Carbide Inserts
December 21st, 2009
what are the content in the carbide inserts?
Tungsten carbide, WC or W2C, is a chemical compound containing tungsten and carbon, similar to titanium carbide. Its extreme hardness makes it useful in the manufacture of cutting tools, abrasives and bearings, as a cheaper alternative to diamond. Tungsten carbide is also used in wedding rings.
In a tragic 1945 accident, Harry K. Daghlian, Jr. dropped a brick of tungsten carbide (which is a neutron reflector) onto a plutonium core, causing it to reach critical mass. He died a month later, of radiation exposure.
Uses in machine tools
Carbide cutting surfaces are often useful when machining tough materials, such as carbon steel or stainless steel, as well as in situations where other tools would wear away, such as high-quantity production runs. Sometimes, carbide will leave a better finish on the part, and allow faster machining. Carbide tools can also withstand higher temperatures than standard high speed steel tools.
Machining with carbide can be difficult, as carbide is more brittle than other tool materials, making it susceptible to chipping and breaking. To offset this, many manufacturers sell carbide inserts and matching insert holders. With this setup, the small carbide insert is held in place by a larger tool made of a more rigid material (usually steel). This gives the benefit of using carbide without the high cost of making the entire tool out of carbide. Also, the inserts can be changed without losing much accuracy, allowing the machinist to simply swap out a broken insert without re-zeroing the machine. Most modern face mills use carbide inserts, as well as some lathe tools and endmills.
Infinity Cutting Tools – INSERT PRO™ ROUTER BITS – Changing Knives Is Quick & Easy!
|
|
5 new CIRCLE MACHINE CMGR-125-250-008-GP-C25 Grooving Carbide Inserts 59006 $69.07 |
|
|
KENNAMETAL Carbide Inserts TNMG331UP KC9240 Qty 5 [203] $25.00 |
|
|
8mm Boring Bar SCLCL To Suit CCMT Carbide Insert $37.92 |
|
|
CERATIP NDMM 12T308 ER-T Carbide Inserts NEW 10pc Box $15.00 |
|
|
5 new CIRCLE MACHINE CMFR-2-016-050-CM1 Grooving Carbide Inserts 59007 $73.09 |
|
|
5 new CIRCLE MACHINE CMFR-2-016-050-C25 Grooving Carbide Inserts 59010 $73.09 |
|
|
5 new CIRCLE MACHINE CMFR-2-031-100-CM1 Grooving Carbide Inserts 59011 $73.09 |
|
|
KENNAMETAL Carbide Inserts CNMG542UP KC9240 Qty 5 [203] $45.00 |
|
|
Sandvik TCMX110308-WF TCMX222-WF 4015 Carbide Inserts $161.69 |
|
|
10 NEW Walter INSERTS SPMT 120408 – D51 WAP35 $45.00 |
|
|
5 new CIRCLE MACHINE CMFR-2-031-100-TR1 PVD TiALN Grooving Carbide Inserts 59013 $97.65 |
|
|
DIJET Carbide Inserts CNMG-190612UD JC215V Qty:10 [P54] $48.00 |
|
|
5 new CIRCLE MACHINE CMFR-5-016-050-CG5 Grooving Carbide Inserts 59016 $84.26 |
|
|
KENNAMETAL INSERT $36.50 |
|
|
5 new CIRCLE MACHINE CMFR-5-016-050-TR1 PVD TiALN Grooving Carbide Inserts 59017 $97.65 |
|
|
Spin Doctor RI Golf Wedge Tungsten Carbide Inserts 5 LH $39.95 |
|
|
KENNAMETAL Carbide Inserts TNMG332MS1 9230 Qty 5 [203] $25.00 |
|
|
10pcs.SECO TCMT 32.52-F1 TP3500 / 16T308-F1 TP3500 carbide inserts $55.00 |
|
|
5 new CIRCLE MACHINE CMFR-5-031-100-TR1 PVD TiALN Grooving Carbide Inserts 59021 $97.65 |
