Cemented Carbide
March 13th, 2010
Backerboard, Cement Board, Blue Board. Call it whatever. Anyone found an easy way to cut it?
I’ve installed a fair amount of this stuff behind tub-surrounds & showers. I generally use a jig saw with a carbide blade, which promptly goes dull. Any experienced tile workers out there find a better way?
If you can handle a little dust, they make a cement board blade for a 7″ circular saw. It has about 24 big teeth on it and it slices right though. It will give you a nice clean edge. But there is the dust factor so I always set up outside and use a dust mask. I’ve used the blade for about 3 years and it is still sharp.
ZCCCT Solid Carbide Mills and Drills.wma
|
|
Drill Masters Cemented Carbide 12 MM (.4724)” Coolant Fed Gun Drill Bit 11″ OAL $9.99 |
|
|
30° Blade for Roland Cutter Cemented Carbide $3.50 |
|
|
Interstate #ICC-17480-M Q3445 TPMR432 Cemented Carbide Inserts $84.69 |
|
|
Lot of (4) Used 1/2″ Kennametal and Sandvik Cemented Carbide Tool Bits $0.99 |
|
|
Interstate Cemented Blank Carbide Inserts SBI-11200B $15.99 |
|
|
8PCS KOMET UNISIX ALUM CEMENTED CARBIDE W29 24000:0461 #264 $79.00 |
|
|
Cemented Carbide Tools- 883 Grade $50.00 |
|
|
6 Flute Cemented Brazed Shroud Step Carbide Reamer .550″ x 2″ Flute Length $19.00 |
|
|
CEMENTED CARBIDE TOOLS D. S. Shute Book on CD $7.95 |
|
|
Pack of 10 Indexible Boring Cemented Carbide Inserts TNMG-431 C5/P30 New $34.00 |
|
|
(4) NEW KOMET CEMENTED CARBIDE INSERTS K 01 381204 P40 **NEW** LOT A239 $15.00 |
|
|
Carboloy cemented carbide inserts – TNMA 322E $34.56 |
|
|
2X Sandvik Cemented Carbide 8725-1-EN SHM-8215092A $50.00 |
|
|
1949 CARBOLOY CEMENTED CARBIDE TOOL MANUAL GE Company $9.95 |
|
|
45° Blade for Roland Cutter Cemented Carbide (5pcs) US Ship $20.00 |
|
|
60° Blade for Roland Cutter Cemented Carbide (5pcs) US Ship $20.00 |
|
|
30° Blade for Roland Cutter Cemented Carbide (5pcs) US Ship $20.00 |
|
|
30 DEGREES – Cemented Carbide Cutting Plotter Blades for Roland & ArtSign $19.95 |
|
|
60 DEGREE Cemented Carbide Blades for Roland & Artsign Cutting Plotters $19.95 |
|
|
Roland / Artsign 30, 45 or 60 DEGREES – Cemented Carbide Cutting Plotter Blades $19.99 |
|
|
Roland / Artsign 30, 45 or 60 DEGREES – Cemented Carbide Cutting Plotter Blades $19.99 |
|
|
Roland / Artsign 30, 45 or 60 DEGREES – Cemented Carbide Cutting Plotter Blades $19.99 |
|
|
6 Interstate Cemented Carbide Inserts 10ICX19057M I 55 $9.99 |
|
|
45° Blade for Roland Cutter Cemented Carbide US fast ship $3.50 |
|
|
45° Blade for Roland Cutter Cemented Carbide $3.50 |
|
|
30° Blade for Roland Cutter Cemented Carbide US fast ship $3.50 |
|
|
2 ADAMS CEMENTED CARBIDE INSERTS SNMG544A ACT5 NEW $12.00 |
|
|
9 PCS ADAMS CNMG 432 A ROX CEMENTED CARBIDE INSERTS $35.99 |
|
|
10 INTERSTATE CEMENTED CARBIDE INSERT CHR-70480-L IRSN-32 SHIM NEW $24.50 |
|
|
1945 Vintage Ad Carboloy Cemented Carbide Metal Made $6.99 |
|
|
32 Coromant Cemented Carbide Inserts 322 315 81741 $29.99 |
|
|
3/4″ x 1-1/2″ x 8″ Lathe Tool Bit Tip Carbide Tipped cemented Holder Tooling $3.99 |
|
|
6Pcs 45° HQ Cemented Carbide Blades Knife for Roland Cutter Cutting Plotter $11.50 |
|
|
6Pcs 30° HQ Cemented Carbide Blades Knife for Roland Cutter Cutting Plotter $11.50 |
|
|
6Pcs 60° HQ Cemented Carbide Blades Knife for Roland Cutter Cutting Plotter $11.50 |
|
|
9Pcs 45° HQ Cemented Carbide Blades Knife for Roland Cutter Cutting Plotter $15.99 |
|
|
9Pcs 30° HQ Cemented Carbide Blades Knife for Roland Cutter Cutting Plotter $15.99 |
|
|
9Pcs 60° HQ Cemented Carbide Blades Knife for Roland Cutter Cutting Plotter $15.99 |
|
|
12Pcs 60° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $19.50 |
|
|
12Pcs 45° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $19.50 |
|
|
12Pcs 30° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $19.50 |
|
|
15Pcs 30° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $22.30 |
|
|
15Pcs 45° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $22.30 |
|
|
