Coolant Drill
May 31st, 2011
Global Warming Theory ?
Do you think by drilling the “Oil” out from the Earth could be apart of the Gobal Warming,not so much how we use the oil which is also a big part as we all know. I would think that Oil provides a “Coolant” for the Earths core and from the sun. The oil in the earth is there for a reason. Can the Earth “Run” without Oil or will its Engine blow?
Honestly, I think the Earth is just going through another phase. What they aren’t telling us is how active the Sun has been becoming over the past few years. Their are record solar flares and explosions taking place on the face of the Sun. I think the Earth has just been slowly warming up and melting since the ice age. If one major volcano was to erupt, it would put more stuff in the air than humans could for a thousand years. I think global warming is a ploy used by politicians to tax companies and put up new laws which in turn will create more revenue. Why don’t we ask Al Gore what his power bill was last month in his mansion…..?
Flood Coolant for a Drill Press
|
|
Sandvik A416.1-803-M-1 indexable insert coolant drill $250.00 |
|
|
Carboloy 31 QDR-06 insert coolant drill, 1 15/16″ $250.00 |
|
|
Sandvik 1 3/16″? indexable insert coolant drill $250.00 |
|
|
Carboloy 22 QDR-05, 1 3/8″? insert coolant drill $200.00 |
|
|
new ptd 1/4″ solid carbide spot drill. $7.99 |
|
|
Komet KUB Trigon 1 3/16″ indexable insert coolant drill $200.00 |
|
|
Ingersoll Q0476143N7R01 Quad Indexable Drill 3206488 Coolant 1.875″ x 1.50″ $510.99 |
|
|
Kennametal SE Drill HP SC Dyna-Point B225A18000 w/coolant Metric 18mm CS5 $375.00 |
|
|
2-9/16 2-5/8″ Carbide Indexable Inserts Drill Bit Ingersoll Drill Max 17″ Long $218.00 |
|
|
MITSUBISHI 8.5mm CARBIDE TIPPED COOLANT DRILL 2FL $69.29 |
|
|
* 1 New 63/64″ (.9844″) COOLANT THRU Oil Hole HSS DRILL 118` #54963 USA $69.99 |
|
|
VALENITE-VAL TURN ProGRIP BORING BAR A40W DCLNR5 $279.00 |
|
|
VALENITE-VAL TURN ProGRIP BORING BAR A32W DCLNL5 $269.00 |
|
|
NEW 8 mm hollow Drill Bit Carbide Tip QTY 1 Hollow for coolant flow USA New $41.00 |
|
|
Mitsubishi Materials PP15TF MZS0800LB 2FL Solid Carbide Coolant Fed Drill NEW $106.25 |
|
|
VALENITE-VAL TURN ProGRIP BORING BAR A32W DDUNL4 $289.00 |
|
|
VALENITE-VAL TURN ProGRIP BORING BAR A20U-DCLNL3 $189.00 |
|
|
(4) Koolcarb 7.5mm Coolant Feeding Carbide tipped Drill $199.00 |
|
|
Guhring Spiral Bohrer (6) $99.00 |
|
|
Cleveland Twist Drill (2) $24.99 |
|
|
Controx 234059 (2) EDP 234059 1/2 4 Flute Fine Rougher $65.00 |
|
|
34/64″ Taper Length Oil Hole Drill $120.00 |
|
|
6.5mm Mitsubishi Carbide Coolant Thru AP15TF Coated Drill (#387) $17.99 |
|
|
NIKKEN BT50 FLOTATING TAP HOLDER Z-24 $60.00 |
|
|
YMZ BT50 COLLET CHUCK HOLDER $60.00 |