|
|
RTW MI 332R 716 Carbide Inserts Box of 10 $47.99 |
|
|
KENNAMETAL DIAL SET ADJUSTABLE BLADES DS 737 PCFNR 12 $89.45 |
|
|
20 x ISCAR DCMT 3-1-SM IC907 11T304-SM Carbide Inserts New! Cnc Lathe $119.99 |
|
|
SPARTAN DNMA431 Carbide Indexable Insert Qty: 15 [P54] $45.00 |
|
|
5 new CIRCLE MACHINE CMFR-5-062-160-CG5 Grooving Carbide Inserts 59024 $84.26 |
|
|
5 new CIRCLE MACHINE CMFR-8-031-100-CG5 Grooving Carbide Inserts 59028 $84.26 |
|
|
Seco CCMT160508-F2 CCMT53.52-F2 TK2000 Carbide Inserts $138.39 |
|
|
CNMA 644 CARBIDE INSERTS WKI 2052130940 WAUKESHA (D-2-3-15-A-FR100-VS) $15.00 |
|
|
10pcs.WALTER CNMG 120412-NM6 WPP30 / 433-NM6 WPP30 $50.00 |
|
|
5 new CIRCLE MACHINE CMGN-125-500-CM1 Grooving Carbide Inserts 59035 $79.90 |
|
|
CNMA 432 NM5 CARBIDE INSERTS WTA 33 WAUKESHA (D-1-10-8-A-FR101-VS) $10.00 |
|
|
10 PCS NG3062L KC850 KENNAMETAL CARBIDE INSERTS 1* $111.00 |
|
|
Tool Flo TF1778-S / FGS-2A SEAT Carbide Inserts Box of 10 $47.99 |
|
|
20 NEW KENNAMETAL VNMA 332 KC9315 CARBIDE INSERTS S244 $80.00 |
|
|
Mitsubishi RGEN2004M0SN UP20M Carbide Milling Inserts $204.04 |
|
|
Tool Flo TF1778-S / FGS-2A SEAT Carbide Inserts Box of 5 $26.39 |
|
|
20 NEW VALENITE WCEM 1.81.51 V1N CARBIDE INSERTS M768S $39.99 |
|
|
Tungsten TNMM432H KT300 Carbide Turning Inserts $220.99 |
|
|
Teledyne Carbide Insert NDC 832A GR. T-14 $2.99 |
|
|
Iscar Carbide Insert Boring Tool A25R – MWLNL – 08W $98.79 |
|
|
86 PCS SUMITOMO TNMG 333 GRADE AC1000 GOLD COATED CARBIDE INSERTS $79.00 |
|
|
NTK Cutting CCGT 21.501R S ZM3 Positive Turning Inserts CCGT 060200R S ZM3 $135.99 |
|
|
KENNAMETAL Carbide Inserts SPMT3251LF 9320 Qty 5 [203] $30.00 |
|
|
WALTER INSERT $93.00 |
|
|
TNMC54NT3.5P P7 CARBIDE INSERTS $79.99 |
|
|
10 pcs. sandvik vnmg 331 mf gr. 2025 carbide inserts $64.99 |
|
|
SUMITOMO T42106009D CARBIDE TOOL MILL NIB $24.99 |
|
|
SECO Carbide Inserts WNMG 333W-M3 TP1000 Qty: 10 [159] $35.00 |
|
|
Mitsubishi RGEN2004M0SN UTi20T Carbide Milling Inserts $193.44 |
|
|
Sandvik 176.39-850 Carbide Shims (10) NIB $30.00 |
|
|
KENNAMETAL Carbide Inserts TNMG332UP KC9240 Qty 5 [204] $25.00 |
|
|
VALENITE End Mill Kit & Inserts SNMT43531 1-1/4″ USA / Germany NEW [AF1] $198.00 |
|
|
DIJET Index Inserts RDHX 5015 MOT JC5030 Qty: 10 [159] $35.00 |
|
|
WALTER INSERT $73.00 |
|
|
Mitsubishi TPMN160312 TPMN323 NX55 Cermet Turning Inserts $77.99 |
|
|
VALENITE CARBIDE INSERTS VN5 $40.00 |
|
|
Interstate CNMG-431 TCN-27010-K Y2469 TCN55 Carbide Turning Inserts $110.99 |
|
|
ISCAR SPC 422E IC-50M Carbide Inserts Lot of 10 New $19.90 |
|
|
30pcs. of SECO VBMT 21.51-F1 (110204-F1) ,TP2500 $135.00 |
|
|
KENNAMETAL Carbide Inserts A4C0255L10CF02 Qty 10 [204] $45.00 |
|
|
KENNAMETAL ANGT-1623P3R (ANGT-1003PPR) CARBIDE INSERTS $75.00 |
|
|
RTW SNMZ-432E 918 CARBIDE INSERTS $31.99 |
|
|
5 new CIRCLE MACHINE CMGN-187-250-CM1 Grooving Carbide Inserts 58000 $60.86 |
|
|
5 new CIRCLE MACHINE CMGN-016-050-CM1 Grooving Carbide Inserts 58001 $60.86 |
|
|
5 new CIRCLE MACHINE CMGN-031-100-CM1 Grooving Carbide Inserts 58004 $60.86 |
|
|
KENNAMETAL Carbide Inserts DNMG443RP KC9240 Qty 5 [204] $45.00 |
|
|
Mitsubishi TPGD631 TPGX080204 NX55 Cermet Inserts $159.99 |
|
|
