
3 NEW Craftsman Ogee Window + Door Stop Molding Cutter Bit Blades $11.11 |
|
|
VINTAGE LOT OF 28 X P & N CUTTER TOOL BITS $14.80 |
|
|
Wood Cutting Hex Shaft 20mm Dia Auger Drill Bit Cutter $9.90 |
|
|
Rotary tool cordless fits dremel bits drum sander wood carving hobby cutter cut $4.99 |
|
|
Black Shaft Metal Twist Drill Bit Hole Saw Cutter 23mm $6.01 |
|
|
Undetachable 30mm Dia Alloy Drill Bit Hole Saw Cutter $6.54 |
|
|
Freud Slot Cutter Router Bit Replacement Arbor 60-100 $8.99 |
|
|
Hex Wrench 32mm Steel HSS Hole Saw Drill Bit Cutter $6.42 |
|
|
Rotary tool cordless fits dremel bits pet nail groomer dog cat sander cutter cut $4.99 |
|
|
1/4″ Shank 3/4″ Cutter Diameter Cleaning Bottom Bit $6.97 |
|
|
Woodworker Wood Hole Cutter 26mm Dia Hinge Boring Bit $5.95 |
|
|
Woodworking Tool 1/2″ Shank Core Box Router Bit Cutter $8.34 |
|
|
Ammco 2109 Tool Bit Package Cutter $12.00 |
|
|
4 GREENLEE METAL CUTTERS – 6 STEEL BITS-3 METAL PUNCHES $36.99 |
|
|
Pro 7 Pcs Forstner Drill Bit Set Case 1/4-1″ Bit Holes Saw Smooth Cutting Cutter $14.29 |
|
|
FIVE FISCH TENON PLUG CUTTERS TOOL BITS DRILL 3/8″ 1/2″ 5/8″ 3/4″ 1″ SHANK 1/2″ $47.57 |
|
|
Twist Drill Bit 22mm Diameter Cutter Bimetal Hole Saw $5.17 |
|
|
Twist Drill Bit 3 Flat Shank 28mm Hole Saw Metal Cutter $5.22 |
|
|
.375 .250 *QTY 50* endmill Carbide New Router bit tool saw Solid Cutter 3/8x 1/4 $75.99 |
|
|
1 3/8″ Hole Saw Cutter Drill Bit Tool for Electricians $7.13 |
|
|
New Relton SRB-11 11/16″ X 12 Rebar Cutter Bit SDS+ $16.99 |
|
|
AMANA 55510 ShimFree Slot Cutter Router Bit 1/4-1/2 NEW $106.70 |
|
|
Lumber Wood Cutter 13 Pcs Twist Drill Bit Hole Saw Tool $30.66 |
|
|
DEWALT DW5860 NA 1-5/16 x 18 x 22-1/2 4 Cutter SDS Max Rotary Hammer Bit $75.95 |
|
|
MACHINIST TOOLS LATHE MILL LOT OF Lathe Cutting Cutters Tools Bits $39.65 |
|
|
1-3/4″ FLY CUTTER w/ 5/8″ SHANK & CARBIDE TIPPED TOOL BITS $6.02 |
|
|
Metal Twist Drill Bit 30mm Hole Saw Cutter w Hex Wrench $6.74 |
|
|
DeWalt DW5732 1-1/2″ x 17″ x 22″ 2-Cutter Spline Shank Rotary Hammer Bit $50.00 |
|
|
Twist Drill Bit 3 Flat Shank 28mm Hole Saw Metal Cutter $5.09 |
|
|
Twist Drill Bit 24mm Dia Hole Saw Metal Plate Cutter $5.70 |
|
|
Sharp 19mm Hole Saw Cutter Twist Drill Bit Hex Wrench $5.68 |
|
|
1/4″ x 1/4″ Double Flute Straight Router Bit Cutter New $4.87 |
|
|
TOUCHTEST 2 PIECE ROMAN OGEE BIT SET & 2 PIECE SLOT CUTTER BIT SET $9.99 |
|
|
5 Pcs Twist Drill Bit Hole Saw Set Cutter for Woodwork $23.22 |
|
|
53mm Cutting Dia Twist Bit Metal Plate Hole Saw Cutter $7.63 |
|
|
Metal Hex Wrench Hole Saw Cutter Drill Bit Tool 75mm $14.89 |
|
|
New 16 PCS Forstner Drill Bits Wood Drillings Bits Hole Saw Cutter FREE SHIPPING $32.89 |
|
|
3-1/4″ FLY CUTTER w/ 3/4″ SHANK & CARBIDE TIPPED TOOL BITS $3.20 |
|
|
80mm Cutting Diameter Triangle Shank Iron Cutter Twist Dill Bit Hole Saw $23.20 |
|
|
Hex Wrenches Twist Drill Bit 28MM Hole Saw Cutter Tool $7.33 |
|
|
