Carbide Spade Drill
September 2nd, 2010
spade drill in inconel 715
|
|
WIDIA 32MM CARBIDE SPADE DRILL $39.99 |
|
|
10 KIENINGER WPR 0500-N CARBIDE SPADE DRILL INSERTS,1/2″DIA. $3.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT .640″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 15MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 31/64″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 47/64″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT .7580″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 23/32″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 21.58MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 29/32″ $34.99 |
|
|
SOLID CARBIDE SPADE DRILL INSERTS 31/32, 1 1/64 1 39/64 LOT OF 17 #5811 $62.50 |
|
|
10 PCS DOALL SOLID CARBIDE 15/32″ .4687 DIAMETER SPADE DRILLS $99.00 |
|
|
Quality Carbide Tool SC Spade Drill 3/8″ $7.99 |
|
|
Kennametal .758″ Spade Drill Carbide Insert 81702, 91733, 81689 $4.44 |
|
|
Kennametal 1.125″ 1 1/8″ Spade Drill Carbide Insert 85506, 85975, 86444, 87456 $5.92 |
|
|
Kennametal 0.945″ Spade Drill Carbide Insert 94349, 105215 $4.73 |
|
|
Kennametal Lot 3 Spade Drill Carbide Inserts .938″ 1.0156″ 1.3125″ S06222 83951 $13.99 |
|
|
2 pcs 1-5/32″ new solid carbide spade drill inserts. $21.95 |
|
|
2 pcs 1-9/64″ new solid carbide spade drill inserts. $18.95 |
|
|
2 pcs of 1.302 solid carbide spade drill inserts. $19.95 |
|
|
3 pcs of 1.370 solid carbide spade drill inserts. $24.95 |
|
|
4 pcs of .367–.423–.458 new solid carbide spade drill inserts. $21.95 |
|
|
4 pcs of .508–.5625–.589 solid carbide spade drill inserts. $21.95 |
|
|
4pcs of solid carbide spade drill inserts. $23.95 |
|
|
4 pcs .900-.963-.975 new solid carbide spade drill inserts. $21.95 |
|
|
SOLID CARBIDE 9-64 SPADE DRILL $15.00 |
|
|
Metal Removal Carbide Spade Drill 3/32″ NEW (B*32) $9.95 |
|
|
AMEC #1026T-0322 3-11/16″ Spade Carbide Drilling Insert $199.99 |
|
|
STELLRAM Spade Drill Carbide Insert SP9530 US3-1.7187 $17.50 |
|
|
STELLRAM Spade Drill Carbide Insert SP9530 US3-1.4688 $22.24 |
|
|
MICRO 100 Carbide Spade Drill 5/16″ SD-312 (Z27) $25.00 |
|
|
3/16 Spade Drill, (.1875″) Solid Carbide GARR, 5 pcs, TIN Coated $8.00 |
|
|
Atrax A7300070 9/32″ 2 straight Flutes Carbide Spade Drills $176.99 |
|
|
51/64″ AMEC 1C21T-.796 SPADE DRILL INSERT C2 CARBIDE TiN COATED #1 SERIES TA T-A $13.00 |
|
|
4 pcs 1-9/64″ new solid carbide spade drill inserts. $35.95 |
|
|
Drilling Bit~Drag~Spade~Truck Mounted Rig~Changable Blades~Carbide~Oilfield $99.99 |
|
|
SPADE DRILL BLADES TICN .9375 CARBIDE INSERTS FREE SHIP $31.99 |
|
|
GEN3SYS REPLACEABLE 30MM CARBIDE SPADE DRILL INSERT $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 1-1/4″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 19MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 17MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 13/16″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 14MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 7/8″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 33MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 32MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 21.5MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 16.08MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 18.5MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 18.45MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 14.5MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 13.32MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 13MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 12.5MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 12MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 1-3/16″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 1-1/16″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 1″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 3/4″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 27/32″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 45/64″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 33/64″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 29/64″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 21/64″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 37/64″ $24.99 |
