Coated Carbide
April 7th, 2010
Which is tougher: carbide or titanium (for drill bits)?
I need to buy a toughd drill bit to drill out two broken bolts. I’ve been recommended to get either carbide or titanium. I’m not sure what sort of carbide (tungsten?) or titanium or titanium-coated steel? Do they make diamond drill bits for this sort of thing?
Cobalt bits from Sears.They also sell screw extactors that work in a drill.—–Tech. Tip: If it is a broken exhaust manifold stud ,use a small socket the size of the bolt and insert it in the stud hole and use it for a drill guide so you do not damage the threads.
TiN Coated Carbide.mov
|
|
W29 34130.0474 BK74 KOMET CARBIDE INSERTS CVD COATED (10PC) $69.99 |
|
|
10 PCS CCMT 2152 C5 TIN COATED CARBIDE INSERTS $18.90 |
|
|
100 PCS CCMT 2152 C5 TIN COATED CARBIDE INSERTS $189.95 |
|
|
6.5mm Mitsubishi Carbide Coolant Thru AP15TF Coated Drill (#387) $17.99 |
|
|
Carbide End Mill Lot Miniatures 100 Pcs ” Ball Ends” Coated Very Lightly Used $29.00 |
|
|
W29 24010.0469 BK69 KOMET CARBIDE INSERTS CVD COATED (19PCS) $113.99 |
|
|
MICRO 100 5mm 4 FLUTE AlTiN COATED CARBIDE METRIC END MILL HMRM-050-4X USA NEW $26.23 |
|
|
MICRO 100 4mm 4 FLUTE AlTiN COATED CARBIDE METRIC END MILL HMRM-040-4X USA NEW $24.90 |
|
|
MICRO 100 4mm 4 FLUTE AlTiN COATED CARBIDE METRIC END MILL HMUM-040-4X USA NEW $24.30 |
|
|
29/64 HELICAL POINT SOLID CARBIDE DRILL TIN COATED (C-1-7-2-FR150-VS) $97.13 |
|
|
BRAND NEW CNMG 431 120404 CM14 CVD coated Carbide Inserts (Box of 10 inserts) $33.40 |
|
|
BRAND NEW CNMG 432 120408 CM14 CVD coated Carbide Inserts (Box of 10 inserts) $33.40 |
|
|
BRAND NEW SNMG 431 120404 CM14 CVD coated Carbide Inserts (Box of 10 inserts) $33.40 |
|
|
new solid carbide 5/8 coated end mill.1/2 loc.6 flute..023 corner radius. $29.99 |
|
|
new solid carbide 5/8 coated end mill.9/16 loc.5 flute..023 corner radius. $29.99 |
|
|
new solid carbide 5/8 coated end mill.5/8 loc.4 flute..023 corner radius. $29.99 |
|
|
4 new solid carbide 1/2″ stubby duramill 3 flute coated end mills. $39.99 |
|
|
11 solid carbide resharpened & recoated 1/2 coated stubby end mills. $89.99 |
|
|
Solid Carbide Endmill End Mill Cutter 1″ x 6″ 4 fute TiALN Coated NEW $102.55 |
|
|
KEO 3/64″ X 1/4″ 3 FLUTE LONG CARBIDE END MILL Diamond Coated 85003-AD USA NEW $15.85 |
|
|
KEO .055″ 3 FL Extra Long Reach CARBIDE END MILL Diamond Coated 86054-AD USA NEW $18.77 |
|
|
Imported 3/4″ x 3/4″ x 1 1/2″ x 4″, 4 Flute, TiALN Coated Solid Carbide End Mill $110.00 |
|
|
Solid Carbide Endmill End Mill Cutter 3/4″ x 6″ 4 fute TiALN Coated NEW $76.00 |
|
|
Solid Carbide Endmill End Mill Cutter 1/2″ x 3″ 4 fute TiALN Coated NEW $12.50 |
|
|
Solid Carbide Endmill End Mill Cutter 3/8″ x 2-1/2″ 4 fute TiALN Coated NEW $10.00 |
|
|
K TOOL 900 GR-A1M CARBIDE INSERTS Tin Coated 9pc With Holder $119.00 |
|
|
1/4 carbide ball end mill 4 flutes dark coated $4.99 |
|
|
1/32″ BALL CARBIDE END MILL 4 FL COATED $3.99 |
|
|
Komet XW99 00020.93 44°45′ Grad TiCN Coated Carbide Inserts 10-pack $68.95 |