Twist Drill Bit 150mm Diameter Cutter Bimetal Hole Saw $34.67 |
|
|
Tile Ceramics Drill Bit Silver Tone 6.5mm Glass Cutter $4.78 |
|
|
New 16 PCS Forstner Drill Bits Wood Drillings Bits Hole Saw Cutter FREE SHIPPING $32.89 |
|
|
Twist Drill Bit 3 Flat Shank 38mm Hole Saw Metal Cutter $6.96 |
|
|
Carpenter Hex Shaft 10mm Dia Auger Drilling Bit Cutter $6.31 |
|
|
15PC CARBIDE TIP TIPPED ROUTER BIT CUTTER TOOL SET KIT $49.99 |
|
|
NEW 1/4n Window/door Cutter Dewalt Ea. Spiral Cut-Out Bits DW6609 $14.00 |
|
|
Twist Drill Bit 16mm Dia Hole Saw Metalic Plate Cutter $5.47 |
|
|
53mm Twist Drill Bit Hole Cutter Saw Kit w Hex Wrench $12.77 |
|
|
Twist Drill Bit Bimetal 20.5mm Diameter Cutter Hole Saw $5.10 |
|
|
Metal Hex Wrench Hole Saw Cutter Drill Bit Tool 75mm $18.45 |
|
|
Sharp Tipped Hole Saw Bit Glass Marble Cutter Tool 25mm $5.45 |
|
|
85mm Diameter Silver Tone Marble Hole Saw Cutter Bit $15.73 |
|
|
Professional Metal Twist Dirll Bit Hole Saw Cutter 35mm $7.88 |
|
|
35mm Hole Saw Cutter Drill Bit Tool Kit for Metal Steel $7.94 |
|
|
Sharp 19mm Hole Saw Cutter Twist Drill Bit Hex Wrench $5.08 |
|
|
Alloy Cutter Hole Saw Drill Bit 20.5mm Cutting Diameter $4.46 |
|
|
TOTES modern MULTI-TOOL WITH BITS knife Pliers Cutter Fish Scaler $9.00 |
|
|
6mm Twist Drilling Bit 90mm Dia Bimetal Hole Saw Cutter $20.68 |
|
|
Wood Sharp Cutter Two Flute Straight Bits 1/4″ x 1/2″ $3.71 |
|
|
1/2″ X 3/4″ Open End Carving Cutter Router Bit Tool $5.87 |
|
|
Carbide Tipped Pilot Bit 30mm Dia Hole Saw Alloy Cutter $9.58 |
|
|
Milwaukee Big Hawg Pilot Bit For Hole Cutters 48271401 $7.99 |
|
|
Sharp Tipped Hole Saw Bit Glass Marble Cutter Tool 25mm $5.78 |
|
|
Spot Weld Cutter Drill Bits HSS 10) 5/16 inch USA $25.00 |
|
|
Sharp 5/8″ Diameter Cutting 1/4″ Shank V Type Router Cutter Bit $5.44 |
|
|
1/2″ x 3/8″ V Type Engraving Slotting Cutter Router Bit $4.51 |
|
|
Silver Tone Tile Ceramics Cutter 8mm Glass Drill Bit $4.80 |
|
|
25mm Marble Block Core Hole Saw Cutter Tool Drill Bit $5.31 |
|
|
Sharp V Type Slotting Cutter Bit Set Tool 1/2″ x 3/4″ $5.57 |
|
|
Glass Cutting Drill Bit Set Tile Ceramic Cutter 12mm $6.18 |
|
|
Wood Open End Carving Bit Cutting Cutter Tool 1/2″ x 1″ $6.59 |
|
|
1/4″ X 1″ Open End Carving Cutter Router Bit Set Tool $5.78 |
|
|
High Sierra Multi Tool Pliers Nine Driver Bit Screwdriver Wire Cutter Hand Tools $39.00 |
|
|
Lot of 2 EXPANSIVE Expanding DRILL BITS Greenley No 4 USA other has 3 cutters $20.00 |
|
|
5/8 PLUG & DOWEL Cutter Drill bit Fisch Austria hollow round rod woodwork tool $23.00 |
|
|
Undetachable Drill Bit Inside Alloy 22.5mm Diameter Hole Saw Cutter Kit $8.23 |
|
|
6mm Dia Twist Drill Bit Hex Wrench 35mm Hole Saw Iron Cutter $13.56 |
|
|
85mm Dia Hole Saw Drill Bit Cutter for Glass Ceramic Tile $12.16 |
|
|
Twist Drill Bit 110mm Dia Hole Saw Wood Iron Cutter New $21.83 |
|
|
Hole Saw Cutting Cutter Bit Tool Glass 24mm Standard $5.05 |
|
|