|
|
INDEXABLE SPADE DRILL HOLDER w/ 4MT SHANK + BLADES $9.50 |
|
|
ACME INDEXABLE SPADE DRILL HOLDER w/ 3/4″ SHANK $26.36 |
|
|
INDEXABLE SPADE DRILL HOLDER w/ 3/4″ SHANK + BLADES $3.25 |
|
|
New YG1 Rotary Coolant Inducer for Spade Drill Holders 45/64 to 1-3/8″ cap 2-51 $34.50 |
|
|
Eldorado .6235 x 22″ Carbide Tipped Gun Drill $85.00 |
|
|
INDEXABLE SPADE DRILL HOLDER w/ 1″ SHANK + BLADES $9.50 |
|
|
INDEXABLE SPADE DRILL HOLDER w/ 1″ SHANK + BLADES $7.50 |
|
|
KOOLCARB 5/16 Carbide Tipped Coolant Feeding Drill, EDP 17003125 $88.64 |
|
|
KOOLTWIST Coolant Feeding Solid Carbide Drill #29302570 $79.74 |
|
|
9.53mm (3/8″) OSG FTO-GDN CARBIDE DRILL TiALN COAT COOLANT THRU (1 PC) DR05104 $56.91 |
|
|
new titex 22 mm(.866)coolant thru insert drill.1″ shank $69.99 |
|
|
resharpened & recoated carbide tipped drill.16.5 mm(.6496)5″ long.coolant thru. $24.99 |
|
|
Eldorado .6220 x 22″ Carbide Tipped Gun Drill $85.00 |
|
|
Crafters .6200 x 22″ Carbide Tipped Gun Drill $85.00 |
|
|
Eldorado .9150 x 22″ Carbide Tipped Gun Drill $100.00 |
|
|
Kennametal 2″ Drill Body Indexable Carbide Inserts DFT 06T308HP $114.50 |
|
|
Solid carbide coolant through 3 flute drill cnc mill $62.00 |
|
|
GUHRING 19 – 20 mm Drill Body Indexable and 19.05 mm 3/4″ Carbide Insert NEW $15.00 |
|
|
Kennametal 1-1/2 Drill Body Indexable Carbide Inserts DFT 06T308HP NEW $139.35 |
|
|
Guhring 33.3 mm HSS Coolant Drill w/ #6 Morse Taper $300.00 |
|
|
AMEC Drill Body with 21/32″ Spade Drill Blade Insert and 3 NEW 17/32″ 9/16″ 5/8″ $56.00 |
|
|
INDEXABLE SPADE DRILL HOLDER w/ 1-1/4″ SHANK + BLADES $3.25 |
|
|
Walter 1.0625 Drill Body Indexable Carbide Inserts P28475-3 NEW $48.00 |
|
|
AMEC Drill Body, 1″ Spade Drill Blade Insert $75.55 |
|
|
13/32″ solid carbide thru coolant taper length drill $50.00 |
|
|
17/32″ solid carbide thru coolant taper length drill $50.00 |
|
|
3/8″ solid carbide thru coolant taper length drill $50.00 |
|
|
5/8″ solid carbide thru coolant taper length drill $60.00 |
|
|
11/32″ solid carbide thru coolant taper length drill $50.00 |
|
|
Kennametal Indexable Drill, KSEM0531R10SS075 $15.00 |
|
|
NEW!! 3 KENNAMETAL COOLANT FED DRILLS – 1/2″ $4.00 |
|
|
Sumitomo KDS 61/64″ 09531 MAV Coolant Carbide Drill Bit Cutter. FREE SHIP $36.00 |
|
|
CARBIDE TIPPED DIE DRILL .4355″ COOLANT THRU XLONG USA $34.00 |
|
|
OIL HOLE COOLANT THRU DRILL .306 DOUBLE MARGIN NEW USA $28.00 |
|
|
NEW KOMET KUB Carbide INSERT Coolant DRILL ABS 50 .875” 04/.875/1.750R 7/8″ $244.25 |
|
|
Eldorado .1360 x 10″ Carbide Tipped Gun Drill $40.00 |
|
|
Eldarado .1720 x 10″ Carbide Tipped Gun Drill $45.00 |
|
|
Eldarado .1875 x 16″ Carbide Tipped Gun Drill $45.00 |
|
|
Eldarado .1875 x 10″ Carbide Tipped Gun Drill $45.00 |