|
|
1 KEO 5/64″ 3 FLUTE LONG REACH BALL CARBIDE Diamond Coated END MILL 85064-AD NEW $24.25 |
|
|
1 KEO 3/32″ 3 FLUTE LONG REACH BALL CARBIDE Diamond Coated END MILL 85065-AD NEW $24.25 |
|
|
Komet XW99 00020.92 30° Grad TiCN Coated Carbide Inserts 10-pack $68.95 |
|
|
TPG 434 TIN COATED HARD-CUT CARBIDE INSERTS MIX 26 PCS $49.00 |
|
|
KEO 3/16″ 3 FL Extra Long Reach CARBIDE END MILL Diamond Coated 86065-AD USA NEW $30.53 |
|
|
1/16″ CARBIDE END MILL 4FL TITANIUM COATED $3.99 |
|
|
++1.00 x 6.00 OAL X 3″ LOC SOLID CARBIDE TIN COATED “USED BUT SHARP” $33.00 |
|
|
SCD 3.05mm 5D SOLID CARBIDE DRILL COATED (#716) $19.90 |
|
|
Carbide End Mills 1/2″ Diameter 4 Flute Tin Coated Very Lightly Used 9Pcs Total $16.15 |
|
|
Sandvik Carbide Endmill .375 dia.-6 flute-coated-New-2 pieces $24.75 |
|
|
ANC CARBIDE INSERTS CNMO 433A TNT TIN COATED $47.99 |
|
|
TMX ADKT 1505PDSR-MM NCM325 Carbide Inserts CVD Coated $45.18 |
|
|
APXT 1035PDSR-MM NCM325 Carbide Inserts CVD Coated $36.25 |
|
|
TMX APXT 1035PDSR-MM PC3500 Carbide Inserts PVD Coated $36.44 |
|
|
TMX APXT 1035PDSR-MM PC3545 Carbide Inserts PVD Coated $36.44 |
|
|
APXT 1035PDSR-MM PC8520 Coated Carbide Inserts $36.40 |
|
|
TMX CNMG 431-HM NC9020 Coated Carbide Inserts $20.50 |
|
|
TMX DNMA 432 NC315K Coated Carbide Inserts $24.70 |
|
|
TMX RNMG 64-B25 NC3030 Coated Carbide Inserts $41.30 |
|
|
SEKT 13T3AGSN-X155 PC3525 Carbide Inserts PVD Coated $28.40 |
|
|
TMX SNMG 432-HM NC3010 Coated Carbide Inserts $19.70 |
|
|
TMX SNMG 644-B25 NC3030 Carbide Inserts CVD Coated $41.80 |
|
|
TMX SNMG 866-GR NC3030 Coated Carbide Inserts $114.20 |
|
|
TMX SPKN 42EDR NCM325 Carbide Inserts CVD Coated $28.60 |
|
|
TMX SPKN 53EDR NCM325 Carbide Inserts CVD Coated $35.20 |
|
|
VNMG 331-VF NC3030 Coated Carbide Inserts $34.90 |
|
|
WNMG 331-HM NC3030 Coated Carbide Inserts $15.10 |
|
|
TMX WNMG 331-HM NC9020 Coated Carbide Inserts $17.00 |
|
|
WNMG 332-HM NC3015 Coated Carbide Inserts $15.00 |
|
|
WNMG 432-GR NC3030 Carbide Inserts CVD Coated $20.00 |
|
|
10 PCS CNMG 431 C5 TIN COATED CARBIDE INSERTS NEW $15.95 |
|
|
W29 18130.0479 BK79 KOMET CARBIDE INSERTS PVD COATED (14PC) $69.99 |
|
|
1/2″ 4-FLUTE CARBIDE END MILLS (10 PCS) TiALN COATED USA MADE 206-001207 $289.99 |
|
|
10-24 CARBIDE THREAD MILL – BRAND NEW – TiALN COATED $53.00 |
|
|
1″ inch ball end mill solid carbide 99% new TiAlN coated, SGS, 4 flute $132.83 |
|
|
10-28 CARBIDE THREAD MILL – BRAND NEW – TiALN COATED $53.00 |
|
|
1/4″-28 CARBIDE THREAD MILL – BRAND NEW – TiALN COATED $53.00 |
|
|
5/16″-24 CARBIDE THREAD MILL – BRAND NEW – TiALN COATED $62.50 |
|
|
3/8″-20 CARBIDE THREAD MILL – BRAND NEW – TiALN COATED $74.50 |
|
|
3/8″-24 CARBIDE THREAD MILL – BRAND NEW – TiALN COATED $74.50 |
|
|
TMX SNMX 1206ANN-MF PC9530 PVD Coated Carbide Inserts $43.00 |
|
|
TMX SNMX 1206ANN-MM PC3525 PVD Coated Carbide Inserts $39.92 |
|
|
Korloy RNMG64 330 Turning Inserts Carbide TiN Coated pack of 7 $55.20 |
|
|
TMX SPKN 53EDR NCM325 CVD Coated Carbide Inserts $40.20 |