|
|
20MM SERIES 1 SOLID CARBIDE SPADE DRILL INSERT-ALLIED (E-1-4-2-31) $38.66 |
|
|
18.5 MM SERIES 1 SOLID CARBIDE SPADE DRILL INSERT-ALLIED (E-1-4-2-33) $38.66 |
|
|
18 MM SERIES 1 SOLID CARBIDE SPADE DRILL INSERT-ALLIED (E-1-4-2-34) $38.66 |
|
|
22 MM SERIES 1 SOLID CARBIDE SPADE DRILL INSERT-(E-1-4-2-35) $38.66 |
|
|
.953″ AMEC 1C51A-.953 SPADE DRILL INSERT CARBIDE TiALN $13.00 |
|
|
ROCK RIVER TOOL 267427 27/64″ 120° Carbide Tipped Straight Shank Spade Drill i6 $19.95 |
|
|
18.5MM SERIES 1 SPADE DRILL INSERT SOLID CARBIDE TREATED (E-1-4-2-30) $38.66 |
|
|
1-9/32 SERIES 2 P40 SOLID CARBIDE SPADE DRILL INSERT TIALN COAT (E-1-4-3-19) $48.55 |
|
|
25.55 MM SERIES 2 SOLID CARBIDE SPADE DRILL INSERT ALLIED (E-1-4-3-20) $48.55 |
|
|
19.55 MM (.769) SERIES 1 SOL. CARBIDE C2 SPADE DRILL INSERT (E-1-4-3-21) $41.15 |
|
|
19/32 SERIES 0 SOLID P40 GRADE CARBIDE SPADE DRILL INSERT (E-1-4-3-17) $36.77 |
|
|
19 MM (.748) SERIES 1 SOLID P40 GRADE CARBIDE SPADE DRILL INSERT (E-1-4-3-18) $41.53 |
|
|
New 5 Pcs – .359 Dia. Solid Carbide Spade Drills Mohawk Tools $29.95 |
|
|
New 5 Pcs – .260 Dia. Solid Carbide Spade Drills Mohawk Tools $29.95 |
|
|
New 5 Pcs – .359 Dia. Solid Carbide Spade Drills with 1/4″ Shank $29.95 |
|
|
New 5 Pcs – .199 Dia. Solid Carbide Spade Drills $29.95 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 19/32″ $24.99 |
|
|
National Carbide Spade Drill Holder 5″ – Coolant Fed – 86-400-2298NC $79.99 |
|
|
MICRO 100 Carbide Spade Drill 7/32″ x 2″ SD-218 [Y*124] $18.00 |
|
|
10 STELLRAM Carbide Spade Uni-Drill Insert UC 110 HR DF $243.75 |
|
|
8 PCS Carbide Multi-function Shank Routing Auger Forstner Spade Turning Drilling $49.00 |
|
|
Posa-Cut #94322/86884 2150-5D A Carbide Form Spade Drills $528.99 |
|
|
Posa-Cut #94322/86884 2150-5D A Carbide Form Spade Drills, 1 Box of 4 $325.70 |
|
|
Last ones!! 2 NEW AMEC-ALLIED T-A #1 SPADE INSERTS .7970″ C5 CARBIDE 1C51T-.7970 $24.39 |
|
|
AMEC #0 T-A 13mm Spade Drill inserts 1C20T-13 tin coated carbide 3 Pieces $79.00 |
|
|
New 5 Pcs – .297 Dia. Solid Carbide Spade Drills Mohawk Tools $26.36 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 1.008″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 1.0150″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 23MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 22MM $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 15/16″ $34.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 1/2″ $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 12MM $24.99 |
|
|
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT 16MM $24.99 |
|
|
2-23/64″ SOLID CARBIDE SPADE DRILL BLADE $9.99 |
|
|
Solid Carbide Drill #56 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Solid Carbide Drill #28 Solid Carbide Drill $28.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Solid Carbide Drill #29 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Solid Carbide Drill #33 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Solid Carbide Drill #36 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Solid Carbide Drill #50 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Solid Carbide Drill #38 Solid Carbide Drill $29.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Solid Carbide Drill #31 Solid Carbide Drill $29.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less. |
|
|
Carbide Hammer Drill Bit Sets $32.04 Carbide Hammer Drill Bit Sets |
|
|
Carbide-Tipped Hammer Drill Bits $12.73 Carbide-Tipped Hammer Drill Bits |
|
|
Carbide Tipped Hammer Drill Bits $66.23 Carbide Tipped Hammer Drill Bits |