|
|
Eldarado .1875 x 22″ Carbide Tipped Gun Drill $50.00 |
|
|
.1610 NYTD DRILL BITS COOLANT 2pcs WINSLOW SHANK $14.95 |
|
|
Eldarado .1933 x 10″ Carbide Tipped Gun Drill $45.00 |
|
|
Eldarado .1970 x 16″ Carbide Tipped Gun Drill $45.00 |
|
|
Eldorado .2130 x 7.5″ Carbide Tipped Gun Drill $50.00 |
|
|
Eldorado .2130 x 18″ Carbide Tipped Gun Drill $50.00 |
|
|
Eldorado .2187 x 15″ Carbide Tipped Gun Drill $50.00 |
|
|
Eldorado .2187 x 10″ Carbide Tipped Gun Drill $50.00 |
|
|
Eldorado .2187 x 22″ Carbide Tipped Gun Drill $55.00 |
|
|
M42 AIRCRAFT CORE DRILL .1605 X .1270px 4″ 22pcs RECONDITIONED $14.95 |
|
|
Eldorado 1.2500 x 84″ Carbide Tipped Gun Drill $225.00 |
|
|
Eldorado 1.2500 x 36″ Carbide Tipped Gun Drill $175.00 |
|
|
TITEX 1PC 3 MM 1PC 4.1 MM CARBIDE DRILL COOLANT THRU $49.99 |
|
|
Eldorado 1.1250 x 80″ Carbide Tipped Gun Drill $225.00 |
|
|
Eldorado 1.1250 x 74″ Carbide Tipped Gun Drill $225.00 |
|
|
Eldorado 1.1250 x 67″ Carbide Tipped Gun Drill $200.00 |
|
|
Eldorado 1.1200 x 48″ Carbide Tipped Gun Drill $150.00 |
|
|
Eldorado 1.2940 x 48″ Carbide Tipped Gun Drill $200.00 |
|
|
4 TIAIN 15MM SOLID CARBIDE COOLANT DRILLS,DHSS0019,NEW $4.24 |
|
|
VALENITE CARBIDE INSERT DRILL 1.062″ VWDL-106-125-472 $224.45 |
|
|
Eldorado 1.2950 x 28″ Carbide Tipped Gun Drill $175.00 |
|
|
Eldorado 1.4688 x 48″ Carbide Tipped Gun Drill $225.00 |
|
|
Eldorado 1.5000 x 36″ Carbide Tipped Gun Drill $200.00 |
|
|
Eldorado 1.1875 x 36″ Carbide Tipped Gun Drill $175.00 |
|
|
Eldorado 1.1875 x 48″ Carbide Tipped Gun Drill $175.00 |
|
|
Eldorado 1.0625 x 48″ Carbide Tipped Gun Drill $150.00 |
|
|
NEW CARBIDE STEP DRILL .631 X .4925 COOLANT 3-1/2″ OAL X 1-3/4″ FLUTE 373 $12.95 |
|
|
GUHRING Coolant Screw Machine Drill Holder 5242 18mm 18-18.05mm HSS [Z82] $95.00 |
|
|
SUMITOMO SOLID CARBIDE DRILL —- PART# MDS103MHV —- COOLANT THROUGH HOLES $55.00 |
|
|
LPS 02128 2® Industrial Strength Lubricant Container Size: 1 Gallon bottle $59.89 |
|
|
TRICO MD-1200 Micro-Drop® Dispenser Air Consumption: 1.7 CFM/line $630.75 |
|
|
MOBIL Mobilmet® S-122 Water Soluble Cutting Oil – Container Size: 5 Gallon $132.49 |
|
|
MOBIL 98095E Rarus® 427 Air Compressor Oil 5 Gallon Pail $139.99 |
|
|
KOOL MIST 560 PORTaMIST Set w/ 1 Gallon #77 & 1 sample #77 concentrated coolant $139.99 |
|
|
TRICO 30655 Portable DL Spray Unit $84.32 |
|
|
VALENITE VALGROOVE VG117 R 16-20 TURNING/GROOVING BAR $159.00 |
|
|
This Is Not A Drill $10.49 This Is Not A Drill |
|
|
Drill, The $7.49 Drill, The |
|
|
Coolant Fluids $20.3 Coolant Fluids |
|
|