|
|
KENNAMETAL CARBIDE TIN COATED INSERTS ~NEW~ $10.50 |
|
|
3/16″ – 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420187 $15.73 |
|
|
5/16″ – 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420312 $30.00 |
|
|
7/16″ – 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420437 $48.15 |
|
|
5/8″ – 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420625 $94.71 |
|
|
3/4″ – 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420750 $142.52 |
|
|
1″ Helical Brand Carbide AlTiN Coated 7 Flute .045 Corner Radius End Mill (#356) $69.99 |
|
|
TMX RDKT 1605M0-MM PC3545 PVD Coated Carbide Inserts $51.52 |
|
|
TMX RDKT 2006M0-MM PC3545 PVD Coated Carbide Inserts $77.68 |
|
|
TMX SGP 500 NC3030 CVD Coated Carbide Inserts $26.32 |
|
|
TMX WNMG 432-HR NC3030 CVD Coated Carbide Inserts $20.60 |
|
|
9 DORIAN TNMC-32NV-DVP656 TiN COATED CARBIDE INSERTS NEW $3.99 |
|
|
TMX ONMX 080608-MM PC9530 PVD Coated Carbide Inserts $78.72 |
|
|
TMX SDXT 09M405R-MM PC6510 PVD Coated Carbide Inserts $19.92 |
|
|
TMX SNEX 1206ANN-MM PC3525 PVD Coated Carbide Inserts $49.68 |
|
|
1/2″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $59.65 |
|
|
1/4″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $21.60 |
|
|
1/8″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $12.51 |
|
|
3/16″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $15.73 |
|
|
3/4″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $142.52 |
|
|
3/8″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $35.00 |
|
|
1/4″ 3-FLUTE CARBIDE END MILLS (10PCS) TiALN COATED USA MADE 205-031140 $109.50 |
|
|
5/16″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $30.00 |
|
|
1/2″ 3-FLUTE CARBIDE END MILLS (10PCS) TiALN COATED USA MADE 205-001216 $278.55 |
|
|
5/8″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE $94.71 |
|
|
7/16″ – 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420437 $48.15 |
|
|
129 PCS TOSHIBA TUNGALOY CNMM 543 160612 GRADE T803 TIALN COATED CARBIDE INSERTS $129.00 |
|
|
DeWALT DW4843 8 Carbide-Coated Reciprocating Saw Blade $14.64 DeWALT DW4843 8″ Carbide-Coated Reciprocating Saw Blade DEWALT is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. DEWALT tools can be found wherever tools are sold, nationally and internationally. DeWALT DW4843 8″ Carbide-Coated Reciprocating Saw Blade Features: 8″ Carbide-Coated Reciprocating Saw Blade Medium carbide grit offers the ability to cut in hard materials. Blade Type: Coarse Carbide Grit Blade Length: 8 |
|
|
DeWALT DW4844 6 Carbide-Coated Reciprocating Saw Blade – Coarse $10.88 DeWALT DW4844 6″ Carbide-Coated Reciprocating Saw Blade – Coarse DEWALT is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. DEWALT tools can be found wherever tools are sold, nationally and internationally. DeWALT DW4844 6″ Carbide-Coated Reciprocating Saw Blade – Coarse Features: 6″ Carbide-Coated Reciprocating Saw Blade (Coarse) Medium carbide grit offers the ability to cut in hard materials. Blade Type: Coarse Carbide Grit Blade Length: 6 |