15Pcs 60° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $22.30 |
|
|
18Pcs 60° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $25.00 |
|
|
18Pcs 30° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $25.00 |
|
|
18Pcs 45° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $25.00 |
|
|
21Pcs 45° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $28.00 |
|
|
21Pcs 30° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $28.00 |
|
|
21Pcs 60° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $28.00 |
|
|
24Pcs 60° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $31.00 |
|
|
24Pcs 30° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $31.00 |
|
|
24Pcs 45° HQ Cemented Carbide Blades Knife Roland Cutter Cutting Plotter Can Mix $31.00 |
|
|
Hannibal Cemented Carbide Straight Flute Chucking Reamer $22.40 |
|
|
Hannibal 3/4 Inch Cemented Carbide Cutter/Reamer $45.00 |
|
|
1945 Carboloy Cemented Carbide Cooking Utensils Pioneer Couple Salesman Ad $9.95 |
|
|
SGS Carbride Bur No 13953 SE-6 D/C C BUR Tool with Plastic Tube Cemented Carbide $19.99 |
|
|
Drill Masters Cemented Carbide .5525″ Coolant Fed Gun Drill Bit 12″ OAL $57.15 |
|
|
Drill Masters Cemented Carbide .6760″ Coolant Fed Gun Drill Bit 12″ OAL $62.14 |
|
|
Cleveland Cemented Carbide “Letter L” Std Spiral Long Length Drill Bit $13.58 |
|
|
Hannibal Cemented Carbide 3.0″x1.25″x1 1/8″ FL 6 Flute 60 Degree End Mill $112.70 |
|
|
Koolcarb Cemented Carbide 18.5mm Coolant Fed 135° Cam Notch Drill Bit $107.00 |
|
|
Koolcarb Cemented Carbide 39/64″ Coolant Fed Hel. Pt. 2.3″ Depth Drill Bit $54.50 |
|
|
Cemented Carbide Blades for Roland & ArtSign Vinyl Cutting Plotters – 45 degrees $19.95 |
|
|
60° Blade for Roland Cutter Cemented Carbide $3.50 |
|
|
Cleveland Cemented Carbide .7500″ Straight Flute Chucking Reamer $16.09 |
|
|
Cleveland Cemented Carbide 00.9970 Straight Flute Chucking Reamer $30.14 |
|
|
Hannibal Cemented Carbide .3030″ Straight Flute Chucking Reamer $16.08 |
|
|
Hannibal Cemented Carbide 00.7390 Straight Flute Thru Cool Chucking Reamer $61.00 |
|
|
Hannibal Cemented Carbide 00.3480 Straight Flute Chucking Reamer $15.16 |
|
|
Hannibal Cemented Carbide 00.6278″ Straight Flute Chucking Reamer $25.38 |
|
|
Hannibal Cemented Carbide .6290″ Straight Flute Chucking Reamer $19.50 |
|
|
Hannibal Cemented Carbide 00.6860 12″ OAL Straight Flute Chucking Reamer $72.58 |
|
|
Hannibal Cemented Carbide .7374″ Straight Flute Chucking Reamer $19.46 |
|
|
Hannibal Cemented Carbide 00.8110″ Straight Flute Chucking Reamer $21.52 |
|
|
Hannibal Cemented Carbide .8200″ .075 Radius Straight Flute Chucking Reamer $33.31 |
|
|
Hannibal Cemented Carbide 01.1315 Straight Flute Chucking Reamer $40.00 |
|
|
Hannibal Cemented Carbide .3127″ X .3107″ Step Assembly Reamer $15.89 |
|
|
Hannibal Cemented Carbide SPECIAL 00.3280″ 3″ Flute Length Assembly Reamer $44.98 |
|
|
Houstan .3115″ Cemented Carbide 12″ OAL Straight Flute Reamer $51.69 |
|
|
Koolcarb Cemented Carbide 00.2440 Coolant Fed Straight Flute Blind Hole Reamer $44.50 |
|
|
Koolcarb Cemented Carbide .6195″ Straight Flute Coolant Fed Blind Hole Reamer $46.00 |
|
|
2 New Sandvik Cemented Carbide Can Tooling Application *** $40.00 |
|
|
10-pk Zhuzhou Cemented Carbide Cutting Tools Co YBG302 $36.99 |
|
|
10- Sandvick Carbide Cemented Solutions CAN TOOLING T112D-D0876-C SHM-8266211-J $109.95 |
|
|
Lathe Tool Bit Cemented Carbide Tipped Tooling 3/4″ x1″ $3.95 |
|
|
Cemented Tungsten Carbides $205 Written by an international expert, this book covers the processing, microstructure, and properties of cemented tungsten carbides. It is divided into 18 chapters covering wide areas from crystal structure to phase equilibria, production of metal and carbide powders, and much more. This book is ideal for researchers, plant engineers, and senior level students in metallurgical/mechanical/materials engineering who are interested in cemented carbides. There is no parallel book in print. |
|
|