Little Giant MCT-5P Machine Coolant Tank (560040) $162 Little Giant MCT-5P Machine Coolant Tank (560040) For use on single-spindle drill presses, bench mills, tool grinders, single-spindle tapping machines, cut off saws, small lathes using water soluble or light cutting oil. Includes all adapters and fittings for use with recommended pumps. Little Giant MCT-5P Machine Coolant Tank (560040) Features: 5 gallon polyethylene tank Metal chip collector basket Baffle 6′ plastic hose Plastic flex nozzle with brass control valve This unit does not include pump Applications: Flex Nozzle, Acetal Little Giant MCT-5P Machine Coolant Tank (560040) Specifications: Weight: 4 Height: 8 Width: 11 Length: 15.5 |
|
|
JET 320038 J-1600R, 7.5 HP, Radial Drill Press $50999 J-1600R, 7.5 HP, Radial Drill Press – 320038. Coolant Pump. Tool Kit. Box Table |
|
|
JET 320033 J-720R, 3HP, Radial Drill Press 230/460V $13899 J-720R, 3HP, Radial Drill Press 230/460V – 320033. Coolant Pump. Tool Kit. Box Table |
|
|
JET 320036 J-1230R, 5HP, Radial Drill Press 230V $27699 J-1230R, 5HP, Radial Drill Press 230V – 320036. Coolant Pump. Tool Kit. Box Table |
|
|
Universal Do-Drill 16 Oz. Do-Drill~ $15.99 Many of our gunsmith customers have told us this is the best product we’ve ever offered for tapping drilling and cutting all types of heat-treated steels moly and stainless. Excellent for chambering and boring jobs a coolant for lathe mill and shaper work – will speed production and reduce tool costs in your shop every day. Non-evaporating does not require stream application for 99% of the jobs it follows the tap or drill in the work. A moneysaver. We know of cases where all four holes for a mount have been drilled and tapped using DO-DRILL and the tap was still sharp enough for future use. With taps as high priced as they presently are you cannot afford NOT to Mfg: Brownells SPECS: Net Contents; 16 oz. (473ml) 1 gal. (3.8L) or 5 gal. (18.9L) Can be sent UPS. |
|
|
Pump-coolant $184.1 Pricing subject to change. Pump-coolant |
|
|
Interdynamics COOLANT UV DYE $4.28 Interdynamics COOLANT UV DYE |
|
|
DRILL $5.49 Pricing subject to change. DRILL |
|
|
Drill $127.34 Pricing subject to change. Drill |
|
|
Weapon R Coolant Tanks – Aluminum Coolant Tank [03-Up 350z] $85 Weapon R Coolant Tanks – Aluminum Coolant Tank |
|
|
JET 354210 JDP-20EVS/230, 20-in 2 HP 3-Phase 230V Variable Speed Drill Press $4799 20-in 2 HP 3-Phase 230V Variable Speed Drill Press – 354210. Integrated Tapping &, Reversing Controls. Complete Coolant System. T-Slotted Work Table |
|
|
JET 354212 JDP-20EVS/460, 20-in 2 HP 3-Phase 460V Variable Speed Drill Press $4799 20-in 2 HP 3-Phase 460V Variable Speed Drill Press – 354212. Integrated Tapping &, Reversing Controls. Complete Coolant System. T-Slotted Work Table |
|
|
Weapon R Coolant Tanks – Short Coolant Tank (18Oz) [Universal] $50 Weapon R Coolant Tanks – Short Coolant Tank (18Oz) |