|
|
Blair 14006 Carbide Coated Hole Saw Kit $151.33 Carbide Holcutters are carbide tipped to offer improvedperformance and increased tool life in tough to cutmaterials such as stainless steel. These cutters easily cutthru the stock rather than ripping tearing and pushingthru as do typical hole saws. Dramatically outlasts bimetalhole saws and step drills.All cutters include arbor pilot and ejector spring. Thearbor fits 3/8 amp; 1/2 drill chucks. 7/8 11/8 13/8 13/4 2 amp; 21/2 Cutters Arbor amp; Extra Pilot |
|
|
Stone River Gear SRG1TP Titanium Coated Fishing Pliers with Tungsten Carbide Cutters#44; Coiled Lanyard and Sheath $50.57 Heavy Duty Titanium Coated Fishing Pliers with Tungsten Carbide Cutters. Features:. Spring Loaded Stainless Steel Precision Jaws have Fine and Coarse Serrated Teeth for excellent holding power. Ergonomically designed. Sure Grip Comfortable NonSlip Textured Rubber Handles. Constructed from strong corrosionresistant. Titaniumcoated Stainless Steel. Line Cutters made from Tungsten Carbide precision sharpened and designed to cut heavyduty grade monofilament. Easy to replace. Expandable and Detachable Lanyard. Nylon Sheath with Velcro Security Closure. Sheath attaches to belt in vertical or horizontal position. Pliers are a full 71/2 in length. Engineered to meet the extreme needs of both salt and freshwater fishing. Dimensions L x H x W: 9 x 3.88 x 1 |
|
|
Mountain 1/4" Ball Shape Carbide Bur. Each $15.36 Manufacturer: Mountain. Each. Features Benefits: Titanium Coated 7/32″ Length of cut Customers also search for: Discount 1/4″ Ball Shape Carbide Bur, Buy 1/4″ Ball Shape Carbide Bur, Wholesale 1/4″ Ball Shape Carbide Bur, 846035010214, ToolWeb, Grindi |
|
|
Carbide Putty $918.28 Carbide Putty |
|
|
Carbide Scrapers $13.31 Carbide Scrapers |
|
|
Dremel 16472 5 Carbide Scroll Saw Blade (1 per pk.) (5 Pack) $6.01 Dremel 16472 5″ Carbide Scroll Saw Blade (1 per pk.) This tungsten carbide coated blade is tough enough to shape and cut ceramic wall tile. Versatile enough to cut in any direction without turning your work piece. Dremel 16472 5″ Carbide Scroll Saw Blade (1 per pk.) Features: Carbide coated blades cut in all directions eliminating the need to adjust the work piece in order to change the direction of the cut. Carbide coated blades shape and cut ceramic wall tile (not floor tile.) Also used for cutting thin wood. Includes: – One blade per pack. Dremel 16472 5″ Carbide Scroll Saw Blade (1 per pk.) Specifications: Grit 60 Item Description Carbide Coated Blade Kerf .046″ – .048″ Model Number: 16472 |
|
|
Ingersoll-Rand 8 Piece Carbide Burr 1/4” Shank 1/2” Head $148.95 Our most popular 1/4” shank burrs in four different shapes. These TiN coated carbide burrs are provided in a durable storage box that makes it easy to keep the burrs organized.Features:? 1/4” shank titanium nitride coated carbide burrs? Four different shapes: cylidrical, ball-nosed cylindrical, ball & ball-nosed tree? 1/2” & 3/8” head diameters? 5” x 2.75” x 3.75” dimensions? 1.5 lb weight |