KENNAMETAL STN-16-16UN-I CARBIDE THREADING INSERTS $20.00 |
|
|
5 new CIRCLE MACHINE CMGN-031-100-CG5 PVD Coat Grooving Carbide Inserts 58005 $66.26 |
|
|
SANVICK COROMANT CARBIDE INSERTS 4025 $56.00 |
|
|
10 new ISCAR carbide inserts XOMT 060204-HQ IC328 $54.75 |
|
|
5 new CIRCLE MACHINE CMGN-047-140-CG5 PVD Coat Grooving Carbide Inserts 58008 $66.26 |
|
|
20pcs.INGERSOLL AOMT 110304R IN 1030 inserts $130.00 |
|
|
KENNAMETAL LT-16ER-A60 CARBIDE THREADING INSERTS $25.00 |
|
|
20 NEW KENNAMETAL GSP 094L KC935 CARBIDE INSERTS L586S $49.99 |
|
|
Sandvik SNMG543MM 2025 Carbide Inserts Box of 11 $143.99 |
|
|
Mitsubishi SNMG120412 SNMG433 UTi20T Carbide Inserts $77.76 |
|
|
5 new CIRCLE MACHINE CMGN-062-188-CM1 Grooving Carbide Inserts 58010 $60.86 |
|
|
10 new TUNGALOY Carbide Inserts CCGT431-PP H10T 120404 $103.50 |
|
|
KENNAMETAL SDEB-26151 & SDEB-26152 CARBIDE INSERTS $15.00 |
|
|
5 new CIRCLE MACHINE CMGN-062-188-CG5 PVD Coat Grooving Carbide Inserts 58011 $66.26 |
|
|
5 NEW Kennametal CNMM 644 Carbide Inserts Kentrol CNMM 19 06 16 Grade KC850 $19.95 |
|
|
(9) Fansteel RCP 43 Carbide Indexable Inserts Gr. 2A5 $24.95 |
|
|
KENNAMETAL Carbide Inserts SPMT3252LF 9320 Qty 5 [204] $30.00 |
|
|
10 pcs. SANDVIK COROMANT S6 P40 CARBIDE INSERTS 91456 $11.99 |
|
|
10 pcs. SANDVIK COROMANT S6 P40 TNGN220408, TNG 432 CARBIDE INSERTS 91456 $11.99 |
|
|
10 pcs. SANDVIK COROMANT S6 P40 TPGN220412, TPG 433 CARBIDE INSERTS 91456 $11.99 |
|
|
KENNAMETAL SPEB-322 (SPCB-090308) CARBIDE INSERTS $24.99 |
|
|
9pcs Sandvik TLJF-3009L Carbide Inserts Gr. 225G $17.95 |
|
|
KAISER Carbide Inserts CC061615C8CTP51 Qty 10 [BN86] $35.00 |
|
|
5 new CIRCLE MACHINE CMGN-110-250-CM1 Grooving Carbide Inserts 58019 $60.86 |
|
|
NEW Dorian STUCR Boring SET TCMT Carbide Inserts I994 $150.00 |
|
|
30pcs.ISCAR ADKT 150524R-HM IC328 $240.00 |
|
|
KENNAMETAL Carbide Inserts TNMG333UP KC9240 Qty 5 [204] $25.00 |
|
|
Iscar GIFI 4.00E-2.00 IC635 Carbide Cut Grip Inserts Box of 10 $159.20 |
|
|
5 new CIRCLE MACHINE CMGN-110-250-CG5 PVD Coat Grooving Carbide Inserts 58020 $66.26 |
|
|
HERTEL Carbide Cut Off Inserts GTR 4 HT25 Qty 10 [406] $35.00 |
|
|
11 new CIRCLE MACHINE CMGN-110-250-TR1 PVD TiALN Grooving Carbide Inserts 58021 $151.80 |
|
|
Tungaloy SNMG150612 SNMG543 T6030 Carbide Inserts $179.99 |
|
|
5 new CIRCLE MACHINE CMGN-125-250-CG5 PVD Coat Grooving Carbide Inserts 58023 $66.26 |
|
|
W29 34130.0474 BK74 KOMET CARBIDE INSERTS CVD COATED (10PC) $69.99 |
|
|
Inserts $3.26 Inserts |
|
|
The 2006-2011 World Outlook for Indexible and Throwaway Inserts for Machine Tools and Metalworking Machinery Excluding Carbide and Ceramic Inserts $795 The latent demand for indexible and throwaway inserts for machine tools and metalworking machinery excluding carbide and ceramic inserts is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market. |
|
|
Ammco AMM940410 Bits Carbide 10Pk Pos Rake FmcJohn BeanBarrett $57.46 For FMC lathes. Carbide inserts positive rake. Pack of 10. High quality components. Huge selection to choose from. |
|
|