Sharp 30MM How Saw Cutter Twist Drill Bit Hex Wrenches $7.57 |
|
|
Stainless Steel 3/4 Cutter Head Straight Shank Core Box Router Bit $4.96 |
|
|
Metal 1/2″ x 5/16″ V Type Slotting Cutter Router Bit $4.98 |
|
|
Twist Drill Bit 24mm Dia Hole Saw Metal Plate Cutter $5.73 |
|
|
Lumber Wood Cutter 13 Pcs Twist Drill Bit Hole Saw Tool $30.65 |
|
|
Single Flute Straight Router Bit Cutter 1/4″ x 3/16″ $4.57 |
|
|
Milwaukee 48-20-7377 1/2″ X 16″ X 18″ SDS Plus MX4 4 Cutter Carbide Bit $45.64 |
|
|
Ceramics Cutting Drill Bit Set 4mm Glass Tile Cutter $4.13 |
|
|
Wood Cutter Hex Shaft Threaded Tip 14mm Auger Drill Bit $8.11 |
|
|
30MM Twist Drill Bit Hex Wrench Steel Hole Cutter Saw $11.42 |
|
|
Hex Wrench 40mm HSS Hole Saw Cutter Drill Bit Tool $8.96 |
|
|
Wood Open End Carving Cutting Cutter Bit Tool 1/4 x 7/8 $5.49 |
|
|
Twist Drill Bit 16mm Dia Hole Saw Metalic Plate Cutter $5.01 |
|
|
1/2″ x 3/8″ V Type Metal Slotting Cutter Router Bit $4.84 |
|
|
6mm Dia Twist Drill Bit Hex Wrench 35mm Hole Saw Iron Cutter $14.05 |
|
|
Pasco 3256 3 Cutter Bit Blade Only $8.42 Pasco 3256 3″ Cutter Bit Blade OnlyPasco 3256 3″ Cutter Bit Blade Only Features: Works On: ABS DWV, PVC DWV, PVC PRESSURE, CPVC, RIGID PVC ELECTRIC CONDUCT 3″ Cutter Blade For “Ram Bit” cutting tool Blade only |
|
|
Pasco 3262 4 Cutter Bit Blade Only $10.21 Pasco 3262 4″ Cutter Bit Blade OnlyPasco 3262 4″ Cutter Bit Blade Only Features: Works On: ABS DWV, PVC DWV, PVC PRESSURE, CPVC, RIGID PVC ELECTRIC CONDUCT 4″ Cutter Blade For “Ram Bit” cutting tool Blade only |
|
|
Dremel 562 Tile Cutter Bit $40.95 Dremel 562 Tile Cutter Bit Dremel 562 Tile Cutter Bit Features: A high-speed cutter mounted on a 1/8″ steel shank Ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes You can also create decorative wall tile by cutting a design, such as a sailboat, and filling it with colored grout For use with Single-Speed MultiPro Rotary Tool #275 (2561-4231), Two-Speed MultiPro Rotary Tool Kit #2850-02, Variable-Speed MultiPro Rotary Tool #395 (2615-3726), Digital Rotary Tool #398 (2561-4405), MiniMite Cordless Rotary Tool #750 (2561-4249), Cordless MultiPro Rotary Tool Kit #7700 (2561-4421) and Cordless MultiPro Rotary Tool Kit #7800-02 Attachment needed with this bit is the Tile Cutting Kit #566 (2713-4006) 1/8″ Carded |
|
|
Deburring Bit Cutter Blades $22.86 Deburring Bit Cutter Blades |
|
|
Dremel 561 Multi Purpose Cutter Bit $13.28 Dremel 561 Multi Purpose Cutter Bit Dremel 561 Multi Purpose Cutter Bit Features: A high-speed cutter with a 1/8″ steel shank Ideal for cutting wood, plastic, fiberglass, drywall, laminate, aluminum, and vinyl siding in a variety of applications, such as preparing an area for light fixtures or making cutouts in cabinets and paneling For use with Single-Speed MultiPro Rotary Tool #275 (2561-4231), Two-Speed MultiPro Rotary Tool Kit #2850-02, Variable-Speed MultiPro Rotary Tool #395 (2615-3726), Digital Rotary Tool #398 (2561-4405), MiniMite Cordless Rotary Tool #750 (2561-4249), Cordless MultiPro Rotary Tool Kit #7700 (2561-4421) and Cordless MultiPro Rotary Tool Kit #7800-02 Attachment needed with this bit: Multipurpose Cutting Kit #565 (2615-4104) Uses 1/8″ collet #480 (2615-4112) 1/8″ Carded |
