Coolant Fed
April 14th, 2011
Duramax Water Pump Replacement?
Alright, I’ve broken down and started saving up for the water pump and labor on it. It is leaking from the gasket around the water pump cover. It’s not coming from the intake manifold gasket because there isn’t any sign of leaks above the water pump. I’ve decided since you have to pull the water pump to replace the gasket and drain all the coolant, it’s best to go ahead and buy all new coolant, pump, and gasket. Just for preventative maintenance reasons. Total for all parts is right around $200.
My question is just how difficult would it be for a DIY person to do this in the driveway? It is an 05 GMC Duramax and I’m really getting fed up with the coolant spots all over the driveway. I can do pretty basic wrenching, so what would I be looking at timewise.
Would it be best to leave it to an ASE mechanic with a fully equipped shop? About what would I be looking at turnaround time and price for that?
Any information on replacing a DURAMAX water pump would be great!
It’s been a while since I’ve done one, but they are a bit of a bugger. GM warranty time is around 3 hours, so regular flat rate time would be 4 to 4 1/2.
If memory serves me the harmonic balancer has to come off to do this, you’ll have to block the flywheel so it can’t turn, as I’m guessing you aren’t going to be using air tools to remove the bolts.
Also, maybe think about replacing the hoses while you are at it, especially that little short one off the pump to the engine.
KoolBlast Coolant Fed End Mill Holders_ Steel.wmv
|
|
3/8″ BORING BAR CCMT 21.5 COOLANT FED 4-1/4″ OAL CARBIDE INSERTS $29.95 |
|
|
NEW!! 3 KENNAMETAL COOLANT FED DRILLS – 1/2″ $12.50 |
|
|
Carr .5030″ Coolant Fed Gun Drill $64.99 |
|
|
Carr .4045″ Coolant Fed Gun Drill $64.99 |
|
|
(2) Carr .4771″ Coolant Fed Gun Drills $99.99 |
|
|
(2) Carr .362″ Coolant Fed Gun Drills $99.99 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED 4 FLUTE COOLANT FED STEP REAMER. $35.00 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED 4 FLUTE COOLANT FED STEP REAMER. $36.00 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED 6 FLUTE COOLANT FED STEP REAMER. $36.00 |
|
|
Drill Masters Cemented Carbide 12 MM (.4724)” Coolant Fed Gun Drill Bit 11″ OAL $9.99 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED 4 FLUTE COOLANT FED STEP REAMER. $36.00 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED 4 FLUTE COOLANT FED STEP REAMER. $36.00 |
|
|
STARCUT SOLID CARBIDE TIPPED COOLANT FED – 2 FLUTE DRILL REAMER $35.00 |
|
|
PRECISION DRILL & REAMER SOLID STEP CARBIDE TIPPED 4 FLUTE COOLANT FED REAMER. $35.00 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED 6 FLUTE COOLANT FED STEP REAMER. $36.00 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED 4 FLUTE COOLANT FED STEP REAMER. $36.00 |
|
|
PRECISION DRILL & REAMER SOLID STEP CARBIDE TIPPED 4 FLUTE COOLANT FED REAMER. $36.00 |
|
|
PRECISION DRILL & REAMER SOLID CARBIDE TIPPED STEP 4 FLUTE COOLANT FED REAMER. $36.00 |
|
|
Cleveland C10755 23/32″ x 6-3/16″ x 9-1/2″ HSS HP SS Coolant Fed Low Helix Drill $227.99 |
|
|
KENNAMETAL HERTEL 40mm (1.575″) COOLANT FED INSERT DRILL #3.72400R132 $215.00 |
|
|
KENNAMETAL 1.125″ COOLANT FED INSERT DRILL #KIND11250285 (OLD PART #) $199.00 |
|
|
21 mm TCT Coolant Fed TiN Coated Drill Mitsubishi 1pc $29.95 |
|
|
TURCHAN THRILLER SOLID CARBIDE 7/16-14 UNC COOLANT FED 2 FL THREAD MILL DRILL $124.95 |
|
|
SANDVIK COROMANT 35mm 0.875″ COOLANT FED INSERT DRILL $125.00 |
|
|
SANDVIK COROMANT 2″ INDEXABLE COOLANT FED DRILL W/ 2″ SHANK – 416.1-0508-20-02 $149.00 |