|
|
Dremel 801 Carbide Shaping Wheel Bit $12.15 Dremel 801 Carbide Shaping Wheel Bit Dremel 801 Carbide Shaping Wheel Bit Features: Carbide coated shaping tool that quickly and efficiently removes material The unique perforated surface of the shaping wheel allows for cool running, and clears particles away as it works Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic, leather, and even styrofoam Use for furniture restoration, fitting cabinet shelving and baseboards, shaping fiberglass, and hobbies and crafts such as woodcarving, ship building and making doll houses, and ornaments For use with Single-Speed MultiPro Rotary Tool #275 (2561-4231), Two-Speed MultiPro Rotary Tool Kit #2850-02, Variable-Speed MultiPro Rotary Tool #395 (2615-3726), Digital Rotary Tool #398 (2561-4405), MiniMite Cordless Rotary Tool #750 (2561-4249), Cordless MultiPro Rotary Tool Kit #7700 (2561-4421) and Cordless MultiPro Rotary Tool Kit #7800-02 1/8″ collets for this bit 480 (2615-4112) and 585 Carded |
|
|
Ingersoll Rand 30 Piece Carbide Burr Mega Set. Each $285.94 Manufacturer: Ingersoll Rand. Each. Features Benefits Titanium Nitride coated 1/8″ and 1/4″ shank Variety of head shapes and sizes Maximum operating speed of 40,000 RPM Convenient storage box included This 30 piece, carbide burr mega set covers a wide |
|
|
CARBIDE CUTR $12.49 Pricing subject to change. CARBIDE CUTR |
|
|
CGW Abrasives 42134613 7X14X114 T1 Gc100IVgreen Silicon Carbide Su $29.38 Camel Grinding Wheels discs and abrasives As a leading manufacturer and worldwide supplier of abrasive products resin and vitrified bonded grinding wheels and cutoff wheels flap discs coated and super abrasives CGW is unconditionally committed to the quality and safety of its products. . Tool Shape: Type 1. Diameter: 7amp;quot;. Thickness: 1/4amp;quot;. Arbor Diameter: 11/4amp;quot;. Abrasive Material: Green Silicon Carbide. Grit: 100. Hardness Grade: I. Speed: 3760 rpm. Applications: General Purpose Grinding. Applicable Materials: Tungsten Carbide’ NonFerrous Metals. |
|
|
CGW Abrasives 42134629 7X12X114 T1 Gc100IVgreen Silicon Carbide Su $32.92 Camel Grinding Wheels discs and abrasives As a leading manufacturer and worldwide supplier of abrasive products resin and vitrified bonded grinding wheels and cutoff wheels flap discs coated and super abrasives CGW is unconditionally committed to the quality and safety of its products. . Tool Shape: Type 1. Diameter: 7amp;quot;. Thickness: 1/2amp;quot;. Arbor Diameter: 11/4amp;quot;. Abrasive Material: Green Silicon Carbide. Grit: 100. Hardness Grade: I. Speed: 3760 rpm. Applications: General Purpose Grinding. Applicable Materials: Tungsten Carbide’ NonFerrous Metals. |
|
|