|
|
Dremel 9931 Structured Tooth Cutter Bit $44.85 Dremel 9931 Structured Tooth Cutter Bit Dremel 9931 Structured Tooth Cutter Bit Features: A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds Ideal for fast material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard, soft metals, and ceramic wall tile For use with Single-Speed MultiPro Rotary Tool #275 (2561-4231), Two-Speed MultiPro Rotary Tool Kit #2850-02, Variable-Speed MultiPro Rotary Tool #395 (2615-3726), Digital Rotary Tool #398 (2561-4405), MiniMite Cordless Rotary Tool #750 (2561-4249), Cordless MultiPro Rotary Tool Kit #7700 (2561-4421) and Cordless MultiPro Rotary Tool Kit #7800-02 Use 1/8″ collets #480 (2615-4112) and #585 1/4″ tip width 1/8″ shank 1/8″ Carded |
|
|
Dremel 9935 Structured Tooth Cutter Bit $8.95 Dremel 9935 Structured Tooth Cutter Bit Dremel 9935 Structured Tooth Cutter Bit Features: A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds Ideal for fast material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard, soft metals, and ceramic tile For curved surfaces For use with Single-Speed MultiPro Rotary Tool #275 (2561-4231), Two-Speed MultiPro Rotary Tool Kit #2850-02, Variable-Speed MultiPro Rotary Tool #395 (2615-3726), Digital Rotary Tool #398 (2561-4405), MiniMite Cordless Rotary Tool #750 (2561-4249), Cordless MultiPro Rotary Tool Kit #7700 (2561-4421) and Cordless MultiPro Rotary Tool Kit #7800-02 Use 1/8″ collets #480 (2615-4112) and #585 5/16″ tip width 1/8″ shank 1/8″ Carded |
|
|
Cutter tool $539.99 Intermec – Cutter tool – for Intermec PD41 PD41A EasyCoder PD41 |
|
|
Cable cutter/stripper tool $31.99 Steren – Cable cutter/stripper tool |
|
|
3-Blade Cutter Bit Replacement Blades $15.48 3-Blade Cutter Bit Replacement Blades |
|
|
cable cutter/stripper tool $13.99 C2G – Cable cutter/stripper tool – red |
|
|
Tool & Cutter Wheels, Plate Mounted $54.34 Tool & Cutter Wheels, Plate Mounted |
|
|
Precision Stripper and Cutter – Cable cutter/stripper tool $31.99 Steren Precision Stripper and Cutter – Cable cutter/stripper tool |
|
|
K Tool International 4 Piece Pneumatic Bit Set in a Pouch. Each $52.23 Manufacturer: K Tool International. Each. Features and Benefits: Includes panel cutter, cold chisel, hammer bit and scraper Complete with storage pouch Made in the U.S.A. Customers also search for: Discount K Tool International 4 Piece Pneumatic Bit Set |
|
|
4-Piece Plug Cutter Drill Bit Sets $31.34 4-Piece Plug Cutter Drill Bit Sets |
|
|
Coaxial Cable Cutter-Stripper – cable cutter/stripper tool $46.99 Steren Coaxial Cable Cutter-Stripper – Cable cutter/stripper tool |