|
|
SANDVIK COROMANT 2″ INDEXABLE COOLANT FED DRILL W/ 2″ SHANK – 416.1-0381-20-01 $109.00 |
|
|
HERTEL A06SCLPL2 3/8″ Coolant Fed A-SCLP Type Screw On Indexable Boring Bar H16 $44.95 |
|
|
5/16″ BORING BAR CCMT 21.5 W/ COOLANT FED NEW SCLCR5-2 $34.95 |
|
|
GUHRING .2188 (7/32) COOLANT FED DEEP HOLE DRILL $135.00 |
|
|
GUHRING .3438 (11/32″) COOLANT FED DEEP HOLE DRILL $145.00 |
|
|
11/64″ Carbide Gun Drill Coolant Fed Feeding bits .177″ $14.50 |
|
|
1-19/32 YG SPADE Drill bit Cutter TIP Tool Coolant Fed #3 SPLIT POINT S09312 $19.95 |
|
|
Sumitomo 1-5/32″ Carbide Tipped TIN Coated Coolant Fed Drill Bit German New $102.00 |
|
|
NEW GEORGE WHALLEY 21/32 COOLANT FED BIT $55.00 |
|
|
GUHRING RT 800 WP INDEXABLE INSERT DRILL COOLANT FED $99.99 |
|
|
KENNAMETAL Carbide Coolant Fed Drill 3/4″ KC7315 (Z27) $150.00 |
|
|
NEW MAPAL SINGLE BLADED REAMER COOLANT FED 14.003 MM 260 MM LONG 13MM SHANK $75.00 |
|
|
NEW MAPAL SINGLE BLADED REAMER COOLANT FED 14.003 MM 260 MM LONG 13MM SHANK $67.50 |
|
|
USED MAPAL SINGLE BLADED REAMER COOLANT FED 14.003 MM 260 MM LONG NO BLADE $29.99 |
|
|
MAPAL SINGLE BLADED REAMER COOLANT FED 14.003 MM 260 MM LONG 13MM SHANK $37.50 |
|
|
Guhring 10.5mm Carbide Coolant Fed Straight Flute Extra Long Drill/Reamer (#310) $34.99 |
|
|
GUHRING 12MM DIAMETER SOLID CARBIDE COOLANT FED DRILL 4 3/4″ LONG C2-161801 $24.99 |
|
|
PRESSURE FED COOLANT BURNISHING 5 MM 90MM LONG DRILL 2 FLUTE STRAIGHT $10.99 |
|
|
MA Ford Twister carbide 8X coolant fed drill 1/4 dia. $24.00 |
|
|
3/8″ CARBIDE BORING BAR CCMT 21.5 LOC 2-1/2″ COOLANT FED CARBIDE INSERTS 1/26/12 $59.95 |
|
|
3/8″ CARBIDE BORING BAR CCMT 21.5 LOC 4-3/4″ COOLANT FED CARBIDE INSERTS 1/26/12 $69.95 |
|
|
3/8″ BORING BAR CCMT 21.5 COOLANT FED OAL 4″ CARBIDE INSERTS 12/27/11 $44.95 |
|
|
1-15/32″ #5 MORSE TAPER SHANK DRILL COOLANT FED USED $24.95 |
|
|
MAPAL SINGLE BLADED REAMER COOLANT FED 14.003 MM 75 MM LONG 27MM SHANK $30.00 |
|
|
UNUSED! GENUINE STARCUT COOLANT FED STEP DRILL 12MM, 16MM, 17MM W/ 20MM SHANK $35.99 |
|
|
NEW SUMITOMO CARBIDE TIPPED COOLANT FED DRILL 14.50MM KDS .5709″ Tin Coated $89.45 |
|
|
INDEXABLE 2″ x 2″ COOLANT FED 12 INSERT 3 FL END MILL $319.73 |
|
|
3 PCS SET BORING BARS 3/8″ – 1/2″ – 5/8″ W/ COOLANT FED $79.95 |
|
|
5/16″ BORING BAR CCMT 21.5 COOLANT FED 4″ OAL CARBIDE INSERTS $29.95 |
|
|
AMEC ASC-320 .2969″ x 5/16″ x 1-5/8″ x 3-1/16″ 2F 140 deg Carb Coolant Fed Drill $144.99 |
|
|
Iscar 3200590 DCM Series Coolant Fed Indexable Drill 0.748″ – 0.783″ Range NEW $212.50 |
|
|
KUB Trigon 1.109″ Coolant Fed Indexable Drill Bit New $127.50 |
|
|
KENNAMETAL BURNISHING DRILL CARBIDE Y9-0032 COOLANT FED $24.99 |
|
|
1″ CARBIDE BORING BAR CNMG 43 OAL 4-1/2″ LEFT HAND COOLANT FED CARBIDE INSERTS $119.95 |
|
|
Kennametal 12.654 + or – 0.013 Solid Carbide Coolant Fed Chucking Reamer $100.00 |
|
|
Kennametal 1095901, 5/8″, Coolant Fed Indexable Boring Bar $100.00 |
|
|
1-11/32″ Twist Drill bit Straight shank 11″ LONG Coolant Fed Feeding spindle $22.50 |
|
|
Ingersoll Drill-Max 1-1/4″ Coolant-Fed Insert Drill (Regrind) $129.99 |
|
|
51/64″ Step Pilot chamfer cut Drill bit Fed Coolant Feeding “LONG” 13/16″ $14.55 |
|
|
Drill bit 31/32″ Coolant fed Feeding USA Screw Machine $14.50 |
|
|
YG-1 DH408119 11.9 Carbide TiAlN Coolant Fed Drill Bit J1 $79.95 |
|
|
PAIR OF HS BLACK OXIDE COATED COOLANT/OIL FED DRILLS $150.00 |
|
|
M.A, Ford Twister HP 208 Series 5x Coolant Fed Drill 7/16 TiN Coated $189.99 |
|
|
NICE! 1-1/8″ Indexable Coolant Fed Drill Bit 4″ Drilling Depth $85.00 |
|
|