Carbide Sight Insert Cutter Carbide Sight Insert Cutter $71.99 We’ve had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we’ve had made cuts a 1⁄4" wide dovetail just right for sight inserts and the finished product is very precise. Since the cutter is small (it tapers to a diameter of .110") you must make an initial cut with a 1⁄8" end mill (listed below). By using the end mill to remove some metal first you’ll avoid overloading the cutter and breaking it. CAUTION: For use in milling machine only. Solid carbide 2" (5cm) long. 1⁄4" (6.3cm) diameter shank. 60° shoulder. Mfg: Brownells |
|
|
Carbide Putty $918.28 Carbide Putty |
|
|
Carbide Scrapers $13.31 Carbide Scrapers |
|
|
Gatco Knives / Great American Tool Co. 5120 Twin Carbide Knife Sharpener with SnapOn Logo $23.66 Illustrated SnapOn Logo On a Black SureGrip Handle. Premium Grade Tungsten Carbide Sharpening Bits. Quickly Sharpens PlainEdged Kitchen Sport and Utility Cutlery. Easy to Use. ABS Body with Kraton(R) Slip Resistant Grip. Replaceable Carbide Inserts |
|
|
GERBER 48252 Carbide Insert Replacement Kit for 800 Legend $29.12 Selected models of the Gerber tool line feature an extremely rugged tungsten carbide cutting insert. This triangular insert is particularly good for cutting wire or fishhooks or other similar materials. And because you ll be inclined to use the heck out of this cutter we figured it d smart of offer replacements. Carbide Cutter Insert Replacements come two to a pack and include a hex head wrench and four replacement screws for MultiPlierr tool itself. It might be a good idea of keep a replacement pack on hand. Because you just never know when you re encounter a whole lotta things that just beg to be clipped with the power of tungsten carbide. These inserts cut quick and clean and mean. Two tungsten carbide cutter replacements. Hex head wrench. Four replacement screws. |
|
|
Stock Inserts Inserts 10-Pak $29.95 CNC machined threaded brass bushings provide added strength and security for screwing down sling studs recoil pads and triggerguards in wood composite and fiberglass stocks. Lets you turn a screw in tight without the worry of stripping it out of the stock material. Heavily knurled on the outside to hold plenty of epoxy bedding for a rock-solid grip between the insert and stock. Kits available for mounting sling studs recoil pads and Remington ADL triggerguards plus a 10-pak of general use inserts. Mfg: Brownells SPECS: Brass knurled. ½" (12.7mm) long x 5⁄16" (7.9mm) diameter. All inserts have 10-32 tpi internal threads. Sling Stud Inserts – (2) inserts (2) steel dome-top sling studs matte blued. Recoil Pad Inserts – (2) inserts (2) ¾" (19mm) long stainless steel roun |
|
|
Rubber Inserts: D21Xd17XH15 Rubber Inserts 1Pc $1 Rubber Inserts: D21Xd17XH15 Rubber Inserts 1Pc |
|
|
CARBIDE CUTR $12.49 Pricing subject to change. CARBIDE CUTR |
|
|
BLANK INSERTS/ BLACK/ 25-PAK $67.99 BLANK INSERTS/ BLACK/ 25-PAK |
|
|
Evaporating Cooling Inserts $14.76 Evaporating Cooling Inserts |
|
|
Vulcan Bump Cap Inserts $6.31 Vulcan Bump Cap Inserts |
|
|
BOX Corrugated CD Inserts $41.23 BOX Corrugated CD Inserts |
|
|
RX 2000 Inserts $3.9 RX 2000 Inserts |
|
|
50PK CD CASE INSERTS $24.05 50PK CD CASE INSERTS |
|
|
Tungsten Carbide Bur Bits $39.92 Tungsten Carbide Bur Bits |
|
|
Carbide-Tipped Core Bits $393.55 Carbide-Tipped Core Bits |