CGW Abrasives 42134681 8X12X114 T1 Gc80IVgreen Silicon Carbide Su $39.07 Camel Grinding Wheels discs and abrasives As a leading manufacturer and worldwide supplier of abrasive products resin and vitrified bonded grinding wheels and cutoff wheels flap discs coated and super abrasives CGW is unconditionally committed to the quality and safety of its products. . Tool Shape: Type 1. Diameter: 8amp;quot;. Thickness: 1/2amp;quot;. Arbor Diameter: 11/4amp;quot;. Abrasive Material: Green Silicon Carbide. Grit: 80. Hardness Grade: I. Speed: 3600 rpm. Applications: General Purpose Grinding. Applicable Materials: Tungsten Carbide’ NonFerrous Metals. |
|
|
CGW Abrasives 42134655 7X1X114 T5 Cg60IV Green Silicon Carbide Surf $39.81 Camel Grinding Wheels discs and abrasives As a leading manufacturer and worldwide supplier of abrasive products resin and vitrified bonded grinding wheels and cutoff wheels flap discs coated and super abrasives CGW is unconditionally committed to the quality and safety of its products. . Tool Shape: Type 5. Diameter: 7amp;quot;. Thickness: 1amp;quot;. Arbor Diameter: 11/4amp;quot;. Abrasive Material: Green Silicon Carbide. Grit: 60. Hardness Grade: I. Speed: 3760 rpm. Applications: General Purpose Grinding. Applicable Materials: Tungsten Carbide’ NonFerrous Metals. |
|
|
CGW Abrasives 42134680 8X12X114 T1 Gc60IVgreen Silicon Carbide Su $39.07 Camel Grinding Wheels discs and abrasives As a leading manufacturer and worldwide supplier of abrasive products resin and vitrified bonded grinding wheels and cutoff wheels flap discs coated and super abrasives CGW is unconditionally committed to the quality and safety of its products. . Tool Shape: Type 1. Diameter: 8amp;quot;. Thickness: 1/2amp;quot;. Arbor Diameter: 11/4amp;quot;. Abrasive Material: Green Silicon Carbide. Grit: 60. Hardness Grade: I. Speed: 3600 rpm. Applications: General Purpose Grinding. Applicable Materials: Tungsten Carbide’ NonFerrous Metals. |
|
|
CGW Abrasives 42134628 7X12X114 T1 Gc80IVgreen Silicon Carbide Su $32.92 Camel Grinding Wheels discs and abrasives As a leading manufacturer and worldwide supplier of abrasive products resin and vitrified bonded grinding wheels and cutoff wheels flap discs coated and super abrasives CGW is unconditionally committed to the quality and safety of its products. . Tool Shape: Type 1. Diameter: 7amp;quot;. Thickness: 1/2amp;quot;. Arbor Diameter: 11/4amp;quot;. Abrasive Material: Green Silicon Carbide. Grit: 80. Hardness Grade: I. Speed: 3760 rpm. Applications: General Purpose Grinding. Applicable Materials: Tungsten Carbide’ NonFerrous Metals. |
|
|
Ingersoll Rand IRTM30TiN 30 Piece Carbide Burr Mega Set $386.08 Features and Benefits Titanium Nitride coated 1/8 and 1/4 shank Variety of head shapes and sizes Maximum operating speed of 40 000 RPM Convenient storage box includedThis 30 piece carbide burr mega set covers a wide range of applications. The handy storage box keeps burrs organized and ready for use. One of each burr (cylindrical ball nosed cylindrical ball nosed tree ball nosed cone pointed tree and ball) with 1/4 and 1/8 shanks and various head diameters. |
|
|
Tungsten Carbide Bur Bits $39.92 Tungsten Carbide Bur Bits |
|
|
Carbide-Tipped Core Bits $393.55 Carbide-Tipped Core Bits |