YG-1 DH406115 11.5mm Carbide TiAlN Coolant Fed Drill Bit J20 $79.95 |
|
|
LOT OF CARBIDE TIPPED COOLANT FED GUN DRILLS $240.00 |
|
|
ISCAR SOLID CARBIDE 10.25MM COOLANT FED DRILL $25.00 |
|
|
9MM COOLANT FED CARBIDE DRILL METAL REMOVAL SPL PT. (C-1-5-1-A-FR123-VS) $83.02 |
|
|
SANDVIK LAG 123D020 12B BORING BAR 3/4″ SHANK COOLANT FED THRU MACHINIST TOOLS $89.99 |
|
|
GUHRING INDEXABLE INSERT DRILL 5243 SERIES COOLANT FED $149.99 |
|
|
COOLANT FED DRILL BIT 25/32 WHALLEY USA THREADED $19.50 |
|
|
SANDVIK COROMANT 1 1/4″ COOLANT-FED INSERT DRILL $275.00 |
|
|
Madison Duodex 4mm x 12.700″ #1254-705-04780 Taper Shank Coolant Fed Spade Drill $642.99 |
|
|
1/4″ CARBIDE BORING BAR CCMT 21.5 OAL 2-1/2″ COOLANT FED CARBIDE INSERTS $59.95 |
|
|
1/4″ CARBIDE BORING BAR CCMT 21.5 OAL 6-1/2″ COOLANT FED CARBIDE INSERTS $69.95 |
|
|
1/4″ CARBIDE BORING BAR CCMT 21.5 LOC 5-7/8″ COOLANT FED CARBIDE INSERTS 3/1/12 $59.95 |
|
|
1/4″ CARBIDE BORING BAR CCMT 21.5 LOC 6-1/8″ COOLANT FED CARBIDE INSERTS 3/1/12 $59.95 |
|
|
1-7/32 YG SPADE Drill bit Cutter TIP Tool Coolant Fed #2 TIN COATED SPLIT POINT $14.88 |
|
|
Carr .50″ Coolant Fed Reamer $64.99 |
|
|
MADISON H-114-S COOLANT FED INDEXABLE SPADE DRILL HOLDER 2 FLUTES USA $69.95 |
|
|
INGERSOLL DRILL-MAX 1 1/4″ COOLANT-FED INSERT DRILL $178.00 |
|
|
SPI #4 – 1/2 NON COOLANT FED SIZE: 200 TAPPING HEAD $215.34 |
|
|
Titex Tools A3985 18.5mm Alpha VHM 2F Coolant Fed Carbide TiN Drill $168.62 |
|
|
3/4 x 7/8 x 1″ Solid Carbide Coolant Fed Step Drill New $68.00 |
|
|
5/16″Coolant Fed Straight Shank 2 Flute Carbide Gun Drill $19.99 |
|
|
SANDVIK COROMANT 3/4″ COOLANT-FED INSERT DRILL $85.00 |
|
|
57/64″ Drill bit CARBIDE TIP DIJET Coolant Fed Feeding $31.55 |
|
|
5/16″ CARBIDE BORING COOLANT FED CARBIDE INSERTS (#)(*) $42.95 |
|
|
SOLID CARBIDE COOLANT FED STEP DRILL 10.3MM X 14.3MM $59.95 |
|
|
27/64 COOLANT FED CARBIDE DRILL BY METAL REMOVAL (D-1-4-6-A-VS) $136.96 |
|
|
National Carbide Spade Drill Holder 5″ – Coolant Fed – 86-400-2298NC $79.99 |
|
|
2″ x 1-1/4″ HSS 6 Flute RH Coolant Fed End Mill, R$118 $73.72 |
|
|
25/64″ Carbide Gun Drill Fed coolant Feeding Bit .388″ $19.95 |
|
|
Madison 1230-505-04780 1-7/8″ Coolant Fed Spade Drill $125.99 |
|
|
Madison 1230-705-04780 1.937″ Coolant Fed Spade Drill $125.99 |
|
|
Fed $4.49 Fed |
|
|
Coolant Fluids $20.3 Coolant Fluids |
|
|
Fed-Upper $10 Fed-Upper – Bounty Killer |
|
|
Fed Up $10 Fed Up – Too $hort |
|
|
Fed Bound $6 Fed Bound – Ace Hood |
|
|
Fed up! $10 Fed up! – Simon’s Sister’s Dog |
|
|
Pump-coolant $184.1 Pricing subject to change. Pump-coolant |
|
|
Interdynamics COOLANT UV DYE $4.28 Interdynamics COOLANT UV DYE |
|
|
Fed to the Dogs $2.49 Fed to the Dogs Vinyl Sticker White background with red and black. |
|
|
Texas Fed Texas Bred $11.49 Texas Fed Texas Bred |
|
|
Fed Through The Teeth Machine $9.49 Fed Through The Teeth Machine |
|
|
Have You Fed The Fish? $10.49 Have You Fed The Fish? |
|
|
Weapon R Coolant Tanks – Aluminum Coolant Tank [03-Up 350z] $85 Weapon R Coolant Tanks – Aluminum Coolant Tank |
|
|
Worth Goin FED Fo $6 Worth Goin FED Fo – Plies |
|
|