Cemented Tungsten Carbides by Upadhyaya, Gopal S. Edition , $180 Written by an international expert, this book covers the processing, microstructure, and properties of cemented tungsten carbides. It is divided into 18 chapters covering wide areas from crystal structure to phase equilibria, production of metal and carbide powders, and much more. This book is ideal for researchers, plant engineers, and senior level students in metallurgical/mechanical/materials engineering who are interested in cemented carbides. There is no parallel book in print. |
|
|
The 2006-2011 World Outlook for Powder Metallurgy Materials Excluding Bearings, Gears, and Machine Cutting Tools and All Cemented Carbide Parts $795 The latent demand for powder metallurgy materials excluding bearings, gears, and machine cutting tools and all cemented carbide parts is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market. |
|
|
Cemented Carbide Tools in Japan : A Strategic Entry Report, 1996 $97.45 No Synopsis Available |
|
|
The Well-Cemented Total Hip Arthroplasty $159 Provides a comprehensive assessment of the entire field of Cemented Total Hip Arthroplasty (THA). With illustrations and detailed operative steps as practical guidelines, this book is written and suitable for both, trainees and established arthroplasty surgeons, who are dedicated to perform a well-cemented THA. |
|
|
Radiated, Rodded, Cemented and Sliced by Mikesell, Janice H. Edition , 0 $17.99 Radiated, Rodded, Cemented and Sliced. Mikesell, Janice H. |
|
|
Environmental Impacts of Cemented Mine Waste Backfill $21.02 Original publisher: Washington, D.C.?]: U.S. Dept. of the Interior, Bureau of Mines, 1996] OCLC Number: (OCoLC)233823702 Subject: Mine filling — Environmental aspects. Excerpt: … 9 The neutralizing capacities of the uncemented tailings The neutralizing capacities of the uncemented tailings samples were calculated on the basis of maximum leachability samples were calculated on the basis of maximum leachability data and estimated mineralogy ( table 5 ). Ca, Mg, and Mn were data and estimated mineralogy ( table 5 ). Ca, Mg, and Mn were assigned to carbonate minerals whereas Na assigned to carbonate minerals whereas Na Table 4. – Acid-neutralizing capacity of portland cement in Sample CN had all the measured S required for Pb and Zn backfill samples, milliequivalents compounds. Therefore, in agreement with the mineralogical analyses, all Fe in the sample was assigned to siderite in Sample CaO MgO K O Total 2 calculations of neutralization capacity. Samples SO and SN CN……… 314.0 25.2 2. O 341.2 had small amounts of Fe assigned to pyrite with the rest SN……… 264.4 21.2 1.6 287.2 considered to be siderite. The value for siderite in sample SO SO……… 344.6 27.6 2.2 374.4 is probably too high because some Fe probably has oxidized to goethite; however, an approximation can be completed using Table 5. – Acid-neutralizing capacity of tailings in backfill samples, milliequivalents lesser amounts of Fe and taking this first calculation as an extreme value. Sample Sum of Ca, Mg, Fe Total The total neutralization capacity of the cemented backfill Mn, K, and Na calculated as the sum of the capacities of the cement and the CN……… 109.7 366.6 476.3 backfill is given in table 6. The neutralizing capacity of the SN……… 80.2 124.4 204.6 cemented tailings compared to tailings alone, and not including SO……… 142.2 403.2 545.4 contributions from siderite, was approximately 3.6 times greater in the SO sample, 4.1 times greater in the CN sample, If Pb … |
|
|
Carbide Putty $918.28 Carbide Putty |
|
|
Carbide Scrapers $13.31 Carbide Scrapers |
|
|
Cemented Tungsten Carbides : Production, Properties, and Testing $152.9 No Synopsis Available |
|
|
CARBIDE CUTR $12.49 Pricing subject to change. CARBIDE CUTR |
|
|
Tungsten Carbide Bur Bits $39.92 Tungsten Carbide Bur Bits |
|
|
Carbide-Tipped Core Bits $393.55 Carbide-Tipped Core Bits |
|
|
Carbide Tipped Hole Saws $78.48 Carbide Tipped Hole Saws |