End The Fed $3.99 In the post-meltdown world, it is irresponsible, ineffective, and ultimately useless to have a serious economic debate without considering and challenging the role of the Federal Reserve. Most people think of the Fed as an indispensable institution without which the country’s economy could not properly function. But in END THE FED, Ron Paul draws on American history, economics, and fascinating stories from his own long political life to argue that the Fed is both corrupt and unconstitutional. It is inflating currency today at nearly a Weimar or Zimbabwe level, a practice that threatens to put us into an inflationary depression where $100 bills are worthless. What most people don’t realize is that the Fed — created by the Morgans and Rockefellers at a private club off the coast of Georgia — is actually working against their own personal interests. Congressman Paul’s urgent appeal to all citizens and officials tells us where we went wrong and what we need to do fix America’s economic policy for future generations. |
|
|
End the Fed $9.99 In the post-meltdown world, it is irresponsible, ineffective, and ultimately useless to have a serious economic debate without considering and challenging the role of the Federal Reserve. Most people think of the Fed as an indispensable institution without which the country’s economy could not properly function. But in END THE FED, Ron Paul draws on American history, economics, and fascinating stories from his own long political life to argue that the Fed is both corrupt and unconstitutional. It is inflating currency today at nearly a Weimar or Zimbabwe level, a practice that threatens to put us into an inflationary depression where $100 bills are worthless. What most people don’t realize is that the Fed — created by the Morgans and Rockefellers at a private club off the coast of Georgia — is actually working against their own personal interests. Congressman Paul’s urgent appeal to all citizens and officials tells us where we went wrong and what we need to do fix America’s economic policy for future generations. |
|
|
A Term At The Fed $13.89 As a governor of the Federal Reserve Board from 1996 to 2002, Laurence H. Meyer helped make the economic policies that steered the United States through some of the wildest and most tumultuous times in its recent history. Now, in A Term at the Fed , Governor Meyer provides an insider’s view of the Fed, the decisions that affected both the U.S. and world economies, and the challenges inherent in using monetary policy to guide the economy. When Governor Meyer was appointed by President Clinton to serve on the Federal Reserve Board of Governors in 1996, the United States was entering one of the most prosperous periods in its history. It was the time of "irrational exuberance" and the fabled New Economy. Soon, however, the economy was tested by the Asian financial crisis, the Russian default and devaluation, the collapse of Long-Term Capital Management, the bursting of America’s stock bubble, and the terrorist attacks of 9/11. In what amounts to a definitive playbook of monetary policy, Meyer now relives the Fed’s closed-door debates — debates that questioned how monetary policy should adapt to the possibility of a New Economy, how the Fed should respond to soaring equity prices, and whether the Fed should broker the controversial private sector bailout of LTCM, among other issues. Meyer deftly weaves these issues with firsthand stories about the personalities involved, from Fed Chairman Alan Greenspan to the various staffers, governors, politicians, and reporters that populate the world of the Fed. Since the end of his term, Meyer has continued to watch the Fed and the world economy. He believes that we are witnessing a repetition of some of the events of the remarkable 1990s — including a further acceleration in productivity and perhaps another bull market. History does not repeat itself, yet Meyer shows us how the lessons learned yesterday may help the Fed shape policy today. |